World Of Hempy

808killahz

Well-Known Member
I found a pic of the 4 inch pipe hempys... had bunch of pipe laying around so i ended up using them. They make a plug for this pipe which allows it to stand flat. I just glued the cap in place and drilled a hole. Work like a charm.

2012-09-16_11-36-18_130.jpg
 

sky rocket

Well-Known Member
Hey jela ill take some natural light pics and post them this week. Btw how was the stretch of the c99. I got some c99, pineapple express and holy grail kush on the way. All inspired by your great pics and short story review. Gonna run them after my next sog.
808 I just popped 3 p.e's for future moms yesterday for sog along with 3 holy grail kush for my first ever all coco grow. Keep us posted.
 

Attachments

azores

Member
I found a pic of the 4 inch pipe hempys... had bunch of pipe laying around so i ended up using them. They make a plug for this pipe which allows it to stand flat. I just glued the cap in place and drilled a hole. Work like a charm.

View attachment 2522296
hey killahz - are you talking about the 4" end cap that slides over the od of the 4" pipe or the 4" id cap, which I've only seen in threaded? This seems like a great idea instead of 2l soda bottles. Just easier to move around and sturdier. And. The best part, no need paint to protect the roots. Thx
 

Txchilies

Well-Known Member
Right on Tex! Nice to see another 2g & 3.5g bucketeer on board...hopefully your efforts will be be rewarded with bigger root systems, bigger plants and higher yielding buds.... and less work watering....as a matter of fact I can help you relax that feeding freq. when it gets old, just PM me. I think you are working too hard.....you need time to enjoy life and the fruits you produce.
Thanks Jela, I may take you up on that soon, but for now I rather enjoy it. Spending time in the garden is relaxing to me, I can spend hours fiddling with my girls. :weed: It will be interesting to see how the buckets do, as my last grow was all soil organic done 5 plants mainlined for 8 tops and averaged 5 1/2 oz per plant.
 

808killahz

Well-Known Member
hey killahz - are you talking about the 4" end cap that slides over the od of the 4" pipe or the 4" id cap, which I've only seen in threaded? This seems like a great idea instead of 2l soda bottles. Just easier to move around and sturdier. And. The best part, no need paint to protect the roots. Thx
No they dont go over the OD. They fit on the inside. Ill take a pic of the cap when i get home. You can pick them up at home dept or lowes for like 30 cents each. And yes they are indestructible. You probably will never have to get new ones. However if you are thinking about buying 4 inch pvc, they can get pricey... i was lucky to have a few 10 foot pieces laying around.
 

Txchilies

Well-Known Member
No they dont go over the OD. They fit on the inside. Ill take a pic of the cap when i get home. You can pick them up at home dept or lowes for like 30 cents each. And yes they are indestructible. You probably will never have to get new ones. However if you are thinking about buying 4 inch pvc, they can get pricey... i was lucky to have a few 10 foot pieces laying around.
Commend you on the enginuity, cheap and easy. 4" pvc isn't that expesive, at least sched 40 the white stuff and they make an end cap that goes over the OD of the pipe that is flat. The walls aren't as thick which would give alittle more room for growing. I looked at trying it with 6" septic pipe which is only 1/16" to 1/8" wall thickness. Couldn't justify cutting the pipe up to do it.
 

808killahz

Well-Known Member
Commend you on the enginuity, cheap and easy. 4" pvc isn't that expesive, at least sched 40 the white stuff and they make an end cap that goes over the OD of the pipe that is flat. The walls aren't as thick which would give alittle more room for growing. I looked at trying it with 6" septic pipe which is only 1/16" to 1/8" wall thickness. Couldn't justify cutting the pipe up to do it.
I guess prices in hawaii might be a little more. 10 foot 4 inch pipe like i used was priced at 40 bucks... either that or im a cheap ass and find that to be over priced. Lmao!!!
 

azores

Member
No they dont go over the OD. They fit on the inside. Ill take a pic of the cap when i get home. You can pick them up at home dept or lowes for like 30 cents each. And yes they are indestructible. You probably will never have to get new ones. However if you are thinking about buying 4 inch pvc, they can get pricey... i was lucky to have a few 10 foot pieces laying around.
I am in hi too & went by diamond head sprinkler this afternoon with some returns. The thin wall PVC 4"x20', $54. Abs is cheaper but I don't know if that might leach into nutrient solution? I have some 3" thin wall PVC I use for gutter downspouts, I'm going to see if it leaks light.
 

