LED Companies w/ LINKS
- Thread starter Beefbisquit
- Start date
FranJan
Well-Known Member
Taken From VIPAR's site. Funny how a UK based company measures/advertises in feet but whatever, I'm assuming the readings came from the factory. What equipment they used isn't there on their site. Bottom line, without independent testing or a low cost universal way to duplicate a company's advertised readings it's basically marketing hoo-ha. Companies that are serious need to spend more time showing people how their products work and most importantly how to replicate their panel's abilities. And no offense Tags, thanks for the info btw 
, but I just had to add my little ole opinion.
, but I just had to add my little ole opinion. Vipar B4x4 - 1 FT : 2100 - 2 FT : 1300 - 3 FT : 725 - 4 FT : 510 - 5 FT : 400 | VIPAR B3X3 - 1 FT : 2010 - 2 FT : 950 - 3 FT : 510 - 4 FT : 350 - 5 FT : 250 |
| VIPAR B2X3 - 1 FT : 1300 - 2 FT : 500 - 3 FT : 250 - 4 FT : 190 - 5 FT : 140 | VIPAR B2X2 - 1 FT : 1000 - 2 FT : 350 - 3 FT : 190 - 4 FT : 115 - 5 FT : 90 |
tags420
Well-Known Member
^^^not quite sure what you mean/how to take that. Am I doing good or no? I'm trying to get it into my room to show.
Those vipar's have some good numbers though. Wonder how it does at the outskirts of the coverage? And what chips or are they using a X lens like hydrogrow's.
Those vipar's have some good numbers though. Wonder how it does at the outskirts of the coverage? And what chips or are they using a X lens like hydrogrow's.
PSUAGRO.
Well-Known Member
^^ the froggy has spoken........you know those #s are exaggerated, remember the Bysen"novagrow"Helios panels pushing 3000umol @a foot, and claiming its stronger than the sun...ha.
Those generic Chinese leds are Not going to get those # ATM.....even with 30 degree lenses
Yeah your right Apache shows no proof of hitting those numbers on the new panels......Tags is just doing what he's got too do
.....remember DAwg's old quote Fran?
Those generic Chinese leds are Not going to get those # ATM.....even with 30 degree lenses
Yeah your right Apache shows no proof of hitting those numbers on the new panels......Tags is just doing what he's got too do
.....remember DAwg's old quote Fran?
FranJan
Well-Known Member
| PAR values for an SGS-160 in flowering mode (actual power draw 155w): 12" 1216 Umol'/s 18" 777 Umol'/s 24" 534 Umol'/s 36" 335 Umol'/s | PAR values for an SGS-160 in veg mode (actual power draw 120w): 12" 866 Umol'/s 18" 530 Umol'/s 24" 341 Umol'/s 36" 198 Umol'/s | PAR values for the 400w HPS (actual power draw 461w): 12" 1423 Umol'/s 18" 840 Umol'/s 24" 550 Umol'/s 36" 365 Umol'/s |
Here's A51's. I like the way they include a 400 HPS/MH to compare to their offering. It really helps to see how a panel compares to HPS, a much better understood indoor growing technique, and it helps to show how sensitive/accurate the device one's taking readings with is. In other words I'm just sayin' that it would be easier to sell panels by showing people how they perform in a way that's accessible to your market. So now that you bring it up, how does Apache Tech get their readings?
And P if the C's do hit those numbers, they do it with a lot more draw than Apache/A51 does, so you pay more running them, plus using less efficient diodes always results in less yield. Especially because of the heat they will put out, which you might know a little about
. Sooner or later though they will perform well enough to grow effectively. How will the modern panel maker stay ahead?"If It Smells Like Hell, Drop The Bitch In A Well." That one
?
tags420
Well-Known Member
I say it all the time...apache's website blows. I want to know all those kinda of things so I call and ask. He does the readings with a licore par meter in a huge non-reflective room. I use the growers house 1000w test to compare things too all the time. They also have a bunch of "top" led's tested to. They use a par meter and show readings all over the foot print at different height, not just peak. It's a really good way to see how the light is performing all over. They are all in my thread post #69 and also the at660 test like that I did myself is in the tread too, post #86.
I like apache obviously, specially now that they are fill the bigger growers needs. But I think everyone also knows that a51 is my #2 pick. They make some good lights at a great price and his website is like looking in my own mind. It's just isn't different really from the AT120's I already have had for a while. And I needed something bigger.
I don't really know where I am going with this other than, Apache, A51... fuck ya America!
But seriously when you look for the best quality lights available on the market you basically come down to Apache and A51. umol/w and quality components throughout they blow the rest away IMO.
I would like to see a normal person using a illumitex. The light I saw at the max yield show wasn't coming out till october, but it did 800+umols at 12" everywhere on a 4x4, I tested it. It is what rocky mountain high tested in that hightimes video.
