⚠︎ Brother OneHitDone Gone VERTICAL ⇪

OneHitDone

Well-Known Member
What is your plan for the CBD's. FECO?
I would like to do a horizontal CBD grow at some point to make oil.
I am not sure what FECO is honestly :oops:
I make a lot of coconut oil extract that goes into chocolates for my woman.
This strain also smokes and vapes lovely - looks and smells like a top shelf THC strain, only you just get a very slight uplifted feel with all the benefits of CBD along with it. Makes your body, muscles, joints almost feel weightless. Very medicinal variety.
This is one of the few clones I have picked up because I wanted a known, tested outcome :hump:
 

gr865

Well-Known Member
I am not sure what FECO is honestly :oops:
I make a lot of coconut oil extract that goes into chocolates for my woman.
This strain also smokes and vapes lovely - looks and smells like a top shelf THC strain, only you just get a very slight uplifted feel with all the benefits of CBD along with it. Makes your body, muscles, joints almost feel weightless. Very medicinal variety.
This is one of the few clones I have picked up because I wanted a known, tested outcome :hump:
Full (plant) Extracted Cannabis Oil
Sure would be nice to have access to quality clones. Would like to make some oil from a good CBD strain.
 

OneHitDone

Well-Known Member
Well here we are at day 65 and it's just time. Would give these girls a little longer but due to timing and weeding out the last of some pest issues it's time to bring these down.
Who says you can't flower under Metal Halide? :lol:
Some very hight quality nugs up top on these lady's, I may need to build 1 Shelf Higher! :hump:
Off to the drying closet they go.....



DSC05335.jpgDSC05338.jpg DSC05340.jpgDSC05343.jpg


And I would definitely say the Ringo's Gift CBD is liking CX Nutrients :weed:

DSC05342.jpg
 

OneHitDone

Well-Known Member
Brother OneHitDone just checking in over here in the Vert Section and saying what's up to all the growers over here.
Still growing over here and have been surfing through some system revisions and finally feel that I'm rounding the corner to where I want my systems to be.
What I have finally come up with is an NFT system that has the channels filled with perlite and set up to drain to waste. After having a few unexplainable bouts of root issues in water culture I have decided to shelf that method for the time being.
Syterm is dialed so I can load 16 clones into 4 channels in veg and then just move them over to either 5x5 when I feel they are ready.
I have also incorporated some Vertical growing into both my veg and flower boxes. In veg I'm using wall systems for growing lettuce and other edible crops and in flower I'm using a wall system for producing my CBD varieties without getting in the way of main production.
Here's a few shots to catch up.

Veg Wall System:

IMG_5597.jpgIMG_5598.jpg

Flower Box setup:

IMG_5602.jpgIMG_5601.jpg

A little Blood Diamond OG getting close to flush time:

IMG_5603.jpg

Wall CBD Production:

IMG_5560.jpg

Channel is easily removable for training:

IMG_5577.jpg

Clones taking root for next round:

IMG_5578.jpg
 

OneHitDone

Well-Known Member
Quick update on the girls:
Things are looking really good. They just got a foliar so that's why their looking like they've been ridden hard and put away wet lol

View attachment 3679551 View attachment 3679552

@pinner420 thanks for the tip on the light mover modification. ;)
After you bringing that idea to my attention I decided to go that route since it will take less engineering and realistically be cheaper in the end.
I have a Light Rail 4 on the way!
@hybridway2 this was 5ml per gallon Flora Nova and NOTHING else on tap water!
 

OneHitDone

Well-Known Member
I've switched to Ushio lamps and have been running a 600W OptiBlue MH dimmed to 440W to cover my whole veg and have been very happy with the result.
Not to mention all of the killer greens I'm able to produce with the "Stray light" that would otherwise be reflecting off the wall.

