DreManSpliffMan
Active Member
hey i was thinking about making hash so i read up about the different ways to do it and i was wondering which way gives the hash with the least amount of plant leftovers . . . . ?
Hash newbie
- Thread starter DreManSpliffMan
- Start date
mrCRC420
Well-Known Member
hash with the least plant matter is all determined by the quality of the kief you buy/collect. Using a small screen to collect the kief will greatly decrease planty shit in your hash.
I collect kief, put it in the cut-off corner of some cellophane, tape it up tight, wrap some papertowel around it, soak it in hot water, put it in the oven at 175F for 10min, then use a rolling pin to flatten it out. I repeat the hot water, oven, rolling procedure 4-5 times (40-50min in oven total). Then pop it in the freezer to firm up for 24 hrs. Good shit.
Then i use that bottle cap, pin, bottle method to smoke it. My fav hash techniques.
I collect kief, put it in the cut-off corner of some cellophane, tape it up tight, wrap some papertowel around it, soak it in hot water, put it in the oven at 175F for 10min, then use a rolling pin to flatten it out. I repeat the hot water, oven, rolling procedure 4-5 times (40-50min in oven total). Then pop it in the freezer to firm up for 24 hrs. Good shit.
Then i use that bottle cap, pin, bottle method to smoke it. My fav hash techniques.
NewGrowth
Well-Known Member
I heard of a guy in Jamaica that runs through the fields with a celophane suit on an then he harvest hash of the suit. Its like crazy running man finger hash! But to answer your question the most pure has is probably bubble hash the finer filters give you the higher grade hash with almost zero plant material.
NewGrowth
Well-Known Member
i went to the cannabis club the other day to do my thing. i was in the back office. she had a medium sized tupperware bowl sitting on the desk. it was full. had to have been a couple 1000 grams. looked golden. some premium stuff. she said the guy that makes it is blind. i was very impressed. 
screening will give you the best control over how much debri is in the final product. you can be a screen set with several screens that will separate it all for you. somewhat expensive though.
screening will give you the best control over how much debri is in the final product. you can be a screen set with several screens that will separate it all for you. somewhat expensive though.
chuckbane
New Member
Not hash but very potent
is hash... hash oil... noone said pressed hash... personally i believe the two most potent forms of hash are bubble hash and honey oil... i just like the taste of honey oil better
im not a fan of the water separation method or the separate by density method
solvents all the way!
solvents gets you meth charges. just so you know. not actual "meth" charges but the same classification. if the feds find an extractor they tack on serious felony charges. i'm crushing mine.
"Hashish (from Arabic: حشيش ḥashīsh, lit. "grass"; also hash) is a preparation of cannabis composed of the compressed trichomes collected from the cannabis plant." Hashish - Wikipedia, the free encyclopedia
hash is trichomes pressed together. honey oil is different. once you use a solvent it's no longer hash.
chuckbane
New Member
i guess you missed this part FDD
from: Hashish - Wikipedia, the free encyclopedia
"Chemical separation methods generally use a solvent to dissolve the desirable resins in the plant while not dissolving undesirable components. The solid plant material is then filtered out of the solution and discarded.[1] The solvent may then be evaporated, leaving behind the desirable resins. As THC is fat-soluble, it also dissolves in butter, which can then be used for cooking (see hash cookies and Alice B. Toklas brownies).[2] The product of chemical separations is more commonly referred to as honey oil, hash oil, or just oil. Some believe that hash oil is best avoided, due both to the dangerous nature of its production and the fear of residual chemicals left in the oil by the solvent."
from: Hashish - Wikipedia, the free encyclopedia
"Chemical separation methods generally use a solvent to dissolve the desirable resins in the plant while not dissolving undesirable components. The solid plant material is then filtered out of the solution and discarded.[1] The solvent may then be evaporated, leaving behind the desirable resins. As THC is fat-soluble, it also dissolves in butter, which can then be used for cooking (see hash cookies and Alice B. Toklas brownies).[2] The product of chemical separations is more commonly referred to as honey oil, hash oil, or just oil. Some believe that hash oil is best avoided, due both to the dangerous nature of its production and the fear of residual chemicals left in the oil by the solvent."
chuckbane
New Member
solvents gets you meth charges. just so you know. not actual "meth" charges but the same classification. if the feds find an extractor they tack on serious felony charges. i'm crushing mine.
not in my country.. maybe in the "good 'ol U S of A" though
NewGrowth
Well-Known Member
I prefer nice blonde bubble hash myself. Just a personal preference. I had no idea about meth charges with extractors! Thanks fdd2blk
KillerWeed420
Well-Known Member
BHO is definitely the smoothest hash. And it is hash. Bubble hash still is fairly harsh. I never been a smoker so smooth works for me.
colonel cronic
Active Member
you're so fukin right
wheelerman420
Well-Known Member
ACTUALLY.....Here in arkansas, when I used to cook, We used any damn thing we could get our hands on. Shit ive used green coleman lantern fuel, Kinda oily in the end, but it works. lol BUT thats been over 4 yrs ago, I have no idea what they use now as I had to grow up and quit that shit.
Last edited:
chuckbane
New Member
There's a great blender hash method in the DIY section
i tried that once,.... i dont know what went wrong but lets just say a couple ounces of bag was ruined... dont ask me how but i ended up with a thick green paste at the end.... ill stick to my solvents ... lol
chuckbane
New Member
could you cook it with a regular butane bottle? that would be hella dangerous considering the style of applicator on those... kaboom,,,,,, but i guess a lot of motherfuckers have gone up that way
chuckbane
New Member
There's a great blender hash method in the DIY section
Sorry dude. I was being sarcastic.
When I asked someone whom I thought was a friend to help me out when I made my first attemp I was sent to the 'Do it youself threads.'then comes back to tell me my hash was garbage.
Yes I had added some nice buddage to this as well.
huh? i'm so confused :S.. i just dont think that method is best.. even when you do it right... my opinion
Similar threads
