1. Name Calling or general rude behavior is no longer acceptable in the Cafe, We are adults which means that we should be able to debate without resorting to name calling. Warnings will be given out if users fail to act appropriately.

[How To]: Butane Honey Hash Oil (Videos and Pictures)

Discussion in 'Toke N Talk' started by Benassi, Mar 4, 2011.

  1.  
    canibud

    canibud Active Member

    To smoke it I use charcoal tablets, used for burning incense, drop a bit on and use a straw. They burn hot and clean or thin with alcohol and put on the paper
  2.  
    Kodank Moment

    Kodank Moment Well-Known Member

    I use a medical grade titanium plate and a pen as a tooter and the same torch as Benassi. 1inx1in cost me $17. Charcoal never burns clean. It's cheaper then a globe setup. And its clean.
  3.  
    rosecitypapa

    rosecitypapa Active Member

    Luv the ss turkey baster as a better alternative to pvc.

    I wonder how much the potency of the oil would change if you could devise a diy way to keep the butane going back and forth from a liquid to gaseous state refluxing through the plant matter. Does the turkey baster fit through the opening of a liter of coke? If you could get a fairly good seal with the turkey baster through the mouth of a plastic coke bottle cut to make a funnel and fill that with a mix of ice and a bit of isopropyl alcohol, you'd have a ghetto refluxer.
  4.  
    Benassi

    Benassi Well-Known Member

    Essentially yes, you can do this. People I talk with have actually made extraction tubes with valves to trap the liquid butane in for maximum exposure time, however... compared to a quick run of butane the quality will be significantly less. Plus there's really no reason to keep stripping away what's already been extracted. Butane is a ridiculously strong solvent... one run and 99% of all the good shit is gone. I've done second runs of already ran buds, and maybe got 0.5 out of a half ounce...

  5.  
    Benassi

    Benassi Well-Known Member

    Bed Bath & Beyond holmes!

    It's funny how you can tell if people in your town are oil heads... the BB&B will be sold out and the cashier will make a reference such as "so many young guys are buying these basters".
  6.  
    rosecitypapa

    rosecitypapa Active Member

    Maybe it extracts a different fraction. I wonder if it would be more active in some medibles, it makes sense that it would. The first quick fraction for THC and the second more lengthy one to extract additional beneficial cannabinoids that are primarily active through digestion.
  7.  
    ENDLSCYCLE

    ENDLSCYCLE Well-Known Member

    So...are you saying I fkt up buyin this????
    [​IMG][​IMG][​IMG]
  8.  
    Benassi

    Benassi Well-Known Member

    The $100 extractor tube made from NASA materials? Didn't fuck up buying it because it's sweet, but you could of made one with a trip to bed bath & beyond and home depot
  9.  
    ENDLSCYCLE

    ENDLSCYCLE Well-Known Member

    I just like the stand....was the selling point for me....but a $10 turkey baster would of been alot cheaper!!.....If this was yours....would you use the 100micron screen that comes with it or would you still use coffee filters....and what brand coffefilters are you using on the baster....I know the brown ones are the best....just which one
  10.  
    Benassi

    Benassi Well-Known Member

    A lot of guys have made their own stands as well. Some even welded 4 of the basters together with a stand to make multi-runs that look pretty sweet. I'd try the screen out once, and if there was no plant matter or anything in my oil, I'd stick with it until it gets completely gummed up.

    I just use standard brown filters, the best was to put one layer of cheese cloth, and then one filter over it. Really clean oil came from that
  11.  
    StonedPony

    StonedPony Well-Known Member

    Hey Benassi.......never tride this before but from your instructions and video think I have a hand on it just need the equipment.......Im lazy....so went looking around....I can get this for 50 bux shipping included would this work?

    [​IMG]


    EDIT: says hold 44grams of material at a time.
  12.  
    Benassi

    Benassi Well-Known Member

    Hahahaha you posted exactly the same picture as the guy above me; ENDCYCLE

    I hear those extractor tubes are great so I don't see why not order it if you're too lazy to make one :D

    You gonna try and vacuum purge like my tek or go with the original double boil or heat plate purge?
  13.  
    StonedPony

    StonedPony Well-Known Member

    Im going to give the vacumm a try.....HI have a vacumm pump already in my shop for my bikes.............so save there.....oh and his picture not showing up for me so didnt see it LOL....fuck stoned on my ass so I probley just bliped past it........I was googling differat sites and I Like the looks of this tube.......think Ill go ahead and order then..........thanks............will keep you posted how it goes.......my BHO journal......lol
  14.  
    StonedPony

    StonedPony Well-Known Member

    Im going to use my good bud...Purple haze on firs run then Im going to do a run on my vaped bud and do a comparison test and just see how much is left in the vaped.........I know i can compust vaped weed in my steam roller and get high again....about 2 full bowls versus a 1/4 bowl of good bud in the steam roller.


    EDIT: speaking for myself that is........everyone gets higher or not as high on differant amounts.....Id say Im avg with everyon on how high I get on amont of bud it takes.
  15.  
    Benassi

    Benassi Well-Known Member

    Hahaha right on!

    I'd recommend doing the vape bud first, just to get the gist of things when it comes to what to do and how long to do it. Rather accidentally ruin shit bud than ruining bomb nugs, ya know?
  16.  
    ENDLSCYCLE

    ENDLSCYCLE Well-Known Member

    Too funny.....Let's see who get's their BHO tube first....and who uses theirs first.....got 6 cans of vectra on the way......
    how many cans do you think I would need if i filled this tube up tight but loose(you know what I mean)....says it holds 44grams...that's probably if packed tighter than fk.
  17.  
    Benassi

    Benassi Well-Known Member

    Me personally, will try to do 1 can per 1 ounce, but usually go over. Like I said previously it takes about ~30 seconds to kill half a can (320ml)

    Less tane, more pure oil. By more pure, I mean CLEAR honey, and completely stable.

    For instance, some goodies from the guys at TC
    [​IMG]


    They make AMAZING shit!
  18.  
    akgrown

    akgrown Well-Known Member

    So you inspired med today to make BHO. Ususally I make ISO and its only ok. I made it from 10g of good chron bottom nugs. Ran 2 cans of vector and ended up with just about 1.5 grams. It was a lot harder than I thought it would be. I was expecting a really gooey oil, instead it is more like a really sticky earwax or taffy. Its really good, was pretty easy.
  19.  
    Benassi

    Benassi Well-Known Member

    Good shit man! Should post a pic.

    1.5g return is really good man, grams of oil last as long as eighths for me. With weed it lasts even longer.
  20.  
    akgrown

    akgrown Well-Known Member

    Last Night I was already really stoned when I made it so I could not tell you how good it is. I notice the cold outside makes it impossible to get it out of the jar, I have to warm it with my hands every time. It melts into a nearly clear/green tinted liquid. So I smoked a glob about half the size of my pinky nail. Very clear intense high, peak only lasted about 15-20 mins(high tolerance) still riding it. Going to top a bowl with a nice glob and will report back. .

Share This Page