smokebowls
Active Member
what is the best and easiest way to make hash??? i have over an 0 of female leaves.. any suggestions will be greatly appreciated!
SMOKE²BOWLS


SMOKE²BOWLS



can u give me the breakdown of one of those on how to do it??
smokebowls
![]()
can u give me the breakdown of one of those on how to do it??
smokebowls
![]()
Dude, make some BHO hash. Purest hash oil IMO.
Dry your ounce of leaves slowly. While they're drying, purchase the following:
3ft of 1" diameter PVC/ABS tubing
And two ABS/PVC caps for this pipe.
Some PVC/ABS glue as well. Careful, you need to get only ABS glue for ABS piping (white plastic pipes) or only PVC glue for PVC piping (black pipes). Ask a local home depot guy for this crap, say it's for a project or something.
Some cheap coffee filters
A small elastic.
A large can (at least 8oz, 16 is best) of pure butane gas.
Then, glue the bottom cap on and let it dry for 30m or so. Drill 5-6 TINY holes (no more than 4mm in diameter, a 7/64" drill bit works perfectly).
Fold your coffee filter over this recently drilled cap, and affix it with the elastic (you want to prevent any shit from falling through the holes, into your collection glass/pan.
Then, drill a single hole in the top cap (using a bit that matches the size of your butane can's injector tip, 7/64th worked for me) and load the tube with as much powdered dried leaf as you can fit in there. Don't pack it tightly, but make sure it's fairly full.
Cap the top, and empty the can of butane into the top. It will be VERY cold, so wear oven mitts! Hold the tube over your large glass measuring cup/pan/whatever can hold 8-16oz of fluid. Deposit the ENTIRE can into it (if it's an 8oz can) or half the can (16oz).
After about 2-3 minutes, an amber coloured FREEZING cold liquid should empty out the bottom. This is almost pure THC. Let this evaporate, and you're left with pure hash oil.
Google it for a better writeup. Sounds like a lot of work, but you can re-use the extractor over and over again, and this stuff is hella potent.
peace.
Dude, make some BHO hash. Purest hash oil IMO.
Dry your ounce of leaves slowly. While they're drying, purchase the following:
3ft of 1" diameter PVC/ABS tubing
And two ABS/PVC caps for this pipe.
Some PVC/ABS glue as well. Careful, you need to get only ABS glue for ABS piping (white plastic pipes) or only PVC glue for PVC piping (black pipes). Ask a local home depot guy for this crap, say it's for a project or something.
Some cheap coffee filters
A small elastic.
A large can (at least 8oz, 16 is best) of pure butane gas.
Then, glue the bottom cap on and let it dry for 30m or so. Drill 5-6 TINY holes (no more than 4mm in diameter, a 7/64" drill bit works perfectly).
Fold your coffee filter over this recently drilled cap, and affix it with the elastic (you want to prevent any shit from falling through the holes, into your collection glass/pan.
Then, drill a single hole in the top cap (using a bit that matches the size of your butane can's injector tip, 7/64th worked for me) and load the tube with as much powdered dried leaf as you can fit in there. Don't pack it tightly, but make sure it's fairly full.
Cap the top, and empty the can of butane into the top. It will be VERY cold, so wear oven mitts! Hold the tube over your large glass measuring cup/pan/whatever can hold 8-16oz of fluid. Deposit the ENTIRE can into it (if it's an 8oz can) or half the can (16oz).
After about 2-3 minutes, an amber coloured FREEZING cold liquid should empty out the bottom. This is almost pure THC. Let this evaporate, and you're left with pure hash oil.
Google it for a better writeup. Sounds like a lot of work, but you can re-use the extractor over and over again, and this stuff is hella potent.
peace.