Larry OG vs. Tahoe OG in Dual Monster Plant System (2nd Scrog)

AzCannaMan · Feb 13, 2012

lordjin said:
I'm finally at the point where I can stop burping. Done! But how long will it last me? I still have a shit load of medium grade.

The fully cured characteristic OG smell is just now finally making its appearance. That's almost a full two months of curing, boys and girls. So if you're growing OG, you gotta wait at least a month and a half for the smell to smell like what it's supposed to smell like. If you smoke all your shit in less than two months, you don't know what it's really supposed to be like.

Unless you use "the old hippy trick" mentioned in this thread which also includes a scientific explanation of how and why it really works. I wont save you the reading, and it's not all on page 1, so read about the first 20 pages in.... but in essence you can make 1 week in jars taste like a full month if done right.

It would be very easy to do on your set up Jin. Just turn off the air pumps & lights for about 3 days after its done and "drown those bitches" Cure time cut in 1/4......

https://www.rollitup.org/general-marijuana-growing/409622-truth-about-flushing.html

^^^^Click Here ^^^^

lordjin · Feb 13, 2012

Mohican said:
LJ - What is your timing on the following?:
- Lights (Vegging)
- Bubblers
- Sprayers
Thanks,
Mo

P.S. - Try zinc - it is like H2O2 for humans!

Edit - The roots are coming out of the bottom of the cube and the "Dribble Ring" is actually squirting a good stream of water at the side of the net pot from below. How long does it usually take for you to see roots come out of the Hydroton? Have you ever grown from seed?

Edit 2 - What kind of timers do you use?

Well you sure are keeping me on my toes, aren't you? I go 18/6 on veg. Bubblers always on. Sprayers I play around with depending on how the strain behaves -- currently running 15 on 15 off in the light, 15 on 45 off in the dark.

Dribble ring should be fine. Just make sure you have it timed and not constant. I usually see roots anywhere between 4-6 days from planting.

I use the regular 15 on 15 off timer for my sprayers and ac. The lights are hooked into their own heavy duty outdoor timer.

flowamasta said:
I'm sure that she's deliceous. thats what i'm sure about!

thanx for they feedback, clones are looking great, in the pic i for got to mention, the 2 powder clones are the 2 bottom left, the rest i done with root gel. The 2 looking the best are just the biggest and they seem to have a better initial life support than the smaller clones, smaller clones seem to root faster though.
That Nikon takes pics by itself man, i swear i haven't got a bad pic on it anymore, it actually blinks green if it can focus 100% then you click that simple, i can take macro shots from as close as 3cm to 3 metres away, and it will still focus entirely! bloody amazing camera, except on 16mp pics are bout 8mb before compression.

nice pics man! i just keep fallin in love with these babes you keep postin! love ya work maaaaaaaaaate!!!

Cheers, mate. Keep it coming. I'm sure lotsa folks are here to see your stuff as much as mine now.

DST said:
Interesting what you were saying about the model, mymind briefly skipped over a similar thought in the original set of pics but didn't formulate it to that leve. But she has a sort of boyish look sometime, but then some pics like smoking hot features....

Well after getting on the right track after my operation the other week I went out for the first time in 3 weeks and got bammed up with the fukkin cold/flu virus as well. Felt like a smack head on a bad comedown for the last 3 days. DOG and Erl bongs to the face help knock me out, and I have been taking the odd crappy tablet....

Hope we both get better soon, positive anti cold vibes coming your way!

Thanks for the positive cold vibes. I feel really fucked up right now in all honesty. Smoked much weed, high as fuck, sick as fuck... not really sure where I am or what I'm doing right now.

Yeah, you devil. "Boyish" is exactly how I would describe her look. That's how Elle Macpherson was often described. I think it's a huge turn-on.

lordjin · Feb 13, 2012

AzCannaMan said:
Unless you use "the old hippy trick" mentioned in this thread which also includes a scientific explanation of how and why it really works. I wont save you the reading, and it's not all on page 1, so read about the first 20 pages in.... but in essence you can make 1 week in jars taste like a full month if done right.

It would be very easy to do on your set up Jin. Just turn off the air pumps & lights for about 3 days after its done and "drown those bitches" Cure time cut in 1/4......

https://www.rollitup.org/general-marijuana-growing/409622-truth-about-flushing.html

^^^^Click Here ^^^^

What is this witchcraft you speak of? I'll read it.

