Homemade smoking devices

Collie Man

Active Member
this is by far the best bong fake i have ever made. u need some tinfoil, 2liet plastic bottle, a bread bag (or a long skinny bag), and some tape. cut off the bottom of the 2 liter bottle and put the bag over it and tape it down so it is airtight. next shape a bowlpack that can attach to the mouthpiece of the bottle. make sure the bag is completely sucked up into the bottle and light the buds and slowly bring down the bag and it will fill with smoke. that shit will kick ur ass if u do it right. the bowlpack has to be able to remove from the 2liter so as u suck the smoke from there
 
heres a 3 chamber Mega bong me and an old roommate made one day why we we're high and bored. We dubbed it The Pot Smoker 5000

Tools:

Drill
1/2 in. drill bit
Box cutter/ scissors

Hardware Store:

1/2 in. clear tubing - 2- 3ft
Electrical tape
Clear drying silicone/ aqua class works from the pet store
2 1/2 in. copper tapered pipe fittings(you can use the plastic ones if you one)

Arts and craft store:

1 Architect blueprint tube
2 plastic Paint jars(empty!)

Gas station:
1 liter(i think) bottle of Gatorade(any flavor)

Misc.:
1 plastic cup or someting round that fits the inner diameter of the Architect tube

Ight take a look at the pics below. Its pretty self explanatory. I dont have the bong anymore and i dont have pics of it so i just made a 3d pic of it so you can see how it all goes together. One thing i didnt add is where to put the silicone, just put it around all the holes and fittings where everything connects.

Total cost was around $60, but most likely less due to the fact we bought extra parts and we didnt use them.

the bong comes to be about 3.5-4 ft tall. if you decide to try and build this i suggest only packing half or 1/4 bowls. Its a 2 hit process, and i dont care if you think you're Michael Phelps your not gonna clear it in one hit. also its a 2 person deal, one lights the other person hits. good luck its a good party bong.
 

Attachments

ok, i have a help request. i need to find a water pump that pumps 1-5 G.P.M. (60-300 G.P.H.), will be able to transport at least 1 foot up in elevation, and has an inlet & outlet tube (so no submersible pumps). i need something kinda cheap though... i'll even cannabalise (hehe) something to get such a pump. i know this is a specific request and odd for a stoner, but it will be the final piece for an electronically repeating dual chambered gravity bong with forced inhalation. sound complicated, long, and interesting? help me out please :bigjoint:. a push in the right direction may be all i need! THANKS!

P.s. the canadian lung thing... if you drill a hole in the top of a 2 litter's cap big enough to screw in a metal bowl (or drop in a glass slider), all you need to do to take your hit is remove the cap. if you'd like, cut off the bottom half of the caps threads for a quicker un-screw
 

super2200

Well-Known Member
ok, i have a help request. i need to find a water pump that pumps 1-5 G.P.M. (60-300 G.P.H.), will be able to transport at least 1 foot up in elevation, and has an inlet & outlet tube (so no submersible pumps). i need something kinda cheap though... i'll even cannabalise (hehe) something to get such a pump. i know this is a specific request and odd for a stoner, but it will be the final piece for an electronically repeating dual chambered gravity bong with forced inhalation. sound complicated, long, and interesting? help me out please :bigjoint:. a push in the right direction may be all i need! THANKS!
http://www.dchydro.com/product/27/ActiveAqua-Pump-400-GPH/

there is a 400gph there are plenty more
 

laserbrn

Well-Known Member
You are going to have a problem finding this pump very cheap. I have already been down this road and inline fluid pumps are EXPENSIVE. Generally with inline pumps as long as you are pumping say fuel the fuel contains the chemicals necessary to lube the pumps. Water is very damaging to inline pumps and therefore need to be sealed up and it just makes for expensive pumps. Generally going to be over $75.00 even for a very small one.
 
Thats kind of what i figured (price). i've looked high and low for a cheap inline pump, but the closest i found was from edmund scientific (http://scientificsonline.com/product.asp_Q_pn_E_3060307)and it was about $50... and it still didn't have the pumping cappacity i wanted (and although it says submersible it looks like exactly what i want):wall:. i had a revelation last night at work though... i guess i could use a submersible pump if i can get one that will work without the need to be fully submereged (meaning something that doesn't need fluid and preferably something that will intake from the lowest point possible). at this point i'm so frustrated with my search i'm considering using a small impellar from something i can find at say a resale shop (smaller vacuum or even a dustbuster kinda thing) and just making my own housing with a watertight bearing (something like a propellar shaft bearing from a smaller R/C boat). all i'd have to do is find the right motor (torgue, rpm, and shaft diameter & "outside the housing" length). hopefully the vacuum that i choose has a motor that meets at least most of these criteria. i've done this before(i was 10 lol) in a much cruder fashion... it shot water about 7 or 8 feet high though (like 20 GPM). it was from a vacuum cleaner motor & impellar with a bousing made from a funnel and lots of hot glue (i also used hot glue to seal up the top of the motor housing and sealed the obviously non watertight bearing with vaseline globbed in there). i grew up watching way too much junkyard wars :mrgreen:

