[How To]: Butane Honey Hash Oil (Videos and Pictures)

canibud

Active Member
To smoke it I use charcoal tablets, used for burning incense, drop a bit on and use a straw. They burn hot and clean or thin with alcohol and put on the paper
 

Kodank Moment

Well-Known Member
I use a medical grade titanium plate and a pen as a tooter and the same torch as Benassi. 1inx1in cost me $17. Charcoal never burns clean. It's cheaper then a globe setup. And its clean.
 

rosecitypapa

Active Member
Luv the ss turkey baster as a better alternative to pvc.

I wonder how much the potency of the oil would change if you could devise a diy way to keep the butane going back and forth from a liquid to gaseous state refluxing through the plant matter. Does the turkey baster fit through the opening of a liter of coke? If you could get a fairly good seal with the turkey baster through the mouth of a plastic coke bottle cut to make a funnel and fill that with a mix of ice and a bit of isopropyl alcohol, you'd have a ghetto refluxer.
 

Benassi

Well-Known Member
Luv the ss turkey baster as a better alternative to pvc.

I wonder how much the potency of the oil would change if you could devise a diy way to keep the butane going back and forth from a liquid to gaseous state refluxing through the plant matter. Does the turkey baster fit through the opening of a liter of coke? If you could get a fairly good seal with the turkey baster through the mouth of a plastic coke bottle cut to make a funnel and fill that with a mix of ice and a bit of isopropyl alcohol, you'd have a ghetto refluxer.
Essentially yes, you can do this. People I talk with have actually made extraction tubes with valves to trap the liquid butane in for maximum exposure time, however... compared to a quick run of butane the quality will be significantly less. Plus there's really no reason to keep stripping away what's already been extracted. Butane is a ridiculously strong solvent... one run and 99% of all the good shit is gone. I've done second runs of already ran buds, and maybe got 0.5 out of a half ounce...

Some people like to build a contained extraction tube with valves to hold the butane in and let it sit in the plant material for a long time to maximize extraction but this is unnecessary. An open ended tube where the butane can flow through and drip into a collection dish is the easiest to build and makes much better oil. Allowing the butane to sit in the plant material will make your oil greener.
 

Benassi

Well-Known Member
Woah sweet vid, whered you get the tube?
Bed Bath & Beyond holmes!

It's funny how you can tell if people in your town are oil heads... the BB&B will be sold out and the cashier will make a reference such as "so many young guys are buying these basters".
 

rosecitypapa

Active Member
Essentially yes, you can do this. People I talk with have actually made extraction tubes with valves to trap the liquid butane in for maximum exposure time, however... compared to a quick run of butane the quality will be significantly less. Plus there's really no reason to keep stripping away what's already been extracted. Butane is a ridiculously strong solvent... one run and 99% of all the good shit is gone. I've done second runs of already ran buds, and maybe got 0.5 out of a half ounce...
Maybe it extracts a different fraction. I wonder if it would be more active in some medibles, it makes sense that it would. The first quick fraction for THC and the second more lengthy one to extract additional beneficial cannabinoids that are primarily active through digestion.
 

ENDLSCYCLE

Well-Known Member
I just like the stand....was the selling point for me....but a $10 turkey baster would of been alot cheaper!!.....If this was yours....would you use the 100micron screen that comes with it or would you still use coffee filters....and what brand coffefilters are you using on the baster....I know the brown ones are the best....just which one
 

Benassi

Well-Known Member
I just like the stand....was the selling point for me....but a $10 turkey baster would of been alot cheaper!!.....If this was yours....would you use the 100micron screen that comes with it or would you still use coffee filters....and what brand coffefilters are you using on the baster....I know the brown ones are the best....just which one
A lot of guys have made their own stands as well. Some even welded 4 of the basters together with a stand to make multi-runs that look pretty sweet. I'd try the screen out once, and if there was no plant matter or anything in my oil, I'd stick with it until it gets completely gummed up.

I just use standard brown filters, the best was to put one layer of cheese cloth, and then one filter over it. Really clean oil came from that
 

StonedPony

Well-Known Member
Hey Benassi.......never tride this before but from your instructions and video think I have a hand on it just need the equipment.......Im lazy....so went looking around....I can get this for 50 bux shipping included would this work?