IMG_5639.jpg59883554141__6AD36909-6182-49D7-9C6D-60D879841DE0.jpg
 

hybridway2

Amare Shill
Looking good Pizon!
Using the walls was a great idea to catch that lost light & make good use of it.
Really digging the CBD Wall bud!
This is where led track lighting would be useful/helpful or better yet just 1, 14w ,5k , screw in SPOT-LIGHT per cbd plant.
The 12-14w spot lights are so underrated.
Just cuz i know you don't believe & LED is a curse word in your house, i ask that you just do x2 so you can compare.
Being Spots & not Flood lights, they are lensed, focused, can be used from a distance & wont send stray light.
Highly recommend seeing the difference.
 

OneHitDone

Well-Known Member
Looking good Pizon!
Using the walls was a great idea to catch that lost light & make good use of it.
Really digging the CBD Wall bud!
This is where led track lighting would be useful/helpful or better yet just 1, 14w ,5k , screw in SPOT-LIGHT per cbd plant.
The 12-14w spot lights are so underrated.
Just cuz i know you don't believe & LED is a curse word in your house, i ask that you just do x2 so you can compare.
Being Spots & not Flood lights, they are lensed, focused, can be used from a distance & wont send stray light.
Highly recommend seeing the difference.
Killing me Homie :lol:
Have you forgot all the lettuce tests I did with single led spot lights? Those things get their asses handed to them by T5's.
No way they can compare to the light the cbd plants are currently getting from a 1000W lamp.
Plus I'm just done with the lite-brite led wiring jungle bs. Those lamps lack Far Red which we both know is very important to not grow bonsai plants :peace:



DSC05322.jpgIMG_3421.jpg
 

OneHitDone

Well-Known Member
Thought I'd drop in a little update over here.
Start of week 4 for these Green Cracks

DSC05649.jpgDSC05650.jpg

CBD Wall plants are also coming along nicely.

DSC05651.jpg


Flushing on these Blood Diamond OG's and should be harvesting in the next week.

DSC05654.jpg


Over in veg I am all reloaded for the next round with Cherry Pie and will top them in the next few days so they are ready when the Blood Diamond is harvested.

DSC05657.jpg

Time for some East Coast meets West Coast - Gonna run some Fuel Bomb, compliments of brother @hybridway2 ;)

DSC05658.jpg
 

gr865

Well-Known Member
Thought I'd drop in a little update over here.
Start of week 4 for these Green Cracks

View attachment 4445211View attachment 4445212

CBD Wall plants are also coming along nicely.

View attachment 4445213


Flushing on these Blood Diamond OG's and should be harvesting in the next week.

View attachment 4445214


Over in veg I am all reloaded for the next round with Cherry Pie and will top them in the next few days so they are ready when the Blood Diamond is harvested.

View attachment 4445215

Time for some East Coast meets West Coast - Gonna run some Fuel Bomb, compliments of brother @hybridway2 ;)

View attachment 4445216
Looking GR8 there my friend.
Will you cut the undergrowth below the screen as the plants get taller?
Going to do an update today also.
 

diggs99

Well-Known Member
There's 2 layers of trellis there and they are clean below the bottom layer.
This variety didn't shoot for the moon stretch like I was expecting but the space is filled pretty well .
Looks great man, nice job.

I was curious about the wall setup, how are those plants fed? is that like a nft hybrid or what? You have probably mentioned it already, pardon my laziness lol

Very clean job on everything tho, best of luck
 

OneHitDone

Well-Known Member
Looks great man, nice job.

I was curious about the wall setup, how are those plants fed? is that like a nft hybrid or what? You have probably mentioned it already, pardon my laziness lol

Very clean job on everything tho, best of luck
Yes, it is a channel that would normally be set up for nft but I just made some "Stops" for then ends of the channel (drainage holes on the downhill side obviously) and fill the channel with straight perlite.
It is fed by a single line on the uphill side of the channel. Waters twice a day to runoff.
The system is performing flawlessly and eliminates the water culture root system disease woes.

You can see the nutrient feed line on the left end of the channel in this pic
IMG_5560.jpg
 
Top