Ps. i'm not so sure since i'm new here, is this something that i should be doing through PM's? sorry if it is, every forum's different
 
screw all this nonsense... i think i may have found what i need (of course just after i posted that long ramble)... for $28 plus S&H.
Manufacturers page: http://www.lifegardaquatics.com/products/product.php?id=10
Cheapest in-stock seller: http://www.bestnest.com/bestnest/RTProduct.asp?SKU=PEN-R440102&src=froogle&kw=PEN-R440102
I cant beleive i missed this. i am ashamed (and slightly disapointed... i may make the homebrew pump anyway while i wait for shipping). hopefully this is something that interests you as well laserbrn
 

laserbrn

Well-Known Member
screw all this nonsense... i think i may have found what i need (of course just after i posted that long ramble)... for $28 plus S&H.
Manufacturers page: http://www.lifegardaquatics.com/products/product.php?id=10
Cheapest in-stock seller: http://www.bestnest.com/bestnest/RTProduct.asp?SKU=PEN-R440102&src=froogle&kw=PEN-R440102
I cant beleive i missed this. i am ashamed (and slightly disapointed... i may make the homebrew pump anyway while i wait for shipping). hopefully this is something that interests you as well laserbrn
Too small for what I was looking to do, but I'm glad that it worked out for you. Nice find.
 

UNKL L

Active Member
make a lung
2 liter coke bottle
subway bag
aluminum foil
tape
and some smoke
cut bottom of coke bottle. tape bag around bottle air tight. make a bowl in top of bottle with foil and poke some small holes. push bag into bottle insert weed in bowl and light takes two ppl have other person pull bag out slow till it is full of smoke. remove bowl and good luck clearing it out
 

rampagen08

Active Member
Photo445.jpgPhoto446.jpgPhoto442.jpgPhoto440.jpgPhoto444.jpgPhoto443.jpg

my home made bong with ash catcher.
nick named the whale from previously being a steam roller that when the bowl was done it looked like a whale because i would blow the ashes out and it came from the top like a blow hole
anyways
i just made it
haha it hits good
 

bobbydee

Member
i dont have a pic cuz it was prolly 3 years ago but i used one of those mini to go listerine spray bottles as my bong and a little rabbit ear antenna of an old tv i found at a garage sale (if u dont have one u can use a hollowed out metal pen) with a metal nut attached to it for my slide. it worked really good, was small enough to hide just about anywhere, and every hit was minty.
 
I didn't have alot of the stuff you guys were talking about, so i got crafty.
You will need:
2 plastic bottles, 1 with cap, 1 without cap
1 piece of chewing gum
1 pen body
1 piece of aluminum foil
1 roll of tape, any kind pretty much works

1) burn a hole into the bottle you would like to inhale from(bottle A), making sure that when you stick the pen through and fill it halfway with water it bubbles.
2) burn a hole into the second bottle that you will light (bottle B) then fill halfway with water
3) secure both sides of the pen body so that they are air tight and no smoke escapes through gaps. i used tape on one side and gum on the other...only had one piece of gum haha
4) cut a hole into the top of bottle B. this is where your aluminum foil comes in, insert aluminum foil into hole and secure with tape.
enjoy
 

Attachments

You simply can't beat this smoking device. its simple, its easy, its reliable, and it uses common science to make smoking alot better.

[video=youtube;0hjsOTt4pyg]http://www.youtube.com/watch?v=0hjsOTt4pyg[/video]
 

Nocturnal1

Active Member
tehehe, I thought that vid was the first vid. i was like wtf, just buy a piece. But I see what this thread is aboot
 
Attention all bong and pipe making enthusiasts! I am currently accepting submissions for a new DIY bong/pipe book to be published by Cider Mill Press and distributed worldwide. If you want to show off your skills, please send a high-res well lit photo of your creation (not being used), a brief description of how you made it (materials used and the process), and how you would like to be credited (real name or alias is fine). All chosen will be required to sign a release for use of their submission. Please send all submissions to: [email protected]
Thanks,
Dr. Seymour Kindbud
Amazon Preview Link: http://www.amazon.com/Bong-Bible-Ultimate-Guide-Getting/dp/images/1604332344
 

smokey386

Member
take a bic pen. pull out the tip and ink. break off the other end. take a small ratchet that fits tightly over the broken end of the pen. tape the pen and ratchet together with electrical or duct tape. take a 2 liter or any liquor bottle. peel off the label.burn a hole that the bic pen slides through snugly near the bottom. screw off the cap of the bottle. put some water in it about halfway to the hole near the bottom. put the bic pen in the hole and put whatever you are smoking in the ratchet. out your mouth where the open hole is on the top where the cap goes and light whatever you are smoking. from there smoke it light a bong. you now have a homemade bong
 

layne

Member
start with a 2 liter bottle
cut off the bottom put a plastic bag around the bottom and shove it inside the bottle and tape the edge around the bottle so it is airtight
put a socket in the lid
put ur weed in the socket
reach into the bottle from the bottom and while lighting ur weed slowly pull the bag out
 
Top