Edit:
[video=youtube;oA-7fN-XfYQ]http://www.youtube.com/watch?v=oA-7fN-XfYQ[/video]
I like apache obviously, specially now that they are fill the bigger growers needs. But I think everyone also knows that a51 is my #2 pick. They make some good lights at a great price and his website is like looking in my own mind. It's just isn't different really from the AT120's I already have had for a while. And I needed something bigger.
I don't really know where I am going with this other than, Apache, A51... fuck ya America!
But seriously when you look for the best quality lights available on the market you basically come down to Apache and A51. umol/w and quality components throughout they blow the rest away IMO.
I would like to see a normal person using a illumitex. The light I saw at the max yield show wasn't coming out till october, but it did 800+umols at 12" everywhere on a 4x4, I tested it. It is what rocky mountain high tested in that hightimes video.
Edit:
Not the official test but better than most.Yeah your right Apache shows no proof of hitting those numbers on the new panels......Tags is just doing what he's got too do
[video=youtube;oA-7fN-XfYQ]http://www.youtube.com/watch?v=oA-7fN-XfYQ[/video]
PSUAGRO.
Well-Known Member
You handsome devil you! Lol^^.....thanks for the meter readings tags, nice gear no doubt....
Yeah seen this bitch......IDK, i'm kinda skeptical like puff on these, seems like those budzilla panels started quite the revolution/evolution? This year
Why are they "arcing" the led modules towards each other? To boost umol readings at the center? Lol they do realize most want to utilize all of our grow area.......maybe i'm to stoned
tags420
Well-Known Member
^^^I have been emailing them today too. Wonder how much they get asked those questions.
VIPAR: We use Bridgelux, EpLED and EpiLED LED's. Can I help you with anything else?
ME: Thanks for the quick reply. Does your lens magnify the light or is it just a focus lens
VIPAR: The lens focuses the light emitted from the LED down a 80 degree angle. Are you interested in a particular model?
ME:I am looking for the best led unit or units to truly replace a 1000hps. I know a fair bit about led so I just want to know what I am getting. To be honest your guys looks like a rebranded cidly or evergrow but I saw you high par out put so I figured I would check it out
VIPAR: I appreciate your honesty. Our lights are from EverGrow, but they are not simply rebranded EverGrow lights. A lot of time and energy has gone into the testing and re-testing of our spectrum. The high par output comes down to the quality and viewing angle of the lenses, the heat management systems within our lights (Keeping the temps of the diodes lower thus increasing the PAR output of the diode) and the LEDs we use.
Your best bet at replacing your 1000W HPS with our products, would be 2 x B4X4. Here is a link if you.
ME: Thanks for the help. I will check them out more.
Nice guy and pretty honest. Still a rebranded light to me but europe is probably buying quite a few of these. Wonder if they are getting better in quality, as in not breaking/showing up broke.
The advanced light is not what I was expecting. If it was wider than the canopy it would work I guess. I have wondered about doing opposite...convex. So to maximize coverage by sacrifice a little peak.
VIPAR: We use Bridgelux, EpLED and EpiLED LED's. Can I help you with anything else?
ME: Thanks for the quick reply. Does your lens magnify the light or is it just a focus lens
VIPAR: The lens focuses the light emitted from the LED down a 80 degree angle. Are you interested in a particular model?
ME:I am looking for the best led unit or units to truly replace a 1000hps. I know a fair bit about led so I just want to know what I am getting. To be honest your guys looks like a rebranded cidly or evergrow but I saw you high par out put so I figured I would check it out
VIPAR: I appreciate your honesty. Our lights are from EverGrow, but they are not simply rebranded EverGrow lights. A lot of time and energy has gone into the testing and re-testing of our spectrum. The high par output comes down to the quality and viewing angle of the lenses, the heat management systems within our lights (Keeping the temps of the diodes lower thus increasing the PAR output of the diode) and the LEDs we use.
Your best bet at replacing your 1000W HPS with our products, would be 2 x B4X4. Here is a link if you.
ME: Thanks for the help. I will check them out more.
Nice guy and pretty honest. Still a rebranded light to me but europe is probably buying quite a few of these. Wonder if they are getting better in quality, as in not breaking/showing up broke.
The advanced light is not what I was expecting. If it was wider than the canopy it would work I guess. I have wondered about doing opposite...convex. So to maximize coverage by sacrifice a little peak.
El Tiberon
Active Member
Am I the only person who spent 500 on veg lights?
Probably so but I am El Tib and I am adjusted to being in countries where lighting is limited.
Will Hans panels work better then CFL I used for veg, perhaps. Will they be worth investment? We will see.
