What is the best way for a cooltube to be setup in a small cupboard grow?

whitewidow2

Well-Known Member
Should it be...

fan pulling air out the growroom>ducting>cooltube>ducting>carbon filter

Is it better to pull the air through the cooltube in this manner or to push it through and carbon filter it at the other side?
 
I have mine setup like this



<-------FAN-------REFLECTOR----REFLECTOR----------CARBON FILTER-------


I prefer to suck because it doesn't add presure to my vent hose. If it did it would kind of twist the reflectors. Now when I have it on the mover I have to suck or the pressure in the vent will push it all over.


Couple pics to help yoiu better understand.









763070d1269890512-nels-5-strain-1200-watt-dsc00789.jpg
 
Yep, pulling the air is the way to go. Put the filter on one end, the fan on the other, your ducting/reflectors inbetween, and you'll be good to go.
 
Ok thanks guys... ive heard that keeping everything as straight as possible is best as well for it to work properly... the problem is that that becomes extremely difficult in a small area... will probably be much easier when i buy a big tent -

im planning on 4 x 600w in cooltubes in a tent roughly 240cm x 240cm x 200m

i was planning on 2 lines of ducting with 2 x 600watters on each

just out of interest - i have 2 x 5" rvk fans at the moment that move 350m3/hr - would that be enough to cool each line?
 
Does anyone know if this would work or if i would need a bigger fan to pull through 2 x 600w lights each?

Im only asking as im trying to make use of what equipment i already have
 
I just did the math, and your room is about 11 m3, and those fans move about 12 m3/minute each, so they will be plenty to exchange the air every minute, which is the rule of thumb. Plus, taking into consideration the losses from pulling air through the filters, the reflectors, reducers, and ducting, it should work out about perfect. :cool:
 
thanks for the responses guys

i got my cooltube setup today

hopefully it will help the temps a bit over the summer months
 
400cfm = 680m3/hr

and if you run on half speed = 340m3/hr which is nearly identical to my fans output

how many lights do you cool with the one fan and what wattages are they?
 
400cfm = 680m3/hr

and if you run on half speed = 340m3/hr which is nearly identical to my fans output

how many lights do you cool with the one fan and what wattages are they?


Right now just 2 600 HPS through a carbon filter. Here is some pics from when I built the room and some recent ones. The inside of the tent measures 8ft X 6.5ft with a 7 ft ceiling.


attachment.php


attachment.php


attachment.php


attachment.php





Here is my passive intake on the floor.


attachment.php


And a few recent ones :blsmoke:



attachment.php


attachment.php


attachment.php
 

Attachments

  • DSC00671.jpg
    DSC00671.jpg
    50.6 KB · Views: 82
  • DSC00670.jpg
    DSC00670.jpg
    50.4 KB · Views: 76
  • DSC00669.jpg
    DSC00669.jpg
    57.3 KB · Views: 80
  • DSC00690.jpg
    DSC00690.jpg
    47.6 KB · Views: 79
  • DSC00688.jpg
    DSC00688.jpg
    40.1 KB · Views: 77
  • DSC00788.jpg
    DSC00788.jpg
    73.4 KB · Views: 81
  • DSC00837.jpg
    DSC00837.jpg
    102 KB · Views: 82
  • DSC00838.jpg
    DSC00838.jpg
    97.8 KB · Views: 77
loving the pics...

bud porn - those girls look mighty happy under there

well that is good to know about the ventilation

and are your temps ok?
 
Just checked on the girls this morning and the temp is a constant 24C thanks to my sms com twin fan controller and the cooltube

humidity is a bit high at 60%

is there any way to get this down in a cupboard grow without a dehumidifier?

i have 2 x 300w red spectrum cfls but they do put out a lot of heat so im debating whether to add them or not
 
update:

the temps are creeping up to about 80F after about 8 hours of hid lighting, im guessing this is normal as the day goes on?
 
Back
Top