My Space and how I can use it effectively

miraclegro

Active Member
This is my first time trying to grow and am purely in the design stages and my space available is 16'x6'x8' (LxWxH). I'm very curious on how many plants I could fit into that area. For the space I have it mapped out for 16 plants receiving a set growing area of 2'x3'. I'm interested in a 1000w HPS lighting system but that's rather costly to begin with. In a lighting thread, I noticed it saying the sun produces 10k lumens per square foot so I aimed to repeat that. In the space I calculated it needed 7.8XX lights, rounded to 8, and that is quite a lot of money for 8 lights ($500 for bulbs) and seems like I will have created my own tanning bed. I have an intake and exhaust system planned out, as well as extreme air circulation (anything more and there should be a tornado). I should be building my area within the next few weeks so pictures of that will be available.

Questions:
How many plants can I get in that space?
What types of light are best for their cost?
 

VictorVIcious

Well-Known Member
Welcome to the forum. If you all ready have it planned to put 16 plants in each 2' by 3' area, I can only assume this is a trick question. And only 8-1000 watt furnaces, wow. Soo.. how many can you put in there?? VV
 

miraclegro

Active Member
And only 8-1000 watt furnaces, wow.

Would that be enough? The site I found said 150k lumens per bulb so I decreased it to 130k and did the math.

I totally mistyped. I have it mapped out for a total of 16 plants, one plant per 2'x3' area. I'd like to get as many as possible but since this is my first time, I have no clue how big they get and what kind of space they should have. Could I get 16 plants in that single 2'x3' slot? Since they get bigger and must be transplanted several times I expect that 16-5 gallon buckets would not fit.
 

VictorVIcious

Well-Known Member
Would that be enough? The site I found said 150k lumens per bulb so I decreased it to 130k and did the math.
you would Need the tornado to keep it cool.

I totally mistyped. I have it mapped out for a total of 16 plants, one plant per 2'x3' area. I'd like to get as many as possible but since this is my first time, I have no clue how big they get and what kind of space they should have. Could I get 16 plants in that single 2'x3' slot?
Well, yes you could. I wouldn't, some do so very successfully. You could fit 4-6" rockwool cubes per square ft. so you could potentially put 24 in the space. Maybe you can see the reason for my answer. A newbie is not going to be able to accomplish this kind of grow, I certainly can't.
Doing so does require the amount of lighting you are talking about.

Since they get bigger and must be transplanted several times I expect that 16-5 gallon buckets would not fit.
I think you are trying to say you (hahaha), don't think you should have to explain that you didn't think the 16-5gal buckets will fit in a 2'by3' space. So silly of me, of courseI should have known about your mistake and I should have known you were going to use 5 gallon pots. Hahahaha. Look dude, you are right they will get bigger, if you let them, they do not have to be transplanted several times unless 2 is considered several and the experts recommend that you use maximum 3 1/2 gallon pots unless you want to inhibit growth of the above ground part of the plant.
Soo... now that we all understand you have some more research to do lets get started, ok??
All of this talk about sunlight and maximum and I did the math is confusing, at least it was to me. And then cloning and lst and sog etc., etc. Lets try to make some progress, one area a time. The first decision would have to be your growing medium, what you are going to 'grow' your plants in, sound like you have decided on soil, which makes the systems you might have chosen, ebb and flow, dwc, nft etc
bad choices, they don't work well with soil. Soil is easier to work with at first, I don't think flood and drain is that difficult, flithy fletch swears his dcw is easy to learn as well. You won't have to worry about any of those for now.
The best source I have seen for a new soil grower, with all of the information you need to get growing is SeeMoreBuds new book, "Growing Marijuana For Less". If 8oz of bud from three females isn't enough for you then just multiply, do the math. Need two pounds, invest $400.
The system to cool 8-1000 watt lights would cost more than that.
Read some journals. My space isn't exactly the size of yours, I have a little more room, but some of that is taken up by the heater and you may not need that. And I'm not growing in soil, I do have some discussions about lighting and options, how to get a 'system set up' for a 'perpetual harvest', things like that that you may find of some interest. If there is a mistake to be made, I have made it. Its like Prego,"Its in there".
You will of course want to read some 'soil grow' Journals, I think widowmaker has one, I'm not sure if Garden Knowm has one here or not, he wrote the book, He is SeeMoreBuds. I have to admit I have had to skip all of the soil grows to learn more about the system I am using.
Keep one thing in mind while you are planning this. A GROW ROOM WITH NO ROOM IS A PAIN IN THE ASS!!
leave room to walk around and tend your plants that isn't under a furnace. VV:blsmoke:
 
Top