timers???
- Thread starter Pdiddy
- Start date
SparkeySTi
Active Member
Importance of a ground plug when using power strips? I feel its WAY unsafe using a power strip on a timer without a ground, even if your under the amp/watt drawing power of the timer. any thoughts?
dew-b
Well-Known Member
go to manardes get 2 heavy duty timers . the reason for 2 is just incase your main timer dies. then you have a back up.you don't want to be half way through flowering then have your timmer take a shit on you then mess up your whole grow.
Yeah man definately buy 2 and make sure they are decent ones... i had 2 cheap ones.. Both decided to die due to their crap make and nothing to do with overloading from too much power. After reading many posts on here about plants going Hermie i was crapping myself.. Fortunately none of my plants did go hermie and am drying my first batch now..
Best of luck
Best of luck
passiton
Well-Known Member
I echo the comments about spending the money on a timer. I got a cheapo one off eBay. It was constantly screwing up. I'd go to my room and the light would be off when it should be on. I ditched it and spent some proper money on a timer. It hasn't let me down yet.
Peace.
Peace.
SparkeySTi
Active Member
Im just getting multipul sources. My roomie wants to take the easy/cheap way out, and i want just whats right... IE not plugging a power strip into a cheap timer by connecter that leaves out the ground. So thanks for re-asuring my thoughts.
So i assume im also correct in saying NOT TO OVERLOAD! IE do not exceed aloted amps/volts, ect...
So i assume im also correct in saying NOT TO OVERLOAD! IE do not exceed aloted amps/volts, ect...
BlessAmerica
Well-Known Member
I have no idea where you are or if this retailer is around you......
I had BIG timer trouble. Bought two different kinds (both with nuetral line) one was Timex, and the other was some knock off brand..... THEY BOTH SUCKED!!! They would turn off one hour, then on for an hour, on and off for 18 hours. (This was during my testing of them, they weren't installed) I am a smart guy, and I can set a timer. I went to PETSMART and bought one of their timers for 8 bucks. Thing is flawless. I bought the single unit, but they also sell (wish I bought it) a power strip/surge protector with two timers on each end and two "non-timed" for keeping your tank filter on (in this case ventilation system) with a insaine total of outlets (~12). Keep in mind when dealing with growing systems you have to watch how much electricity your pulling, but some tank systems pull as much energy as a small grow.
Good luck
I had BIG timer trouble. Bought two different kinds (both with nuetral line) one was Timex, and the other was some knock off brand..... THEY BOTH SUCKED!!! They would turn off one hour, then on for an hour, on and off for 18 hours. (This was during my testing of them, they weren't installed) I am a smart guy, and I can set a timer. I went to PETSMART and bought one of their timers for 8 bucks. Thing is flawless. I bought the single unit, but they also sell (wish I bought it) a power strip/surge protector with two timers on each end and two "non-timed" for keeping your tank filter on (in this case ventilation system) with a insaine total of outlets (~12). Keep in mind when dealing with growing systems you have to watch how much electricity your pulling, but some tank systems pull as much energy as a small grow.
Good luck
skunkluvr
Well-Known Member
I can't say if digital timers are better than mechanical, but I use only mechanical and no problems. One of them is the kind that you put the little tabs in for the on-off time, and one is the kind that has little switches in 15-minute increments all the way around. I like the one with the little switches better, nothing to lose or fall out of the timer.
BlessAmerica
Well-Known Member
I agree skunk.
I had the tabs and lost em (in an old timer). I like the switch one too.
I had the tabs and lost em (in an old timer). I like the switch one too.
chuckbane
New Member
go with a grounded analog,,, digital is sketchy,, analog you have piece of mind that you didnt get bumped or something and changed... my first day with my new digital programmer i "accidentally" set a second schedule but didnt know it and the lights came back on at midnight (the default time) 4 hours in to the dark cycle... talk about motherfucking light pollution! bad experience..... i didnt even need a timer that had multiple programming capabilities. 12 on 12 off every day,, pretty fucking simple i think the analog can handle it
Similar threads