Mohican · Feb 13, 2012

LJ - Get off your toes - hehe
What brand/model of timers do you use?
Cheers,
Mo

lordjin · Feb 13, 2012

Mohican said:
LJ - Get off your toes - hehe
What brand/model of timers do you use?
Cheers,
Mo

Hydrofarm makes a full line of digital and analog timers. That's what I use for the ac and sprayer pump. The lights are controlled by a heavy duty digital unit manufactured by Intermatic.

flowamasta · Feb 13, 2012

what kind of fans u running jin?? cant remember if ive read it or asked??? sorry bout that!

only curious cause you talked bout PM in your last grow...this happens with poor circulation? i may do a little reading on this, ive never met anyone down here that has had PM, good to know information, cheers in advance

jojo2002 · Feb 13, 2012

hope everything is good Jin... just found spider mites going to go buy some lady bugs or praying mantis not sure yet...

lordjin · Feb 13, 2012

Center mass. No problem here.

Tahoe side. No problem here.

Larry side. Urrrgh. Still working on it.

All in all, pleased with the bounce back. I gotta flower soon.

lordjin · Feb 13, 2012

jojo2002 said:
hope everything is good Jin... just found spider mites going to go buy some lady bugs or praying mantis not sure yet...

Praying Mantis! Praying Mantis!

flowamasta said:
what kind of fans u running jin?? cant remember if ive read it or asked??? sorry bout that!

only curious cause you talked bout PM in your last grow...this happens with poor circulation? i may do a little reading on this, ive never met anyone down here that has had PM, good to know information, cheers in advance

I've heard a lot of talk about the possible causes of powdery mildew. I recently saw a video of a veteran grower admitting that he himself is not absolutely certain as to what the direct cause might be in every case. Strain? Environment? Both? Probably both...He was pondering this question deeply as he smoked a huge bowl... hilarious.

In my case it isn't lack of air circulation. If anything, I have too much air movement.

Here we have the computer fan mounted on the light hood. It sucks the surrounding air and blows it over the bulb, assisting the main blower fan.

The suction circuit connects from the computer fan to the main suction fan via 4" ducting.

The circuit ends through the carbon filter I have mounted externally.

My humidity is low, too, so it wasn't that. Then why did I get PM? Some strains are more prone to contracting it (OGK for example). And it's my belief that it comes from a root zone not being 100% clear of micro-organisms.

jojo2002 · Feb 13, 2012

im thinking about but each egg casing has 100 babies!!! I only have 2 plants and only one leaf was affected so i snipped it off there was only one little bugger on it i killed it and removed it the others look fine sprayed some neem/soap on them there 3 weeks in flowering I didn't see any damage so im kinda in a limbo...

lordjin · Feb 13, 2012

jojo2002 said:
im thinking about but each egg casing has 100 babies!!! I only have 2 plants and only one leaf was affected so i snipped it off there was only one little bugger on it i killed it and removed it the others look fine sprayed some neem/soap on them there 3 weeks in flowering I didn't see any damage so im kinda in a limbo...

Hm. I've never had bugs before, so I can only wish you luck without any practical advice. But Serenade does everything Neem does... and it's not oil. Hopefully I won't get PM so I can let you have my practically full bottle.

jojo2002 · Feb 13, 2012

i used doktor doom last time and got rid of them... i have to look at Serenade a trip to the store is required tomorrow... How you feeling you should drink some Thera-flu should be nice with these nasty winds..

AzCannaMan · Feb 13, 2012

lordjin said:
What is this witchcraft you speak of? I'll read it.

"Old Hippie Trick" Drown your plants once their done. This deprives them of oxygen (intentionally), do it long enough and the plant will produce alcohol... Then you cut down, the plant actually starts curing before you even chop it. Then continues to cure while you dry it. And the alcohol created during the drowning helps greatly speed the fermentation process breaking down the starches and sugars in the plant, leaving you with your cured bud. Supposedly 1 week in the jars if you do the drowning and they taste like they have been in the jars for a month. So prob 10-14 days would taste like your month and a half cure. There are a SHIT LOAD of people in that thread who use it and post up saying it really does work.

flowamasta · Feb 13, 2012

lordjin said:
Praying Mantis! Praying Mantis!

I've heard a lot of talk about the possible causes of powdery mildew. I recently saw a video of a veteran grower admitting that he himself is not absolutely certain as to what the direct cause might be in every case. Strain? Environment? Both? Probably both...He was pondering this question deeply as he smoked a huge bowl... hilarious.

In my case it isn't lack of air circulation. If anything, I have too much air movement.

Here we have the computer fan mounted on the light hood. It sucks the surrounding air and blows it over the bulb, assisting the main blower fan.

The suction circuit connects from the computer fan to the main suction fan via 4" ducting.

The circuit ends through the carbon filter I have mounted externally.

