Proper & Pure n,n-DMT pull / extraction

QUAD BREATH said:

I like swim's honesty. Tell swim bark is cheap and a chance to look at the other-side is worth more than money. If swim learned from his mistake then all is not lost ......tell swim to get back on the horse and start over. Hopefully, this time, swim will use a "proper" tek

Click to expand...

SWIM just got back to Me, Mates...

Says They "sourced more local bark and spent the last 4 days grinding bark, mixing chemicals, running experiments, and trying to pull as much n,n-DMT as possible. broke 3 bomex turkey basters and two glass beakers."


Then SWIM says They "ran 5 separate pulls..."
"...the first 2 pulls was 125 grams powder and one sat 14 hours, the other 19 hours", "Third and fourth pull was 135 grams each, some chunks and both sat overnight", and "the last pull was 375 grams with direct extraction, no wait.". Says in text message "the last pull was weaker than the other pulls'>.

SWIM also states... "each pull had ratios based off stb, norman, and cybs tek..."

SWIM; "...came out with 4-7 different kinds of jungle spice. 0.8gs-1.2gs TOTAL SO FAR!!!!
some batches came out more purer than others.the more purer product/ batches are still drying..."

"...ill send you what is going on"

So... Apparently, SWIM has pulled about a gram of Jungle Spice n,n-dimethyltrytamine, so far from Their latest DMT extraction/s. I politely asked if SWIM had any images handy or available. I'm hoping SWIM will follow through with that one... SWIM says there is still more DMT to collect.

TBC...

~BBQ



~

Just received a text message from SWIM and SWIM says:
"do not throw away your base solution after the first pull. you can save it for a bigger yield!!!!!!"

~~~~~~~

DO NOT HEAT THE BASE SOLUTION BEFORE OR DURING THE EXTRACTION!!!!

I repeat...

DO NOT HEAT THE BASE SOLUTION BEFORE OR DURING THE EXTRACTION!!!!

HeatlessBBQ said:

Step 8-B.) Let Mixture Settle

~~~~~~~

Click to expand...

~~~~~~~


The migration of Spirit Molecules from the Lye (Sodium Hydroxide) BASE Solution will not bond or attach to the NAPHTHA when heated. Basically, NO aqueous layer will show up when the base solution/ solvent is heated {see in image Step8-B}.

The BASE Solution HAS to cool before the COOL NAPHTHA is ADDED [Step 7]
and THEN the extraction process begins, Mates...

Step 6 and Step 8 is NOT going to help this "Proper and Pure n,n-DMT extraction" AT ALL.

SWIM has been informing Me, [HEATLESSBBQ]...
That the beginning of this thread [PAGE1 AND PAGE2 {posts from HeatlessBBQ} are inaccurate!!!!

However... Thanks to @QUAD BREATH and @Purpsmagurps ,
Their advice mixed together have made this thread a LIFESAVER!!!

SWIM wants to breakthrough with LimE Tek ONLY. SWIM says SWIM is honestly terrified and intuitively scared for SWIM's life if SWIM breaks through with ANY lye [sodium hydroxide] in ANY n,n-DMT oxide.

Your n,n-DMT HAS to look like this. [fats and unicorn blood].

HeatlessBBQ said:

~~~~~~~

Your n,n-DMT HAS to look like this. [fats and unicorn blood].

Click to expand...

That looks exactly like my tray of QWISO when I scrape it .

LONG LIVE TERENCE MCKENNA!!!!!!!






~~~~~~~

Thundercat said:

That looks exactly like my tray of QWISO when I scrape it .

Click to expand...

SWIM just got back to Me and is wanting to start a whole new tek.

Will post updates... If any of You are still following.

yo bbq where is your dmt at

WildCard008 said:

yo bbq where is your dmt at

Click to expand...

Patience, Mate.

Patience...

Just letting the energy settle before the PURE, sets in...

This may stir things up a bit and dispel some unwanted particles.
Stay tuned...

~BBQ

Had some bad weather up here .......woke up to SNOW!



Let these air out for the day.

SWIM just sent Me a new tek involving Calcium Hydroxide INSTEAD of Sodium Hydroxide...

@QUAD BREATH helped guide Us into this method/s.
Cheers and gratitudes, Mates!

--------------------------------------------------------------------------------------------------

1.) GRIND BARK [MHRB, ...etc] - [Finer, the better]

2.) BOIL SOME WATER

3.) ADD WHITE VINEGAR

4.) ADD BOILING WATER

5.) ADD CALCIUM HYDROXIDE- keep water boiling

6.) MIX / MIX / MIX / HEAT / HEAT / HEAT /MIX /MIX/ MIX

7.) OATMEALIZE - SEPARATE ~ PYREX ONLY

8.) ADD NAPHTHA ~~~~~~~> OUTSIDE

9.) MIX / MIX / MIX / HEAT / HEAT / HEAT/ MIX ~~~~~~~> CROCK POT ONLY
PLEASE DO THIS STEP OUTSIDE IN A CROCK POT

10.) POUR AND COLLECT NAPHTHA

11.) REPEAT STEPS 7-9

12.) FREEZE COLLECTED NAPHTHA

13.) POUR OFF NAPHTHA - AFTER FREEZING

14.) DRY AND COLLECT n,n-DMT

QUAD BREATH said:

Click to expand...

~~~~~~~

HeatlessBBQ said:

SWIM just sent Me a new tek involving Calcium Hydroxide INSTEAD of Sodium Hydroxide...

Click to expand...

You should get some nice "Fluffy White" with that tek.

Swim is experimenting with 100g MHRB and a slightly modified Q21 Tek. Those pics above are from a 1st and 2nd pull - back to back with the naphtha combined and freeze precip.

GL mate!

SWIM is finding some time Today and going to do 3-4 more pulls.

This may take a while...

THANK YOU @QUAD BREATH!!!

Ever have taken 75 mgs to 125 mgs of ketamine and then smoked some deemstahs?

The above gif does quite a good job of representing the experience.