Matt Rize
Hashmaster
But no one uses lighters anymore. I don't even know where my bic is. Dabs all day and night.
And for the records, its not me w the tami
I generally dont smoke bho that has not been "drying" for a full month.
More Money then Brains -OR- hey look I got a new Tamisium Extractor!
- Thread starter randomseed
- Start date
And for the records, its not me w the tami
I generally dont smoke bho that has not been "drying" for a full month.
str8sativa
Well-Known Member
View attachment 1985644 fresh batch of williams wonder moon rocks
str8sativa
Well-Known Member
closeup golden goodness
Dan Kone
Well-Known Member
What are moon rocks exactly? I see them all the time, just not sure what makes something a "moon rock".
Matt Rize
Hashmaster
its budder, just more slang.
str8sativa
Well-Known Member
but its harder then butter almost like crack rocks and breaks up into powder easy to sprinkle on bowls
OGEvilgenius
Well-Known Member
I hear that, I guess what I'm saying is I doubt a microscopic amount of butane is going to be any worse for you than going outside and standing on the street for 3 seconds.But no one uses lighters anymore. I don't even know where my bic is. Dabs all day and night. And for the records, its not me w the tami
Dan Kone
Well-Known Member
That's what I've seen called "moon rocks" at dispensaries too. Never necessarily looked like an oil based product to me.
str8sativa
Well-Known Member
its a step past oil i like cause it seems really clean minimal butane residue, the oil seems dirty some times even after purging
Matt Rize
Hashmaster
str8sativa
Well-Known Member
show me yours ill show you mine. i know you have a flick of the wrist to make it ice wax
Matt Rize
Hashmaster
are you joking? I have an epic sized thread in this subforum where I detail my whole process. it has 26K hits, you cant miss it.
i dont even care about your bho, but it doesnt look great so I was wondering what you were referring to. no worries.
str8sativa
Well-Known Member
ive seen it. the bho doesnt look great? in oil or butter form? what do you mean
Matt Rize
Hashmaster
its no hammond (does everyone know this term? soft shatter or soft jolly rancher texture). and its not an erl. it looks very waxy. so... i ask you, what is so special about it? My tutorial has 26K hits and endless research put into it, it is not an issue. I usually dislike any solvent extracts that are very waxy. you don't have to tell me if you don't want to, but don't pretend like my tutorial isn't in this same forum. i have no secrets anymore. thats what sets me apart from the other hashmasters.
water purged?
dissolved and filtered?
dry ice in the blast tube?
for sure you whipped it... what else.
str8sativa
Well-Known Member
i prefer butter over the glass one step passed that kinda to. and that was right after it was made has since dried and is more crumbly. ive tried making bubble from your video and couldnt get full melt like yours props. so you blast it into the pyrex that is sitting in almost boiling water let it bubble for about ten minutes pop the bubbles, do a zig zag pattern in the oil which will make a bunch of small bubbles.(this is first water purge) then bring the pan inside straight into a second boiling water bath, let it bubble for about ten minutes pop any remaing bubbles and start scraping the oil together in middle of pan,it will still be a dark oil at this point. this is where i do it a little different then most people take the pyrex dish with the oil glob and put it in the fridge for a rapid 15-20 minute cooling. have boiling water standing by for third and final hot water purge, put the cold pyrex dish into the slightly less then boiling water (it will not crack or explode trust me) let the oil warm for a minute start pushing and spreading it around with dabber begin to whip it will go from dark to a lighter peanut butter color within 2 minutes. keep whipping and spreading the oil and it will start to solidify before your eyes and turn bright yellow gold flakes every time no matter the strain.
pharmacoping
Active Member
I got one last year and it paid for itself in a month. after a learning curve this will be second nature to you, and your product will just keep getting better. so cool to see someone else serious about safety, toxicity, and purity....some of the reasons we made the plunge.good luck man ! I only use buds now, and final shake. produces a much higher purity and potency, the kind we chase. scraps go to the bunnies !with some temp manipulation, you can get different oils out. your product should be dried before you extract. I put it all in a big zip and crush it, press it down with a dowel, packed pretty hard, takes about 2 hours to extract, recover 95-100% of the butane. with a hotplate/freezer its a fast recovery. peace1- what goes in my tamisium2- what comes out( I use 99%iso for a carrier, bout 10ml. no scraping here, pours out, gentle heat decarboxylates the cbd/thc and evaporates the iso, checked by weight of in/out. 3- assembled4mag stirrer-I use it lots, but activated charcoal is stirred with my oil for some time, especially for amber glass, or shatter, gets the material clear, like thc is supposed to be. 5 - what comes out of a run, about 9 grams of one hit wonder.the lab pure butane was apian in the ass, but I get it now, bout 200 bucks for bbq size tank
pharmacoping
Active Member
everything is tare weighted in the beginning of each run. when the extraction is finished you can see the numbers are as exact as ones scale is accurate. 100% of the butane used to extract is purged from the oil before its gathered, or even seen. The numbers are checked and re checked because they are live. there is no butane remaining in the oil, and besides, oil is heated before it gets to your lungs, and all butane wil evaporater before that. in pvc or contraption extraction, there is more than butane firing up at that toke. propane and most important mercaptan, and about 12 other gases( I can list if you need it) i'm talkin about vector5x too.