My humidity is low, too, so it wasn't that. Then why did I get PM? Some strains are more prone to contracting it (OGK for example). And it's my belief that it comes from a root zone not being 100% clear of micro-organisms.

sorry jin! thanx for trying to answer me, i should of clarified a little better, what fans are blowing the plants?? i see you got one for the bulb attatched to you light hood, and thats venting out through the carbon filter, but what is moving the air around the plants? from the information i have read the plants should always be fluttering in a breeze except for when they are very young

sorry man, not in any way pickin, just tryin to picture what you got goin on.

cheers again in advance

nice fans on that tahoe mate ! looking forward to see those babies flower!

inhaleindica · Feb 13, 2012

JoJo- If they are late in flowering Mighty Wash works great! I have used it and they are dead the next day. You could wash every leaf with palmolive dish soap in water. Only a few drops of soap will do the job. Its more time but cheaper so you pick.

Jin! Looking awesome man. I went by Progressive Options and picked me up a few clones. One of them is the Tahoe OG woot! I can't wait to see results in a few weeks. I will post up a picture tomorrow when the lights go on. I had to run in the room and throw them in the cloner for the night ha.

DST · Feb 14, 2012

From my understanding PM is a disease that once it get in the plant is is just purely a fight to get it to stay away (nothing completely rids it from your plant). The people putting out OG cuts probably have had PM on their plants and this disease is passed through to the clones, so it is just waiting to rear it's ugly head....

lordjin said:
Praying Mantis! Praying Mantis!

I've heard a lot of talk about the possible causes of powdery mildew. I recently saw a video of a veteran grower admitting that he himself is not absolutely certain as to what the direct cause might be in every case. Strain? Environment? Both? Probably both...He was pondering this question deeply as he smoked a huge bowl... hilarious.

In my case it isn't lack of air circulation. If anything, I have too much air movement.

Here we have the computer fan mounted on the light hood. It sucks the surrounding air and blows it over the bulb, assisting the main blower fan.

The suction circuit connects from the computer fan to the main suction fan via 4" ducting.

The circuit ends through the carbon filter I have mounted externally.

My humidity is low, too, so it wasn't that. Then why did I get PM? Some strains are more prone to contracting it (OGK for example). And it's my belief that it comes from a root zone not being 100% clear of micro-organisms.

AzCannaMan · Feb 14, 2012

inhaleindica said:
JoJo- If they are late in flowering Mighty Wash works great! I have used it and they are dead the next day. You could wash every leaf with palmolive dish soap in water. Only a few drops of soap will do the job. Its more time but cheaper so you pick.

Jin! Looking awesome man. I went by Progressive Options and picked me up a few clones. One of them is the Tahoe OG woot! I can't wait to see results in a few weeks. I will post up a picture tomorrow when the lights go on. I had to run in the room and throw them in the cloner for the night ha.

NICE! I just got one from them on Saturday too! Was yours skimpy as hell too? Lol

Cant wait to run this strain! Jin's finished nugs look sooooooo kill :weed:

inhaleindica · Feb 14, 2012

AzCannaMan said:
NICE! I just got one from them on Saturday too! Was yours skimpy as hell too? Lol

Cant wait to run this strain! Jin's finished nugs look sooooooo kill

Skimpy? Mine were pretty good sized I would say about 1/4 inch thick 2 inches tall. Tahoe OGs are known to be lanky and hard to control so scrog like Jin is probably the best way grow this strain. I have grown Cali Connect Tahoe OG they were awesome but hard for a beginner. This one is an Original Clone so I am excited to see the difference when I finish it. Thanks to Jin I have found the Tahoe OG I was looking for. Well lets say that when I harvest ha. Jin's finished nugs are the reason why I went by the place heh. They should be paying Jin for advertising lol.

lordjin · Feb 14, 2012

The aerial of the Tahoe side. A sight to behold. Try to count the tops.

Center mass. Keeping it low right underneath the light.

Weak Larry side.

Gridlock.

Northeast corner near Tri-meter getting hairy.

A sick day at home means another painting. Pretty cool, huh?

lordjin · Feb 14, 2012

DST said:
From my understanding PM is a disease that once it get in the plant is is just purely a fight to get it to stay away (nothing completely rids it from your plant). The people putting out OG cuts probably have had PM on their plants and this disease is passed through to the clones, so it is just waiting to rear it's ugly head....

That's probably true. But let's see how the sterile root zone plays out.

I'm making my Serilite tote live up to its name this time.

Larry OG vs. Tahoe OG in Dual Monster Plant System (2nd Scrog)

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member