Licensed Grow Room. Can only have 12 plants. Need Advice.

Smokedogg76

Well-Known Member
I need help with my setup. I'm getting my license to grow up to 12 plants at one time. My grow room is 9' x 7' with 6' ceiling. I plan on growing 2 PPP and 2 AK-48 plants, cutting 4 clones from 2, and saving 2 for motherhood. Any suggestions for my current plan.

  • 400w AgroSun HPS
  • BMO fertilizers
  • CO2 regulator w/ tank
  • 2 fans
Am I missing anything?

Is it possible to set it up where I harvest every 3 weeks? Keep in mind I can only have 12 plants at one time.
 
I would get 2 grow tents, 6 plants each. Start with a mother. If you get a 8 week flowerer, you can veg for 2 monts, flower 2 months. You'll get a nice size harvest every two months. With more than enough to smoke.
 
Have you considered using 2 600s instead of a single 1000 so you get better light coverage?
 
400W for 12 is a bit light. But f you have the MH also, run both. Adding MH to flowering has some perks other then just the extra light. I'd just rotate the lights or plants every few days.
 
I need help with my setup. I'm getting my license to grow up to 12 plants at one time. My grow room is 9' x 7' with 6' ceiling. I plan on growing 2 PPP and 2 AK-48 plants, cutting 4 clones from 2, and saving 2 for motherhood. Any suggestions for my current plan.

  • 400w AgroSun HPS
  • BMO fertilizers
  • CO2 regulator w/ tank
  • 2 fans
Am I missing anything?

Is it possible to set it up where I harvest every 3 weeks? Keep in mind I can only have 12 plants at one time.


you may get something from this https://www.rollitup.org/grow-room-design-setup/167842-air-handling-4x4x8-430watt-flower.html
 
dude your going to need at least a S&P TD 150 fan for your exhaust, and the same for the intake,then use yer speed control switch, check out my room, i just got done with it about 3 wks ago........I'm using 2 400w HPS, and mine stays @ 77 ish deg.......oh and you will need a circulating fan too.

http://www.hvacquick.com/spfnconfig.php?fm=td
 
I'm adding a 400w HPS Hortilux. Now I'm up to 800w. Is it possible to maintain 2 mother plant so that after every harvest I can take 5 clones from each plant every 9 weeks?
 
I'm looking for an inline fan and mylar today. Gonna try to make the DIY carbon filter too. Does anyone know of any designs for a turntable large enough to hold ten plants? I think a turntable could maximize the chance of the plants catching more rays.
 
I have three spots i use in my grow cycle. one for clones that are rooting under full blue spectrum florecents. my veg box i also us fbs. My flower room I have a 400 watt HPS, so i use a MH conv bulb for a week or two and then i hit them with the HPS. Well here is a pics and dates of how long it took with the cov bulb. The first pic is my cloning house taken may 3. second is under the con bulb. I put them in there may8 the pic was taken may17. third is 3 days under the HPS may 22, and fourth is jun 2 (HPS).
 

Attachments

  • IMG_3459.jpg
    IMG_3459.jpg
    93.4 KB · Views: 8
  • IMG_3483.jpg
    IMG_3483.jpg
    101.7 KB · Views: 8
  • IMG_3489.jpg
    IMG_3489.jpg
    78 KB · Views: 9
  • IMG_3569.jpg
    IMG_3569.jpg
    67.5 KB · Views: 8
This is my second grow so i ant no pro but what i have seen and herd I would suggest leaning more turds a cooltube. It will keep the heat down and you can get them closer to the light.
 
I'm still in the building phase of my project. Once I finish I'll send some pics. Questions, comments, and concerns are welcome. I appreciate any and all help.
 
Back
Top