Shatter E-CIG Oil, Yes, it works!
- Thread starter lowryderlove
- Start date
thats the stuff
BiggieNuggz
Active Member
Not really. It's still looking good 24 hrs later. Still the same cloudiness and viscosity. And I can really see no solids in it. It's a little weak. Takes 7 to 10 vapes to get good and zapped but for my first batch ever I couldn't be happier. I'll probably back off to 5 ml total next time instead of 6 ml so its more like 5 to 7 vapes to get the same effect. Or maybe even 4 ml for a really good kickin' juice. A lot has to do with the strain and potency of the hash as well I'm sure. Lots of experimenting to look forward to.
you must have t mobile with all those update downloads going on
lio lacidem
Well-Known Member
@ goalie, not sure where you are located but out my way alot of the head shops carry pg and vg.
lio lacidem
Well-Known Member
I would ask your local shop , i know the ones in pa keep it behind counter but do have it
Flagg420
Well-Known Member
Just sayin' got a bottle of PG off amazon, my glass stir rod from my airizer, shotglass, coffee mug warmer, a 3.5ml pipette... and a half-gram of good shatter from the local shop. (Lemon OG)
Little nervous @ first (put the oil in @ around 135) but when it hit 140-141, with a lil mixing, dissolved right the hell in, n stayed dissolved. Flavor even came thru a bit was rather nice, but I plan to get some flavor oils for future batches. Next batch will be stronger tho, I want it to kick my ass
Props on the easy mode method tho, and the coffee mug warmer works awesome.
Little nervous @ first (put the oil in @ around 135) but when it hit 140-141, with a lil mixing, dissolved right the hell in, n stayed dissolved. Flavor even came thru a bit was rather nice, but I plan to get some flavor oils for future batches. Next batch will be stronger tho, I want it to kick my ass
Props on the easy mode method tho, and the coffee mug warmer works awesome.
BiggieNuggz
Active Member
Ha! You and me both. You mention the 3.5ml pipette. Is that the amount of PG you used to your 1/2 gram of shatter? My first mix was a gram to 6ml PEG/PG total and it's a little weak and slow to come on. My next batch will be probably a gram to 3..5 ml liquid, 4 ml max. I was nervous too dropping perfectly good wax into PEG (I heated the PEG up first) but when it melted almost instantly in the hot liquid and mixed in clean and smooth I knew I was in for vape heaven.
UncleReemis
Well-Known Member
it felt like a power surge hit my penis when charface verified, so id like to verify as well..
I made mine a little strong: 0.5 g shatter into about 1.5 ml PEG USP 400 kosherrr. Did not use a thermometer, used a shot glass, sauce pan, gas oven, and stirring stick. I put two inches of already hot water in the pan with my shotglass of PEG, allowed the PEG to reach the heat of the hot water, then turned on the burner as low as possible without going out. Took about 10 mins to get the shatter melted and the mixture uniform. I stirred it even more for a few minutes extra, let it cool for 5-10, loaded it into a cleaned cartridge and wallah. 4-5 good draws and I'm garfielded out. Thank you folks who shared all the information here.
I made mine a little strong: 0.5 g shatter into about 1.5 ml PEG USP 400 kosherrr. Did not use a thermometer, used a shot glass, sauce pan, gas oven, and stirring stick. I put two inches of already hot water in the pan with my shotglass of PEG, allowed the PEG to reach the heat of the hot water, then turned on the burner as low as possible without going out. Took about 10 mins to get the shatter melted and the mixture uniform. I stirred it even more for a few minutes extra, let it cool for 5-10, loaded it into a cleaned cartridge and wallah. 4-5 good draws and I'm garfielded out. Thank you folks who shared all the information here.
hi? where can i buy PG?
polypropylene glycol is ppg every one just shortened it when the e cig industry moved from polyethylene glycol
and they just had pg and vg but really its ppg, and vg(vegetable glycerin),,,, I know weve cleared this up a while ago
i just wanted to add it here for others with same question
Grow Goddess
Well-Known Member
I have been making my e-cannabis oil lately using PEG400 NF/USP from Texas Lab Supply. I have been mixing my concentrate with the PEG400 NF/USP along with NF Organic flavorings from High Desert Vapes. With this mixture it is very thick. I have found that it works best for me in an AeroTank Mini with a 1.5 ohm coil and an eGo C Twist VV battery.
I am really liking the raspberry and also banana nut. It is far better than I thought it would be using flavorings. At first I was against it. Now that I have been using them, I think I prefer it. Adds more stealth when out and about too!
I am really liking the raspberry and also banana nut. It is far better than I thought it would be using flavorings. At first I was against it. Now that I have been using them, I think I prefer it. Adds more stealth when out and about too!
you can get the bud touch vaporizer cartridges on ebay now they are the ones O.pen uses cause they are small bottom fed cartridges and u can put your mix in there for less waste then the normally available bigger tanks, just search bud touch vaporizer cartridges,,they are cheaper there then fromJust sayin' got a bottle of PG off amazon, my glass stir rod from my airizer, shotglass, coffee mug warmer, a 3.5ml pipette... and a half-gram of good shatter from the local shop. (Lemon OG)
Little nervous @ first (put the oil in @ around 135) but when it hit 140-141, with a lil mixing, dissolved right the hell in, n stayed dissolved. Flavor even came thru a bit was rather nice, but I plan to get some flavor oils for future batches. Next batch will be stronger tho, I want it to kick my ass
Props on the easy mode method tho, and the coffee mug warmer works awesome.
whitewidows
New Member
Sounds like you got this down pat...What ratio are you mixing at and how much flavor are you adding? Any problem with your tank clogging? How does it hold up in the tank over time? I think Im going to give this a try. Seem like this could be a huge revolution to consume extracts if its a convenient as consuming ejuice.
These guys clam to be mixing at a 1:1 ratio
Grow Goddess
Well-Known Member
The ratio depends upon the type of concentrate you plan to use. The oil I make can come out different thickness depending on the strains I use.
I guess when using the PEG400/NF USP it is about 1:1 When adding the flavoring that depends too, different concentrated flavors (NF Organic), the strength is different. On average 1 to 5 drops per mL of e-cannabis oil. I only use NF Organic flavors
With PG USP I only use about 70% cannabis oil and 30% PG USP. With shatter it will be a different ratio. I have been working with QWISO and RSO.
So far my AeroTank mini has not clogged. I have had to replace coils here and there. I generally replace them every 2 tank fills. The cost is low enough about $2 each. Sometimes I will replace them every tank full because I am trying a new flavor and do not want the old coil to interfere with the new flavor.
I have not done much experimenting with it but it seems that you can mix PEG400 NF/USP and PG USP with the concentrate as another method. It all depends on what clearomizer I plan to use on the mixture I prefer. For PEG I have found the AeroTank Mini to work best due to the mixture being quite thick.
I have noticed that going back to smoking joints it brings on a bit of a cough. When I just use the vaporizer, no cough and it feels like I have a new pair of lungs. My lungs feel as if I never smoked cigarettes even though I did for about 30 years. I would have to credit the vaporizer for that. Can't prove it, but sure seems that way.