Thundercat's Groooooooow

I'll get some pics I promise. Just been busy with everything. I'm working on getting my new light this week too!

What light?

SOMEBEECH said:

Opinions, on why that bud has leafs with no edges?Oh and I did some cuts from the Shores,Rooted fine till they got to the 5th
Set of 5-7 leaves,Then they started throwing out leaves with single blades and 3 blades??

Almost trashed em, but they seem great now with budding going,but stll sometimes the 3 blades??
Genetics? IM lost never have had a plant clone great and grow fine then do that.
Beech

Click to expand...

I have. It was a fooken DNA strain kushberry . For whatever reason some of the blue berry' strains will do this to you.It happens when your light in veg loses a LITTLE bit of lumens.
Dont know if thats it for sure. But try to get it more light.It also when it retarded threw HUGE for whatever reason.I had a love hate affair going on with that plant for around 3 years.
Ive got a small chiller i dont even use.Do you have anyway of getting your res under ground to use the earth to cool it?
If there is a way of directing cooled air on the res tanks and moving the tanks to a cooler area?Indoor design temp all over the US during summer is 70F with a 20 temp drop across the evaporator coil normally.You would be hitting them with about 50 degree air that would cool them.
I assign a BTU load of 3.4 BTU per watt of power for a grow room.Not including BTU ratings for walls and such.
This can change of course by the size of the room.For example i know someone who has a large room with allot of lamps and he doesnt gain heat as bad because its dispersed over a wider area and he gains cooling from the walls of the basement.The heat transfers from the room to the cooler basement walls.This is a huge advantage over above grade grow rooms.In northern climates a grow room might need a/c on with lights on and heat on with lights off.
A a/c can not be ran in northern climates without a head pressure control kit and freeze stats if possible.
I dont mean to clog your thread TC.
Im just throwing out ideas and general information.

Well Jig I'm going to be getting a 4x2 t5 floro setup at some point this week. Its going over my 2x4 tray that is in my veg area. This will give me much better light coverage over the tray and allow me to use the whole thing instead of only about half. Once I get my moms and everything worked out with all the new strains, they will prolly go under my current DIY cfl light, and I'll have a kick ass cycle going! I'm gonna be potting up the newest clones tonight, and cloning all the rest of the new seedlings I have going. With any luck I'll be working them into the flower tray in a month or so.

Hey Max thanks for swinging by, glad you've enjoyed the read. Thanks for the good info.

Here are the Electric Lemon G





And last but I hardly think least are the Tangerine powers!




Everything got topped tonight, not just the Mints. I cloned all the seedlings, and also several of the Sin's OG and Platinum delights that are showing great promise. All the clones from last round went into pots in my tray, and things are looking nice.

Now as par request some bud pics for you guys!!

First up we have the Sin's OG I harvested the other day. I believe this was plant number 2 of 8. The flavor on this is nice, similar to the last OG, but not as strong. The smell is similar to my bubba kush with a bit of coffee, and heavy kush notes.




Heres a few of the critical jack all trimmed up.




The drying rack covered in SDG mostly. With a couple White Widows up top still needing to get trimmed.



Heres a little glimps of my powernap male that is flowering out in my bedroom. I moved it up the other day when I noticed the balls starting to hang a bit low.


Ok guys theres some pics for everyone!! hope you enjoy as much as I have been!

Talk to you guys in the AM.
Peace TC

those plants look great,like the tray setup,sinmints looks very ns and the grow.so yure gonna extract those tops?

Thanks raider, always appreciate hearing from the vetrens!

Which tops are you refering to me extracting? I don't usually do my extractions on the upper buds, mostly just trim and lower buds. I did do an extraction on some of the lower buds from that Sin's OG the other day. They were fresh frozen so I have no idea on weight, but looking at the material, it will easily produce well over a 10% return.


I've got several jars with stuff in the freezer, I need to do a bunch of washes this week. I'm going to attempt to do a larger evap if I can get my big dish to sit on the dehumidifier safely.

Edit: large dish will fit but I will have to get a larger filter screeen.

that looks great as is no preservatives,lol.hell yeah..

The Yellow Goo!
Beech

THanks guys!! Happy SUnday morning!! Hope everyone is having a great weekend.

