Homemade smoking devices

mc. eddy I added the one you sent me the popper bottle. Thank you.

you are welcome it works pretty well it should be nice but after once or twice needs to be thrown out

i gotta say the popper looks pretty ametuer. i dont really get the popping. not to be a jerk. also i feel i should mention the still living legend of porta bong, once a great friend to me. porta bong could consolidate into the size of a roll of change. i made it outta this little tube i found at the dentists office that had little plastic caps on each end, it was about the size of a roll of change like i sad, and i used a real small socket wrench piece for the bowl and a pen tube, and i could put the pen tube and bowl inside the other bigger tube and put it it my pocket, and then wip it out and assemble it and pack the fucker up, gave crazy good hits. had some good summers with that buddy back in the day. he lives at my friends house now who i sold it to.

1.remove core of apple and insert ganga. Use lighter.
2. use a empty cardboard roll from toilete paper. cut small hole on top. Place tin foil with small holes in it over the hole. This make a steam roller. not recomended because of aluminum.
3. clean out the tobacco in a cig. and pack with ground weed. then remove filter after packed tight.
4. from what I understand you can heat knives on stove and place bud in between and use tube to tunnel inhale smoke.
I prefer my bong.

Hey i just noticed this lil thread here and that got me going

i made this piece from some left over wood in my grow, took me about 30min with a and saw, power drill and a delta sander so it ain't to bad if you high on some sativa

i gone work this baby now

this is the easiest homade peice all you need is tinfoil and a pen, or anything that is shaped like a pen.
1, rip off a peice of foil that is about 4 inches wide
2 fold in half
3 fold one edge over
4 place finger where you folded over and pen to the tip of your finger
5 roll the foil arould the pen and your finger
6 squeze foil tight around the pen and your finger
7 pull out pen and finger bend, and enjoy,

now youll never be without something to smoke,

what do you think of that mogie, growfaqworthy??

the last two pics are on the next post

and thats how its done

The way mc. eddy. presented the popper material was exactly what I needed. There were instructions and pics. I could copy them and put them into FAQ's.

Now if there was a way to stagger those attached thumbnails so they appear like pic one under another that would be awesome. But I am clueless.

yeah does anyone have pictures or diagrams or shit like that for a watermellon

mc.eddy.supreme said:

[SIZE=-1]Popper Bottle:[/SIZE]

[SIZE=-2]Need a quick, easy way to toke? Make a Popper Bottle![/SIZE]​

[SIZE=-2]Quick and easy![/SIZE]

• [SIZE=-2]One small plastic soda bottle of any size.[/SIZE]
• [SIZE=-2]A metal threaded hollow pipe (commonly found in hand pipes or lamps) the pipe should be around 3 or 4 inches long and about 1cm in diameter.[/SIZE]
• [SIZE=-2]A cigarette or lighter to melt the hole.[/SIZE]

• [SIZE=-2]Take all the labels off the bottle.[/SIZE]
• [SIZE=-2]Use a lighter to heat the plastic to bend the bottle into a shape that will not allow water to get sucked up into the mouth piece when you hit it.[/SIZE]
• [SIZE=-2]Using a cigarette or lighter, burn a small hole (slightly smaller than the diameter of the pipe) near the bottom of the bottle. Make the hole at an angle.[/SIZE]
• [SIZE=-2]Take the metal tube and screw it tightly in the hole.[/SIZE]
• [SIZE=-2]Fill the bottle with enough water to cover the bottom of the tube as you would a .[/SIZE]
• [SIZE=-2]Now comes the trick: Packing the Popper (tube)...to pack a popper you take a small amount of weed just enough to fit in the tube snugly but not too much or it won't pop. You take the weed and roll it into a ball. You take the ball and set it in the tube (make sure theres enough so it wont fall through) then you light it up and hit it just like a , Cook the weed all the way through so it's ash and when you see it start to fall hit it as hard as you can so it "pops" through the tube (hence the name "Popper") and you get a mad hit fast in your lungs.[/SIZE]
  
  
  
  
  
  
  
  
  [SIZE=-2](Making the hole) ^[/SIZE]
  
  
  
  [SIZE=-2](The packed tube) ^[/SIZE]
  [SIZE=-2]*Remember, you're dealing with plastic here. So be careful not to let any melted plastic drip on you! Plastic vapors are NOT good for your health![/SIZE]
  [SIZE=-2]*When it gets too dirty to clean easily-just toss it![/SIZE]

This one is pretty good to it works pretty well one or two times then it is good to throw out. also if u are looking for more do it yourselfs go to Pothumor.com-Funny marijuana pics, pictures, cartoons, animations, sounds, games, downloads, and more! and go to machighvers how 2's and there are a ton of good instructions and do ityourselfs.

