HPS security/parking lights

MiSSMOllY91

Active Member
I just found out that parking lot lights where hps lights... well I am ripping at least 2 off tonight.... I just had some questions

1. i will prob be left with a bunch of loose wires that I will need to figure out how to wire to plug into the wall (ill post pics for help with this part.)

2. It must have a built in balast do you think its in the verry top with the bulb?

3. any one ever tried this... I think I might grab a blue MH one too
 

Salamandastron!

Well-Known Member
i believe the ballast is usually in the bottom of the lightpost. the fat, wider part right by the floor with the little panel in it....i wouldnt recommend doing that though...
 

Assault

Active Member
no,,dont do it...in the USA, unplugging it could disrupt the entire power terminal, resulting in a NASTY zap. and shorting out the other lights...

if you want to try, and are successful, besure not to touch the light itself. the oils from your hands with burn out the light.


WEAR ALOT OF RUBBER CLOTHING, AND BESURE TO BE GROUNDED
 

VictorVIcious

Well-Known Member
or ...don't give us all a bad name by being a thief. Lets see, MissMolly91. Let me guess, the year you were born, making you 16 now?? VV
 

Endoe

Well-Known Member
Too much trouble aswell. Most parking lights and security lights have a light sensitive switch. When it gets dark it comes on. You will have to replace this switch or your lights wont work. Plus you wont have a good reflector. The ballast is waaaaaay to close to the light itself. If its in an enclosed area it will get boiling hot.

In short, DONT FUCKING STEAL AND RUIN ALL OF OUR REPUTATIONS.
 

krime13

Well-Known Member
Ohh please, what reputations I hate to be an asshole that just comes out and sais this , but here it is anyway: 1) we are all anonimous here so what reputation? 2) Its a war on drugs out there people in case you didn't notice ,so why not use your enemy's assets to keep growing?3) I didnt grow enough balls to steal a city light till I was 20.As far as the mechanics of this thing, most of the streetlights have all you need right in the lighthead assemby, the part on top of the post, you will need an adjustible wrench and or a ratchet and a set of sockets (anywhere from 3/8 to 3/4) also you will need a pair of INSULATED wire cutters...the rest you will have to judge by the location/situation.Dont wory about the light sensor, it is easily bypassed, as far as the heat for the ballast its true, but that problem is easily solved by uscrewing the actual light socket out of the lighthead assembly and making it remote with jumper wires (simply splice in long pieces of wire , use a decent guage wire, always thicker/never smaller), finally, you will have to install a 110 plug that you will plug into the wall, you are on your own my friend cos lights do defer, there is usually a wiaring diagram right on the lighthead (if you cant figure it out, stop immideatly cos you obviously not qualified to do this), when you test your light make sure you use a socket with a good breaker,and vouala, you have a grow light! A couple of things to remember, make sure that cutting wires is the last thing you do, cos working around live power is no fun, make sure that the post ends of the cut wires do not touch ANYTHING when you are done, and above all, YOU DIDNT HEAR ABOUT IT HERE AND YOU DIDNT HEAR ABOUT IT FROM ME! Stealing lights is a risky buisness and in the long run, who wants to do 3 to 5 in the cell over a $500 light? As I got older, I gave it up, the risk just doesnt justify the means...If I were you I would just save up and buy one...also most street lights are only 250W , they get the job done but 1000W light is where its at!My advise to you DONT DO IT...PS scout the area and the human/vehicle traffic for like a week befoure you do the job if you absolutely HAVE TO steal...
 

4ad

Active Member
Forget about it...those lights are usually 480v anyway...I had a VERY experienced electrician friend who was killed by one of those a few years ago...he was working on one at dusk just when they came on....had a wife and 2 kids
 

JayAK47

Active Member
I only saw one post here that actualy helped this girl with what she wanted...

if she wants to steal a light instead of paying then she has her reason if she wanted the help you guys gave her then she would have talked to her mom....

and all you worried about this girl giving mary jane growers a bad name.. its a streat light she is taking nobody is going to connect that to growing weed.
 

Tokecrazy

Well-Known Member
It is stealing.If you would steal a light you will steal any thing.Mom gos in and turns on her pc and there the site she got the infor on heres how to do it.It's stealing you dont think about the consequent of stealing till you are caught.you wouldnt like it if somebody came and took your lights.dont do it save some money up and but it.PEACE
 
Top