Vero18 and Vero29 Test Grow

JimmyIndica said:

The coverage measurements are 18in x 24in for the 120watt

Click to expand...

PurpleBuz said:

i'm using around 300-400 watts total in a 4x2, you might be ok with 6 vero18s or three of those units you have.

Click to expand...

Exactly, that's what I've learned.

PurpleBuz said:

lol while your waiting for the a51s have you considered taking the lens off for a wider spread?

Click to expand...

I finally got around to trying that, and it made a huge improvement -- so thanks for that. Like I mentioned earlier, its a scrog so penetration is not as important, but reaching the whole canopy is. I lowered the light a bit as well, so with those improvements the wait for more suitable lighting is not as critical as it was. By the way, the replacement lighting is no longer the W90's, I cancelled the pre-order and the refund is paying for a 6 Cree 3070 series build. That will reach all the whole room nicely.

Humanrob said:

I finally got around to trying that, and it made a huge improvement -- so thanks for that. Like I mentioned earlier, its a scrog so penetration is not as important, but reaching the whole canopy is. I lowered the light a bit as well, so with those improvements the wait for more suitable lighting is not as critical as it was. By the way, the replacement lighting is no longer the W90's, I cancelled the pre-order and the refund is paying for a 6 Cree 3070 series build. That will reach all the whole room nicely.

Click to expand...

cool beans

Day44 Vero Buds!

From the way its looking? 120watt White Alien will out yield the 200watt White Alien this run do to slight pheno variation. Not much,but a little.
Very strong stable genetics from the DNA White Alien
I am looking forward to seeing the yield # from 120watt this run.

@Humanrob - without the lenses and raised a bit will give you better coverage. LED light intensity is much greater than we can perceive.

Both of your grows are looking sweet!

Mohican said:

@Humanrob - without the lenses and raised a bit will give you better coverage. LED light intensity is much greater than we can perceive.

Both of your grows are looking sweet!

Click to expand...

Interesting, thanks for that, I'll take a look at it soon.

Couple days then ripen

Hey bro.

Can I see some close ups of the colas of the zelion grow and vero grow?

How do you think they're comparatively?

Can I see some close ups of the colas of the zelion grow and vero grow?

How do you think they're comparatively?[/QUOTE]
@BM9AGS
Osram ZelionHL 3 x 2 (125watts) LED Indoor Horticulture Fixture over Moxie Seeds LemonOg 47days flower.
Comparing the Vero29s and SSL80s?
I love them both
CXB3590s will be added shortly.

JimmyIndica said:

View attachment 3496629

Can I see some close ups of the colas of the zelion grow and vero grow?

How do you think they're comparatively?
@BM9AGS
Osram ZelionHL 3 x 2 (125watts) LED Indoor Horticulture Fixture over Moxie Seeds LemonOg 47days flower.
Comparing the Vero29s and SSL80s?
I love them both
CXB3590s will be added shortly.
View attachment 3496627

Click to expand...

Damn thats a leafy bitch

Emerald Triangle Cotton Candy Cane(SweetTooth x BlueberryHeadband) will be flowered with the 125watt Osram in 10days.

DNA genetics White Walker#1 and White Walker #2

Blimburn Grizzly Purple Kush

@JimmyIndica

Hey man, I read your comments a few pages back and am totally bummed right now for the shitty experience you encountered on my behalf... however I can tell you what went wrong with the module. The misaligned hole wasn't level-flush with the rest of the surrounding surface, as you pointed out, tied together with the fact that the pre-applied TIM was super slim, creating just enough surface separation between the TIM and COB that it, slowly over time, overheated. @SupraSPL 's past work concerning heat sinks is spot on, just like everything else he so kindly provides us with, and so it's not that the heat sink+fan combo wasn't enough, as they are rated for ~100W but that I simply fucked up. It was soon after I sent you your fixture that I scrapped the idea of using pre-stock paste, as using aftermarket TIM, such as MX2, makes it x100 easier to file down drilled/tapped holes and allows for super-fluid applications between TIM and COB, thus ensuring the ideal bond that is necessary to keep COBs running cool and effective.

It's only right that I make it right on my end, as you have held up your side of the bargain all of this time and have always kept me in high esteem, even venturing to take a chance with my creativity in it's earliest, most imperfect stages; let me prove my commitment and dedication to you by upgrading whatever you have left, I'll pay for everything, including shipping costs.

I apologize things didn't work out the way they were ought to. I'd like to think that what we learn from what happens in any given scenario, good and bad, helps us ultimately become better.

Why do you guys fuck around with paste when silicone or graphite work as well if not better and is a gazillion times easier to work with????? I've never had any problems with either COB or Illumitex based DIY rigs using those methods. Re-usable too. The only reason to use paste is to Kapton mount COBs IMHO.

And AP want to get an edge? Go to any LED design show and see how many people and little companies are making lighting using little to no aluminum cooling nowadays. That's the future. Start thinking how to use your case to help cool your rig and not just worry about cooling the lights you use.

I received an email from Opticgrowlights saying that they have transitioned over to new ownership and they plan to continue to give growers an option on many different variations of COB based fixtures at competitive prices. They also said the Promo HIGHYIELD will still give growers 10% off.
I have a couple Snake Venoms ,LemonOgs, Cotton Candy Canes in transition now and Golden Cobras,Orca, Viper City Og, veggin out. I will have new update pics of the Vero garden as soon as the new camera gets here? Been using an oldie and finally life over.

FranJan said:

Why do you guys fuck around with paste when silicone or graphite work as well if not better and is a gazillion times easier to work with????? I've never had any problems with either COB or Illumitex based DIY rigs using those methods. Re-usable too. The only reason to use paste is to Kapton mount COBs IMHO.

And AP want to get an edge? Go to any LED design show and see how many people and little companies are making lighting using little to no aluminum cooling nowadays. That's the future. Start thinking how to use your case to help cool your rig and not just worry about cooling the lights you use.

Click to expand...

?

This white walker pheno def had lots skywalker in it. I have 2 packs on order because its just one those crosses that works.Very vigorous in veg and doesn't gain a ton of height in flower.seems to just wanna blow bud sites up during flower.some frostiest buds ive done to date

Moxie Snake Venom (Viper City x Gorilla Glue#4) 4wks

Test Flower run with the heavenbright.com V2 3000K in a 2x2 area with a Emerald Triangle Cotton Candy Cane.
Lots of sunshine with this one!

What are those "reflectors" made of? It looks like half of the light is coming out the sides