Need help!!!

Dr. 3qom

Member
Hello galz and guyz...need major help on my first grow room...and unfortunately time is not on my side...
Details: flood and drain...
Grow room size: 8x18x9
Lights: 4, 1000w MH
trays: 2, 4x8
Res: 2, 70 gl
Medium: 6" rockwool surrounded by hydroton
fans: 2, 8" max-can fans exhaust air out of lights, 1 6" can-fan intake into lights. 8'' max-fan with hepa filter intake fresh air. 2 oscillating fans blowing directly on the tables.

unable to post pics just yet...but will soon...

current problem...Too Hot

My door is sealed with panda film with 2 zippers on it...when the 8" intake is on it pushes the door out...when off, a vacuum is formed.
Temp max in 87, min in 75. w/o Co2, ac

How can i fix the airflow prob...


Im cultivating OG and Bubba any suggestions on nutes and cheap Co2 will be greatly appreciated...also what is the best way of controlling temp in a 70 gl reservoir...thanks

Prohibition is ending!!!...Keep the pressure on!!!
 
Hey man and welcome to RIU
sounds like your off to a good start (other than the temp)
Id say opt for a portable AC they are around 3-500 at homedepot and so on.
Im planning to get one soon as I get some HPSs.
 
Hey man and welcome to RIU
sounds like your off to a good start (other than the temp)
Id say opt for a portable AC they are around 3-500 at homedepot and so on.
Im planning to get one soon as I get some HPSs.


I have a portable AC...but i keep getting either too much exhaust or too much intake...how can I balance it without reaping the door off....
 
I have a portable AC...but i keep getting either too much exhaust or too much intake...how can I balance it without reaping the door off....

Im not sure what you mean? How is it too much? Sry havent gotten stoned yet some Im stumped LOL
 
Im not sure what you mean? How is it too much? Sry havent gotten stoned yet some Im stumped LOL

I dont have solid door...im using panda film to cover the door area...but the unbalance is either stretching the panda film out or is sucking it inward and creating gaps and holes where the staples and tape is...

How do these nutes sound...is it a good mix...
VEG: Sensi grow A+b
SensiCal
Roots Excelurator
Sensizym
Phirahna
Sugar Daddy
Liquid Karma

Bloom: Connoisseur A+B
SensiCal
Roots Excelarator
Sensizym
Phirahna
Sugar Daddy
Liquid Karma
Grand Finale
Briximus Maximus..

Any help is greatly appreciated...Keep smoking
 
I dont have solid door...im using panda film to cover the door area...but the unbalance is either stretching the panda film out or is sucking it inward and creating gaps and holes where the staples and tape is...

How do these nutes sound...is it a good mix...
VEG: Sensi grow A+b
SensiCal
Roots Excelurator
Sensizym
Phirahna
Sugar Daddy
Liquid Karma

Bloom: Connoisseur A+B
SensiCal
Roots Excelarator
Sensizym
Phirahna
Sugar Daddy
Liquid Karma
Grand Finale
Briximus Maximus..

Any help is greatly appreciated...Keep smoking

Hey man
I use Sensi Grow

Throw a table spoon molasses in with the mix and you will b happy, make sure it's blackstrap.
 
I just put 50 platinum OG in veg...i have the lights at 4 ft. the leaves are all dropping after 4 hrs...is this ok...when is the best time to give the first food...been cloned for 2 weeks.
 
you have all MH and no HPS... i seriously disagree with this. try at least half HPS and half MH. really need pics. i dont even want to seem like im tellin you what to do, until you post pics
 
Need to find out whats going on with the plants and what is the best remedy
 

Attachments

  • plant 001.jpg
    plant 001.jpg
    69.3 KB · Views: 21
  • plant 002.jpg
    plant 002.jpg
    73.4 KB · Views: 19
  • plant 003.jpg
    plant 003.jpg
    70.9 KB · Views: 18
  • plant 004.jpg
    plant 004.jpg
    75.8 KB · Views: 20
  • plant 005.jpg
    plant 005.jpg
    73.1 KB · Views: 18
  • plant 006.jpg
    plant 006.jpg
    72.6 KB · Views: 17
  • plant 007.jpg
    plant 007.jpg
    79.1 KB · Views: 17
  • plant 008.jpg
    plant 008.jpg
    77.3 KB · Views: 15
Need to find out whats going on with the plants and what is the best remedy
Howdy, Keep it simple first. Are you sure your roots are getting enough water? The last clones I had that looked anything like yours, were not getting enought water to their roots. Also, a friend used ice in his res to lower the temp until he could afford a decent AC unit:peace:.
 
i checked the rockwool...it was still wet...i purchased the clones today...the guy told me they should be fine for a whole day...they have been under the lights for 7 1/2 hours now
 
how long does it take for clones to recover from transplant shock...when should i start the feeding schedule...any help will do...
 
hey dont start feeding for 3-4 weeks
it can take 1-3 for the clone to recover, sometimes they get shitty about it.
 
18 hrs past after putting babies in veg...im getting a whitish yellowish spots on the base of the stems...where the stem is touching the rockwool...any idea what that might be? just fed the babies with 350 ppms (roots excelurator, pirahna, sensizym, sensical, and sensi grow a+b...any advice on nuts...is it too much or too little?
 
18 hrs past after putting babies in veg...im getting a whitish yellowish spots on the base of the stems...where the stem is touching the rockwool...any idea what that might be? just fed the babies with 350 ppms (roots excelurator, pirahna, sensizym, sensical, and sensi grow a+b...any advice on nuts...is it too much or too little?

man I told ya to wait on the nutes, what did ya do?

Take care.
 
3 days in...dark purple stems are starting to turn green...(i think their relieving stress)...root growth has exploded...some plants are showing thickness in the bottom of the main stem...is that good growth?
temp 77.7
ph 5.8
RH 30% (is this too low)
24 hrs on
last feed 400ppms
 
3 days in...dark purple stems are starting to turn green...(i think their relieving stress)...root growth has exploded...some plants are showing thickness in the bottom of the main stem...is that good growth?
temp 77.7
ph 5.8
RH 30% (is this too low)
24 hrs on
last feed 400ppms


seems a lil high on nute level at this stage...anyone disagree/agree?...i burned a little at week 2...also i noticed that they seem to grow faster with a little rest period..i recently reduced my light hours due to the high electricity bills from 24/0 to 20/4 and noticed that they seem to like it more....increase growth,give them a break, and lower the bill.
 
50 plants growing rather well now...20 days in veg...height is doubled and in some tripled from transplant height...random spots on the grow tray have plants that are showing deformed leaves...theres 5 leaf sets in the middle, where the new growth is having 3 set leaves with round edges...what can be the cause...im getting a lot of nodes, on a 10 ince plant i have 8 nodes...on a 13 inch plant i have 10...is that ok?...thanks a a lot..first grow
 
Back
Top