WattSaver

Well-Known Member
Any ABS or other thin walled pipe will let the light through (white or green). Most likely your cheapest route would be to go to a electric supply outlet, and buy the gray schedule 40 elect conduit.

Edit;

But free pipe with a little paint or tape may be the true value ;-)
 

808killahz

Well-Known Member
Any ABS or other thin walled pipe will let the light through (white or green). Most likely your cheapest route would be to go to a electric supply outlet, and buy the gray schedule 40 elect conduit.

Edit;

But free pipe with a little paint or tape may be the true value ;-)
The black septic pipe i use is pretty thick. No light penetration. Only place light could leak through is from the cap at the bottom. However the bottom is not exposed to light at all because it sits flush with the floor.
 

jela10

Well-Known Member
The black septic pipe i use is pretty thick. No light penetration. Only place light could leak through is from the cap at the bottom. However the bottom is not exposed to light at all because it sits flush with the floor.
808, Im so glad you finally brought pics of your Hempy Cannon's over to WOH...I knew these cats would love it.
 

Evo8Emperor

Well-Known Member
For an even cheaper alternative there is the black irrigation pipe that is even cheaper and you can get it with or without holes for some drainage or air pruning like air pots. lol.
 

Moebius

Well-Known Member
Hello WoH

I just want to recommend a small piece of equipment. Its a water circulator. I use it in my nutrient tank and it circulates a current in my tank 24/7. I think its great because it makes NO NOISE or HEAT and has low power consumption (10w max). It means that I have no salt build-ups or surface slick what-so-ever and can mix up large amounts of solution in one go without worrying it may spoil, this has saved me lots of time ... The solution literally looks like you have just mixed it.

Some may say, 'I just use a stick and stir', I tried that but once a slick or salt buildup occurs its almost impossible to stir it all back together like it was.



Newave - Circulation Pump
  • Why didnt they make these earlier??
  • Circulates your nutrient solution at very high volumes
  • No more sediment left floating on top of solution
  • No more sediment rings left around the tank
​Available in 3 sizes:
  • Adjustable 800-1600L/hr
  • 2700L/hr
  • 3900L/hr

EDIT:
The model I use is the smallest for my 84L bin. Its power consumption is 2.6w.
 

CaptnStinky

Member
DSC06458.jpg High! First post here. I have been a long time lurker on this and other forums - not much of a poster.

I have been using 4"x8" and 6"x12" cylinder mold hempy buckets for a couple years - they work well for my small (legal) closet set-up.
They are manufactured by MA Industries - made in the USA and came with lids+++. They are made for strength testing of concrete.
I use a Phillips screwdriver to push a hole (while under hot water) and push tubing through -while also under hot water, this makes a water tight seal with no glues or adhesives.
Have a great day & thanks for all the great info on this board!!!!!!!!
 

CaliMackdaddy

Active Member
Hello WoH

I just want to recommend a small piece of equipment. Its a water circulator. I use it in my nutrient tank and it circulates a current in my tank 24/7. I think its great because it makes NO NOISE or HEAT and has low power consumption (10w max). It means that I have no salt build-ups or surface slick what-so-ever and can mix up large amounts of solution in one go without worrying it may spoil, this has saved me lots of time ... The solution literally looks like you have just mixed it.

Some may say, 'I just use a stick and stir', I tried that but once a slick or salt buildup occurs its almost impossible to stir it all back together like it was.



Newave - Circulation Pump
  • Why didnt they make these earlier??
  • Circulates your nutrient solution at very high volumes
  • No more sediment left floating on top of solution
  • No more sediment rings left around the tank
​Available in 3 sizes:
  • Adjustable 800-1600L/hr
  • 2700L/hr
  • 3900L/hr

EDIT:
The model I use is the smallest for my 84L bin. Its power consumption is 2.6w.
Awesome find, whats the lowest tier they sell, how much? Which model do you think would do well in my 20gal res? Got a website that sells them, id love a link.. its exactly what i needa get atm.. those water pumps generate soooo much heat i hate running them.
 
Top