Undercurrent build to grow Monsters!!!

DubC_420

Active Member
This is my 3rd UC build. My first is a 4 site with 5 gallon buckets and 15 gallon epicenter with 1 1/2 spa tubing and 3/4" return to a 584 gph pump.
Second was a veg box in a 50 gallon storage box with 3 one gallon containers and a 3 gallon epicenter.
Will post more picks soon.

This build is 14 X 15 gallon containers and a 50 gallon epicenter. 2" abs tubing and a 1" return. I a still trying to resource the right in line water pump. I think I need close to 2000gph.20141008_164954.jpg20141008_165007.jpg 20141008_165024.jpg 20141008_165007.jpg 20141008_164954.jpg 20141008_165024.jpg 20141008_165024.jpg 20141008_165007.jpg 20141008_164954.jpg
 

Attachments

  • 20141008_083825.jpg
    20141008_083825.jpg
    2.3 MB · Views: 29
  • 20141008_084220.jpg
    20141008_084220.jpg
    999.8 KB · Views: 28
Any information on

Water pump suggestions
Air pump suggestions
Air stones suggestions

Will best much appreciated.

Also sourcing parts for 8 X 300 watts cob lights with 200 mm cooling fans.
 
Wow those look bad ass! Very expensive per site though. Will definitely buy 1 for the 50 gallon res. Each site will have 10-11 gallons so 140-154 gallons total and the epicenter will have about 30 - 35 gallons in it
 
I have been considering

a Danner 12000+ GPH pump

or a Ecoplus 1584+ GPH pump.

Air pumps I am looking at 2 x Danner AP-100.
 
This will blow up. Subbed. These will be huge! What strains are you running? Whats the watts? :D

Harlequin
Jack
Sour Diesel
And not sure on the 4th maybe a Blue Dream

Lighting will be a DIY cob less
4 cobs per heatsink

I will have 8 diy lights that consist of:
cob, heat sink, with 220 mm fans.
They should be around 280-300 watts each. So close to 2400 watts total.
 
So I hooked the system up to my 600 gph pump for my tent. Here are a few pics of it running. I might just go with a 1200 - 1500 GPH pump. The 600 is quite impressive!20141009_065830.jpg20141009_065822.jpg 20141009_065837.jpg
 

Attachments

  • 20141009_065830.jpg
    20141009_065830.jpg
    996.4 KB · Views: 8
  • 20141009_065822.jpg
    20141009_065822.jpg
    814.3 KB · Views: 7
  • 20141009_065822.jpg
    20141009_065822.jpg
    814.3 KB · Views: 8
Any information on

Water pump suggestions
Air pump suggestions
Air stones suggestions

Will best much appreciated.

Also sourcing parts for 8 X 300 watts cob lights with 200 mm cooling fans.
I'd recommend 9" spider Air Injection Technology over air stones. A little more expensive upfront but they provide more air, evenly distributed, and last much longer. I just recently started using them and they blow air stones away.
 
I'd recommend 9" spider Air Injection Technology over air stones. A little more expensive upfront but they provide more air, evenly distributed, and last much longer. I just recently started using them and they blow air stones away.

I have been looking into these..
http://shop.modularhydro.com/Six-Pack-AIT-9-SPIDER-For-Hydroponics-six-pack-spider-90.htm

Is that what you are talking about? I think I could make my own out of soaker hose, washers and some connectors and t's
 
As I understand it, the 'science' behind UC is the benefit derived by the continuous flow of water/nutes through the totes, creating a quasi-fast flowing river energy effect. Am I right?

If so, I'm guessing you could have either too much, or, too little flow

IMHO that's the 'thing' that needs to be dialed in


Of course it changes on how long it takes for one complete cycle PLUS how many cycles per hour is ideal to maintain the energy (for which there is probably no instrument to measure), at least within non government budgets

Also consider placing a pile of polished ornamental stones (Dollar store) in each tote to break up the flow (increasing the chi/energy), as rocks would in a fast flowing river. I would also do this with the return T to rez


hth
 
Last edited:
As I understand it, the 'science' behind UC is the benefit derived by the continuous flow of water/nutes through the totes, creating a quasi-fast flowing river energy effect. Am I right?

If so, I'm guessing you could have either too much, or, too little flow

IMHO that's the 'thing' that needs to be dialed in


Of course it changes on how long it takes for one complete cycle PLUS how many cycles per hour is ideal to maintain the energy (for which there is probably no instrument to measure), at least within non government budgets

Also consider placing a pile of polished ornamental stones (Dollar store) in each tote to break up the flow (increasing the chi/energy), as rocks would in a fast flowing river. I would also do this with the return T to rez


hth


I really like your rock idea. It reminded me of someone else that uses them. I totally forgot until your post so thank you very much.
 
I love the set up. How much did you get your 2" bulkheads for? I used Uniseals and they were a pain.

homedepot and lowes. They are 2" shower drains. They work great haven't leaked at all!
I used uniseals in my tent for (4) 5 gallon buckets and an 15 gallon res out of the tent. I used 1-1/2" spa tubing. It was a lot easier to use with uniseals. The 2 " abs works great with the shower drains though.
 
Back
Top