Shatter

dabhe4d said:

I get shatter with 95 - 115F 9 hours

Click to expand...

Your shit aint done…. fuck I probably could smell that it wasn't done just by you exhaling. 9 hours even with the pump on the hole time in a $3000 vac oven isn't going to be long enough especially at those temps…. I pity your health. I'm sure you claim it's clean but had it tested? 5+ days flipping it every 24 hours or so at 95-105 to get real deal shatter that is purged about as much as it can get (below 25ppm)

ULEN said:

How do you loose the soft texture without a vac? It has a gummy texture to it and sticky.

Pockets a little light atm so I can't just go out and buy one yet.

Click to expand...

best thing I could think would be keeping it on a griddle at like 95-100 degrees and in a sunny window for a few weeks… don't think you'll get rid of the gummy ness though and even with the best equipment some strains just won't shatter… high CBD strains tend to have a hard time going full shatter at a normal (72 degrees) room temp…

Grojak said:

Your shit aint done…. fuck I probably could smell that it wasn't done just by you exhaling. 9 hours even with the pump on the hole time in a $3000 vac oven isn't going to be long enough especially at those temps…. I pity your health. I'm sure you claim it's clean but had it tested? 5+ days flipping it every 24 hours or so at 95-105 to get real deal shatter that is purged about as much as it can get (below 25ppm)

Click to expand...

Can you post some pics of this shatter that's been purged for 5+ days? Would like to see what it looks like

Sent from my HTC One using Rollitup mobile app

oil tips should be shared to all, the safer everyone is about it the less heat we're going to see from media and law… I know in WA and in Cali "operation shattered dreams" has put many people on the DEA's list because they caused an explosion or fire even though the states don't outlaw this activity (yet).

beginner420 said:

Can you post some pics of this shatter that's been purged for 5+ days? Would like to see what it looks like

Sent from my HTC One using Rollitup mobile app

Click to expand...

Actually I can't deleted any I had online out of fear (see above post)… but do some digging you'll find i'm not the only one preaching this.

Grojak said:

Your shit aint done…. fuck I probably could smell that it wasn't done just by you exhaling. 9 hours even with the pump on the hole time in a $3000 vac oven isn't going to be long enough especially at those temps…. I pity your health. I'm sure you claim it's clean but had it tested? 5+ days flipping it every 24 hours or so at 95-105 to get real deal shatter that is purged about as much as it can get (below 25ppm)

Click to expand...

lol okay thanks? ill put it back in the vac...thanks for the tip..........
i never claimed my shatter to be clean, like i said it was my first time using my vac.
where was your cunty ass 5 day purge comment in my thread about using my vac properly? I did what i was told.

I dont think it looks bad enough to pitty my health... pretty ignorant

Grojak said:

temp determines more of what your final product will be (shatter / wax / sap) than it does color.

Click to expand...

heat up some gold oil past 160 for an hour or 2 and it will be darker.

dabhe4d said:

View attachment 3289153
I dont think it looks bad enough to pitty my health... pretty ignorant

Click to expand...

Ignorance will make you sick man, but don't take my word for it, you keep smoking you shit. Since when does color determine purity? You did good on material, I assume it was no more than 2 weeks from harvest, but that does not make it clean. Using a dab works / slick pad whatever brand it's called the flip is even more important, I find those damn things seem to prevent a lot of the purging, hence flipping it over every 24 hours or so.

I saw some stuff that looked killer a mmj grower had processed from a "oil producer" shit came back 1100ppm but it looked amazing.

Twitch. said:

heat up some gold oil past 160 for an hour or 2 and it will be darker.

Click to expand...

OK but why would you heat it to 160, even for wax thats way to high? Messed that up once, If you run too hot you'll wax your shit before it's purged…. good luck getting it cleaned up after that (17 day purge did the trick lol).

Grojak said:

Ignorance will make you sick man, but don't take my word for it, you keep smoking you shit. Since when does color determine purity? You did good on material, I assume it was no more than 2 weeks from harvest, but that does not make it clean. Using a dab works / slick pad whatever brand it's called the flip is even more important, I find those damn things seem to prevent a lot of the purging, hence flipping it over every 24 hours or so.

I saw some stuff that looked killer a mmj grower had processed from a "oil producer" shit came back 1100ppm but it looked amazing.

Click to expand...

so I should purge my 2.5 grams of bho for 5 days?

Grojak said:

OK but why would you heat it to 160, even for wax thats way to high? Messed that up once, If you run too hot you'll wax your shit before it's purged…. good luck getting it cleaned up after that (17 day purge did the trick lol).

Click to expand...

day 2 of purging..
patty hasnt muffed in a day
3 days to go..?

Grojak said:

OK but why would you heat it to 160, even for wax thats way to high? Messed that up once, If you run too hot you'll wax your shit before it's purged…. good luck getting it cleaned up after that (17 day purge did the trick lol).

Click to expand...

I am pointing out the fact that heat will change the color.... you sound like someone who is just regurgitating info you have heard or read.....

Grojak said:

good luck getting it cleaned up after that (17 day purge did the trick lol).

Click to expand...

just re-dissolve the wax in ever clear and the do a thin film purge it will be shatter and it will be be purged

Twitch. said:

I am pointing out the fact that heat will change the color.... you sound like someone who is just regurgitating info you have heard or read.....

Click to expand...

OK and you sound like someone who hasn't read much There is no reason to heat to 160, 2nd day of purge WTF is that? Patty only muffs for the first 5 minutes or so, day 2 you flip it over, same heat you will get action. 160 is just to fuckin hot, even if you're making crumble.

once again your ignorance has allowed you to miss the point.... and you obviously haven't read through the C&E section because, this is the main area I am in and I have contributed and still contributed good information to the section.

since you are having trouble under standing what I have said I will explain it more in detail.
so take 2 ounces of weed and blast them both, then take half of the oil and purge it at 90 to 95 F, then take the other half of the oil and purge it at 120 to 130 F. Then take picture post it and tell me which one is darker...

I agree no reason to ever get your oil that high unless de-carbing the oil..... it was a point I was trying to make that you clearly missed.

dabhe4d said:

day 2 of purging..
patty hasnt muffed in a day
3 days to go..?

Click to expand...

what temps are you running how long have your purged it already?
your stuff is probably done this guy is a moron...

Grojak said:

OK but why would you heat it to 160, even for wax thats way to high? Messed that up once, If you run too hot you'll wax your shit before it's purged…. good luck getting it cleaned up after that (17 day purge did the trick lol).

Click to expand...

Too hot I agree on.

Results, darkened product due to decarboxylation.

Twitch. said:

what temps are you running how long have your purged it already?
your stuff is probably done this guy is a moron...

Click to expand...

it was on 110 for 9 hours untill it stopped muffing. buddy said it wasn't done, so i had it on for another 10 hours @ 110F..

do you de-vac the chamber and let the slab sit for a little bit and then turn the vac back on?