Some of you are completely obnoxious about this. I grow weed in countries that most wont and it is getting a little old.
Probably so but I am El Tib and I am adjusted to being in countries where lighting is limited.
Will Hans panels work better then CFL I used for veg, perhaps. Will they be worth investment? We will see.
Some of you are completely obnoxious about this. I grow weed in countries that most wont and it is getting a little old.
I'm pretty new to growing and have had limited experience, I wanted to try an led but there was so many companies out there, I was afraid to get ripped off. I was lucky enough to find this board and finally bought the new version area51 light. Jeff's accessibility and honesty convinced me to buy his product. Sorry I don't have any pic's to put up but I grew the same plant under his light and actually 2 of the same plant under a 150 watt hps light. In the end I was quite shocked, the area51 led out performed the hps. My led single plant actually produced more quality bud than the other two plants together under the hps. Plants were grown in the exact environment, each had a 2'x4' grow tent. These plants were veg'd under t5's so only flowered under the led and hps. That aurora indica from nirvana was a great looking plant under the led. Will buy a couple more of these lights from Jeff.
guod
Well-Known Member
420Barista
Well-Known Member
does it Fly?
FranJan
Well-Known Member
As many people have pointed out, (Thanks goes out to PSUAGRO., multipass, et al), Han at http://www.bonsaihero.com/ledgrow.html has introduced his latest version of his LED Growlight. Still 2 for $500 and not a bad deal at that.
"August 12, 2013. A new version of my famous "Hans-panel" is introduced, it now has 10 Osram LH-CPDP Deep Red and 2 Cree XBD White Leds, as well as 4 Cree XBD Royal Blue and 13 XBD Red leds. This new version gives over 15% more light than the previous one. The White leds cover the whole spectrum of visible light, while the large amount of Deep Red leds optimally stimulate the phytochromes. The external power supply is now easily unplugabble."
Go get em kiddies!
"August 12, 2013. A new version of my famous "Hans-panel" is introduced, it now has 10 Osram LH-CPDP Deep Red and 2 Cree XBD White Leds, as well as 4 Cree XBD Royal Blue and 13 XBD Red leds. This new version gives over 15% more light than the previous one. The White leds cover the whole spectrum of visible light, while the large amount of Deep Red leds optimally stimulate the phytochromes. The external power supply is now easily unplugabble."
Technical information
- 56 Watt Cree XBD and Osram LH-CPDP LED Power, total power consumption max 65 Watt
- 3 selectable positions; (1) Seedlings and cuttings, (2) Mothers and Early weeks of flowering, and (3) Full flowering position. Easily selectable by Switch
- 4 Cree XBD Royal Blue, 13 Cree XBD Red, 2 Cree XBD White and 10 Osram LH-CPDP DeepRed Rebel Led's
- Each Led has it's own reflector, either 106 or 123 degrees, therefore optimal control of the light pattern
- Metal Core PCB for the very best cooling
- No light losses caused by glass or plastic barriers in front of the LED's
- External waterproof power supply, no heat contribution to the LED's
- Power supply with 2 meter cable, easily unpluggable.
- Size 26 cm * 38 cm , 10" * 15". Height only 4 cm, 1.6"
- Recommended maximum grow area 50*60 cm, 20" * 24"
- EU, USA or UK power supply included
- Reflector easily demountable for cleaning
- Solid construction, simple industrial design
- Very silent, only -45 dB at 60 cm, 24"
- Full year warranty
- Discrete shipping, all around the planet
- 56 Watt Cree XBD and Osram LH-CPDP LED Power, total power consumption max 65 Watt
- 3 selectable positions; (1) Seedlings and cuttings, (2) Mothers and Early weeks of flowering, and (3) Full flowering position. Easily selectable by Switch
- 4 Cree XBD Royal Blue, 13 Cree XBD Red, 2 Cree XBD White and 10 Osram LH-CPDP DeepRed Rebel Led's
- Each Led has it's own reflector, either 106 or 123 degrees, therefore optimal control of the light pattern
- Metal Core PCB for the very best cooling
- No light losses caused by glass or plastic barriers in front of the LED's
- External waterproof power supply, no heat contribution to the LED's
- Power supply with 2 meter cable, easily unpluggable.
- Size 26 cm * 38 cm , 10" * 15". Height only 4 cm, 1.6"
- Recommended maximum grow area 50*60 cm, 20" * 24"
- EU, USA or UK power supply included
- Reflector easily demountable for cleaning
- Solid construction, simple industrial design
- Very silent, only -45 dB at 60 cm, 24"
- Full year warranty
- Discrete shipping, all around the planet
Go get em kiddies!
captainmorgan
Well-Known Member
Is there any consensus on Blackdogs quality. My local hydro store is considering carrying them.