Got the Large SDG wash done the other day. The b grade evaped out nice and ended up being right at 1g(no idea what went in), with a decent golden amber color. The A grade is still evaping, being bigger washes I'm giving them a tad longer to evap. I've still got a mixed trim wash in the freezer, and a critical jack trim/bud wash as well. The CJ will prolly be tomorrow.

Oh and I got my light yesterday!! Picked up a 4ft x 2ft 8 bulb t5 setup. I'll post some pics later on for ya. Its gonna be way better light coverage for my clones.

Catch you guys tonight

Peace TC

more light is always a good thing. WOOT

sunday is glorious here. Celebrating our boy.

Thundercat said:

THanks guys!! Happy SUnday morning!! Hope everyone is having a great weekend.

Got the Large SDG wash done the other day. The b grade evaped out nice and ended up being right at 1g(no idea what went in), with a decent golden amber color. The A grade is still evaping, being bigger washes I'm giving them a tad longer to evap. I've still got a mixed trim wash in the freezer, and a critical jack trim/bud wash as well. The CJ will prolly be tomorrow.

Oh and I got my light yesterday!! Picked up a 4ft x 2ft 8 bulb t5 setup. I'll post some pics later on for ya. Its gonna be way better light coverage for my clones.

Catch you guys tonight

Peace TC

Click to expand...

You remember me telling you about the yellow goo....thats what mine looked like in your pic above..
Beech

What's up everyone ?: Hadn't been over on your thread TC in awhile bro.. Sorry about that.. won't let it happen again.. haha.. I hope your liking the hell out of your new grow room bro! I had stopped in a few weeks ago and your ladies looked super good buddy!
If you ever get a spare second, please stop in and check out all the ladies I have going.. Thanks bro..

OH! I just harvested my AK-49 (auto) I have in the solocup contest if you'd like to checks that out aswell.. Thanks again bro, take care..

Dank

I do remember you mentioning the yellow goo Beech, and hell if it looked like that I know its spot on .

Edit:Some yellow goo from yesterday


Hey Dank always good to see ya man. Sorry I havn't been by, just been busy with life. I'll swing over and check things out. I have been following your Ak for the auto contest, and its beautiful. I wish mine were that big, my autos are only about 10 inchs tall , but very dense and frosty so I'm holding out for an 1/8 off each.

Hey guys, got a bunch of pics for ya tonight! I'll start with that new light I was talking about(still not up yet ), and the free nute samples the guy gave me to try out.



Had a nice harvest last night, took down 6 Cindys, that huge Sin's OG, and my first platinum delight(which happened to be the "#1" plant of 7). That PD will be staying around I think, it produced some beautiful nugs. It grew as a nice single cola, with rock hard nugs all the way up. The smell I could only compare to the inside of a pumpkin when you carve it, I'm curious to see how that changes as it dries and cures a bit.

Heres the cindys before the trim session till 4 am :facepalm:




Here is the beautiful PD #1






FInally the very tall and lanky Sin's OG. It won't be a keeper pheno, though it was very frosty, it was also airy. I actually trimmed the whole thing up, and froze it for oil, I'm guessing it was about 1.5 oz. should make a nice amount of oil!!





HOpe you guys enjoy!!

Hey guys thanks for all the likes and rep, glad your enjoying!

Been busy the last few days, and this past weekend. Washed 2 different bud batchs, and a larger trim batch. I just finished with the evap on the second wash solution which I combined from the 3 batchs. Its a nice bit, I'm guessing over 2g I'm actually toying with it a little, and seeing if I can make it into a "wax". I have the critical jack A grade evaping right now, and still have to evap the platinum delight, and the a grade trim run.

The garden is looking good, I don't know if I posted it the other night, but I put in 2 lemonG, 2 tangerine powers, and 2 sinmints. All the clones are doing well so I figured I would start the sexing with the seedlings. The other batch of clones I took last week are all starting to get nice roots so they will be going into the larger pots, and under the new floro. Oh ya I hooked it up, and its awesome! I can tilt it at an angle so my smaller clones are under one end and the larger at the other. Its got twice the foot print of the old one which was my big thing though and the plants love it!

Yay, the sinmints popped. I know you've really wanted to try those. Glad you are getting the chance.

One of those Sinmints turned out to be a boy yesterday, so I took and put the last one which was kinda a runt into flower to replace the boy.