Click to expand...

That pretty much what I make. Another way to do it is if you have some zebra pens (or other pens with a metallic shell) just gut the pen, burn a while in the bottoms of the bottle so the pen fits in at an angle, burn a carb and... tada... you have a non mangled bottle bong (1-3 hitter)

yeah that works as well but i think the best one is an pipe it is easy to make, cheap, and it makes the weed have a slight taste because some of the juices soak into it. try it

Anyone ever heard of a Gravity Bomb?!??!

Ill post pictures tomorow, night time right now. But easy to follow

Empty Gallon of milk
Tinfoil
Knife, or something to cut with
Cooler

1.) get all your supplies ready.
2.) cut the bottom off of the gallon of milk, as close to the bottom as you can. Take the cap off, you wont need it.
3.) make a small bowl at the top of the gallon of milk where the cap used to be, tilfoil is the easiest to do this with, just get a small peice put it over it, and poke a couple small holes it it. Make sure you dont poke them everywhere on the top, just in the middle where the bud will be. You dont have to use tinfoil however, just easiest way for now
4.) Fill the cooler up with water.
5.) Submerge the gallon of milk all the way in the cooler, so only the top 3 inches or so are out of the water. you dont want to get ur bowl wet.
6.) put the smoking substance in the bowl at the top that u made
7.) Light the bowl as you slowly pull up on the gallon of milk.
8.) As the gallon of milk rises, its goin to suck the air threw the bowl you just made, and hopefully u have weed on it, therefore filling the whole gallon up with smoke.
9.) after you pull up as much as you can, without letting the bottom of the gallon come out of water ( if the bottom comes above water, smoke will escape). Take the tinfoil cap off, and quickly put your mouth over it
10.) push down on the gallon of milk, make sure your mouth stays on the cap, and suck in while it goes down. Dont push down to fast either, might be dangerous. The faster you push down the faster you suck in, if you push down really slow, then suck in really slow. Also we made alot of cool tricks to this, if you keep your mouth closed and push down, the preasure will build up inside the gallon. Then when it gets hard to push down anymore, open your mouth.
11.) whole gallon of smoke rushes into your body. You should feel pretty good by now

Sidenotes on this. You can use any type of bottle... 2liter.. whatever. The bigger the bottle the more smoke you going to have, but trust me a gallon is a lot. The one that we all use around here is 2.5 gallons. This is to big to finish in 1 hit, so after you take the first huge hit, blow it back into the gravity, it should push up so keep your mouth over it,, then push back down. Do this about 6 times, and when you get up you will feel pretty good. Ill post pictures tomorow.

Goodluck

yeah i have heard of that, it is okay but it is hard to get a hole in it that is the right size, just stick with an pipe dude

The Bunt

That is what I use most of the time

The first one looked like a cigar so we called the one hitter bunt

View attachment 7610

This one is small and my favorite it holds about 1/4 - 1/2 joint if I pack it tight but was built and used as a one hitter and it does a fine job

I start by drilling a 1/8 inch hole alll the way through or any size close to reg coat hanger used as cleaning rod.

Then I drill a 1/4 inch hole to the depth of bowl I want then I cone shape the entrance to the bowl it makes it easier to load and pack

View attachment 7611

on the tar chamber the other end I drill another 1/4 inch hole being careful not to drill all the way through. The bunt needs the 1/8 hole between the bowl and tar chamber

I make a screen using a phillip screw driver and a regular 1/2 inch pipe screen by bending the screen over the end of the screw driver. I use a belt sander to grind the end off the screw driver to make the end flat this makes a much better screen but you can still make the screen with a phillip screw driver

View attachment 7613

then I push the screen in backwards into the tar chamber

View attachment 7612

To insert screen, extract screen or clean the pipe I use a regular coat hanger. To keep from losing the coat hanger I tie it to one of those memory stick necklace's so it's always in the same place around my neck.

View attachment 7614

The perfect little pipe that keeps a low profile. Nobody ask whats that until they smoke out of it. Then it's where can I get one. The tar chamber catches most of the tar and lets the full flavor through. When I need to go some where I put it in a small tool box and it fits right in. Its a size and shape the blends into almost anything

I make these out of exotic wood. The one here is made from katalox. Up until now I think I'm the only one making them like this. I have made hundreds and if this catches on all I ask is please call them The Bunt.

Thank You

I don't know what happened to the pictues I used this forum to upload them

I'll get it fixed

yeah try to get it fixed i would like to see what they look like and if they are cool

I hope this works

yeah they worked, they look okay but not amazing, but a good do ityourself pipe. but like i have said, pipes or other pipes made out of fruit is the way to go

The forum sliped I think in other words I don't know what happened

If any one I'll retype it

The pictures came through the second time