EDIT: says hold 44grams of material at a time.
 

Benassi

Well-Known Member
Hahahaha you posted exactly the same picture as the guy above me; ENDCYCLE

I hear those extractor tubes are great so I don't see why not order it if you're too lazy to make one :D

You gonna try and vacuum purge like my tek or go with the original double boil or heat plate purge?
 

StonedPony

Well-Known Member
Hahahaha you posted exactly the same picture as the guy above me; ENDCYCLE

I hear those extractor tubes are great so I don't see why not order it if you're too lazy to make one :D

You gonna try and vacuum purge like my tek or go with the original double boil or heat plate purge?
Im going to give the vacumm a try.....HI have a vacumm pump already in my shop for my bikes.............so save there.....oh and his picture not showing up for me so didnt see it LOL....fuck stoned on my ass so I probley just bliped past it........I was googling differat sites and I Like the looks of this tube.......think Ill go ahead and order then..........thanks............will keep you posted how it goes.......my BHO journal......lol
 

StonedPony

Well-Known Member
Im going to use my good bud...Purple haze on firs run then Im going to do a run on my vaped bud and do a comparison test and just see how much is left in the vaped.........I know i can compust vaped weed in my steam roller and get high again....about 2 full bowls versus a 1/4 bowl of good bud in the steam roller.


EDIT: speaking for myself that is........everyone gets higher or not as high on differant amounts.....Id say Im avg with everyon on how high I get on amont of bud it takes.
 

Benassi

Well-Known Member
LOL trust me I will be yelling hahah......Im pretty pumped up about doing this.......cant wait.
Hahaha right on!

Im going to use my good bud...Purple haze on firs run then Im going to do a run on my vaped bud and do a comparison test and just see how much is left in the vaped.........I know i can compust vaped weed in my steam roller and get high again....about 2 full bowls versus a 1/4 bowl of good bud in the steam roller.


EDIT: speaking for myself that is........everyone gets higher or not as high on differant amounts.....Id say Im avg with everyon on how high I get on amont of bud it takes.
I'd recommend doing the vape bud first, just to get the gist of things when it comes to what to do and how long to do it. Rather accidentally ruin shit bud than ruining bomb nugs, ya know?
 

ENDLSCYCLE

Well-Known Member
Too funny.....Let's see who get's their BHO tube first....and who uses theirs first.....got 6 cans of vectra on the way......
how many cans do you think I would need if i filled this tube up tight but loose(you know what I mean)....says it holds 44grams...that's probably if packed tighter than fk.
 

Benassi

Well-Known Member
Me personally, will try to do 1 can per 1 ounce, but usually go over. Like I said previously it takes about ~30 seconds to kill half a can (320ml)

Less tane, more pure oil. By more pure, I mean CLEAR honey, and completely stable.

For instance, some goodies from the guys at TC



They make AMAZING shit!
 

akgrown

Well-Known Member
So you inspired med today to make BHO. Ususally I make ISO and its only ok. I made it from 10g of good chron bottom nugs. Ran 2 cans of vector and ended up with just about 1.5 grams. It was a lot harder than I thought it would be. I was expecting a really gooey oil, instead it is more like a really sticky earwax or taffy. Its really good, was pretty easy.
 

Benassi

Well-Known Member
So you inspired med today to make BHO. Ususally I make ISO and its only ok. I made it from 10g of good chron bottom nugs. Ran 2 cans of vector and ended up with just about 1.5 grams. It was a lot harder than I thought it would be. I was expecting a really gooey oil, instead it is more like a really sticky earwax or taffy. Its really good, was pretty easy.
Good shit man! Should post a pic.

1.5g return is really good man, grams of oil last as long as eighths for me. With weed it lasts even longer.
 

akgrown

Well-Known Member
Last Night I was already really stoned when I made it so I could not tell you how good it is. I notice the cold outside makes it impossible to get it out of the jar, I have to warm it with my hands every time. It melts into a nearly clear/green tinted liquid. So I smoked a glob about half the size of my pinky nail. Very clear intense high, peak only lasted about 15-20 mins(high tolerance) still riding it. Going to top a bowl with a nice glob and will report back. .
 
Top