the tami encloses the entire operation resulting in no exposure to air or you. the system is non flammable when used correctly. with a series of cooling and mixing and warming, like said earlier, it becomes this rock candy stuff as it dries up. we dont like it around the thumb, but ear wax and jelly are hot.
the tami encloses the entire operation resulting in no exposure to air or you. the system is non flammable when used correctly. with a series of cooling and mixing and warming, like said earlier, it becomes this rock candy stuff as it dries up. we dont like it around the thumb, but ear wax and jelly are hot.
pharmacoping
Active Member
read the simple manual, twice even, and get an understanding of the chemical aspect of this type of extraction. It's amazing if you have no chemistry background and the machine is a piece of functional art if you do.
flowers at ambient temp extract best. the slower your butane is released the more waxs you'll have in your oil. no biggy for newbies, but we taste the impurities, and so will you , soon.
I freeze my empty vessel, warm my butane vessel, and extract within minutes, wait about an hour, when the temp of the mj vessel stabalizes(no more tane in the weed), freeze my empty tane vessel, warm the "oil holding tank" and recover all of the liquid butane in two hours, for next time. as instructed i got the siphon for the large 99.5%(you cant afford 99.9%) butane canister, like a bbq propane tank, so when the valve is cracked no gas comes out, it sucks liquid from the bottom of the tank, so we only deal with the liquid, not gas.
I use 10-20 ml , splash, of 99%rubbing alcohol from meijers to put in the holding tank prior to extraction. no scraping, yuck. my oil pours right out when done, heated, evap,decarboxylated, and charcoal stirred/filtered all in one shot. any other alcohol has icky sugars in it that dont evap when heated, like everclear, which is great for a thc spray, or tincture, but not for smoking.
have a blast man, be very very respectful of this machine. with 400grams of liquid butane, not to mention any butane stock, if you had a leaky o-ring, and a flame, you will die, and that end of your house will fall. no flames, no leaks, make sure.... comes with dozens of o rings, good for about 10 extractions each. then to home depot in the big blue drawers ! I could extract in my sleep now,( Not really, for the pic mongers) but it is second nature after a month or two. works good with herbs and lemon balm, and uh....other yard flowers too, ahem.
flowers at ambient temp extract best. the slower your butane is released the more waxs you'll have in your oil. no biggy for newbies, but we taste the impurities, and so will you , soon.
I freeze my empty vessel, warm my butane vessel, and extract within minutes, wait about an hour, when the temp of the mj vessel stabalizes(no more tane in the weed), freeze my empty tane vessel, warm the "oil holding tank" and recover all of the liquid butane in two hours, for next time. as instructed i got the siphon for the large 99.5%(you cant afford 99.9%) butane canister, like a bbq propane tank, so when the valve is cracked no gas comes out, it sucks liquid from the bottom of the tank, so we only deal with the liquid, not gas.
I use 10-20 ml , splash, of 99%rubbing alcohol from meijers to put in the holding tank prior to extraction. no scraping, yuck. my oil pours right out when done, heated, evap,decarboxylated, and charcoal stirred/filtered all in one shot. any other alcohol has icky sugars in it that dont evap when heated, like everclear, which is great for a thc spray, or tincture, but not for smoking.
have a blast man, be very very respectful of this machine. with 400grams of liquid butane, not to mention any butane stock, if you had a leaky o-ring, and a flame, you will die, and that end of your house will fall. no flames, no leaks, make sure.... comes with dozens of o rings, good for about 10 extractions each. then to home depot in the big blue drawers ! I could extract in my sleep now,( Not really, for the pic mongers) but it is second nature after a month or two. works good with herbs and lemon balm, and uh....other yard flowers too, ahem.
Dan Kone
Well-Known Member
Why is that? Are people without chemistry degrees incapable of following instructions?