I hate trimming thread!
medidedicated
Well-Known Member
medidedicated
Well-Known Member
Clockin out for the day. 10 wks full. Slight early chop just localized branches of white some hairs just a couple branches. Rest was 100% red haired.
Decent chop didnt take me for a spin was done enough and yielded more bud than the others. I might be losin the pheno, the rosin return will let me know. If its 12% instead of 15-18%.
Decent chop didnt take me for a spin was done enough and yielded more bud than the others. I might be losin the pheno, the rosin return will let me know. If its 12% instead of 15-18%.
Attachments
medidedicated
Well-Known Member
@Jjgrow420
Maybe youd be the one to ask since you turn so much of yours to extracts. You ever see such a large decline in return for no reason because its random or could a loss of a pheno be the culprit? Like 20% clones all the way down to 12%?
I was getting 20%, 19%, 17% then 15% now 12%. Used to always be 12% then hand trimming raised it to 20% but now its creepin its way down low as if I machine trimmed it. Which if I did Im pretty sure id get less than 12%. Theyre still just as frosty but lack hash in that frost.
Maybe youd be the one to ask since you turn so much of yours to extracts. You ever see such a large decline in return for no reason because its random or could a loss of a pheno be the culprit? Like 20% clones all the way down to 12%?
I was getting 20%, 19%, 17% then 15% now 12%. Used to always be 12% then hand trimming raised it to 20% but now its creepin its way down low as if I machine trimmed it. Which if I did Im pretty sure id get less than 12%. Theyre still just as frosty but lack hash in that frost.
Jjgrow420
Well-Known Member
Are you making rosin?
There's prob a lot of contributing factors that could make a lesser yield.... Id prob start with human error because that's the most likely culprit. There's so many steps involved from grow to press that really any variation within those parameters could and would return different results....
I really don't go as far as weighing and calculating anymore. I know if use x amount of bud I should get around x amount of said extract. If I get more or less what my avg tends to be I don't investigate any further. If it's way off low then I'll prob look at wtf I did wrong try another run and if same result then I start working backwards and try to figure out where I went wrong.
medidedicated
Well-Known Member
Yea flower rosin, everythings been as close to the same as possible up to now. Nothings turned my pucks into jelly doughnuts like hand trimming and upping the temps on the press. It even seems more potent and tasty.
Only things been different is I dry my bud horrendously but was going to dry some of it as normal as test that. Ive hit ok numbers since using box fan on each clone overhead and rh below 45%. So I dont think thats it.
I harvest the entire plant at once and press every bit of it and label my yield in % in that jar. Each clone gets its own jar. So I notice all kinds of differences between clones. Suddenly my flower rosin is black almost but besides that and struggling yield its ok. Ive yielded blonde rosin with box fan on it but was dried normal.
Now Im drying in flower room 80F and 35rh dries in 3-5 days. Before eould be 5-8days. I dont get why more time in acceptable enviorment vs less time in flash dry conditions would be culprit. Seems obvious at first but Ive had blonde rosin in all same conditions even in horrid dry conditions.
Hash doesnt just dissapear, now maybe before you can extract it but not a quater ounce lost out of an ounce difference. It grows in that enviorment, its just drying really quick in there too.
Man I wish it was all well known and if it is Id love to accept it and do whatever I have to but my grow is such a research lab. The way I cant get one to explain each thing I get conflicting results with. Its all I want, no smoking so if I dont get it I really lose out on it. So I track it pretty well. I know terps will be lost but a quater oz gone? Hand trimmed? Never agitated?
I appreciate the insight I was thinking I have to be the culprit and maybe am but will keep my focus on that direction. I was planning on running 6 new strains before end of this year hoping I just get something thats always clocking above 20%.
Only things been different is I dry my bud horrendously but was going to dry some of it as normal as test that. Ive hit ok numbers since using box fan on each clone overhead and rh below 45%. So I dont think thats it.
I harvest the entire plant at once and press every bit of it and label my yield in % in that jar. Each clone gets its own jar. So I notice all kinds of differences between clones. Suddenly my flower rosin is black almost but besides that and struggling yield its ok. Ive yielded blonde rosin with box fan on it but was dried normal.
Now Im drying in flower room 80F and 35rh dries in 3-5 days. Before eould be 5-8days. I dont get why more time in acceptable enviorment vs less time in flash dry conditions would be culprit. Seems obvious at first but Ive had blonde rosin in all same conditions even in horrid dry conditions.
Hash doesnt just dissapear, now maybe before you can extract it but not a quater ounce lost out of an ounce difference. It grows in that enviorment, its just drying really quick in there too.
Man I wish it was all well known and if it is Id love to accept it and do whatever I have to but my grow is such a research lab. The way I cant get one to explain each thing I get conflicting results with. Its all I want, no smoking so if I dont get it I really lose out on it. So I track it pretty well. I know terps will be lost but a quater oz gone? Hand trimmed? Never agitated?
I appreciate the insight I was thinking I have to be the culprit and maybe am but will keep my focus on that direction. I was planning on running 6 new strains before end of this year hoping I just get something thats always clocking above 20%.
Jjgrow420
Well-Known Member
Ya I duno man. It you dry poorly you get oxidizing which turns your products dark. Dry is Just as important as growing. I do everything I can to dry in an ideal environment.
medidedicated
Well-Known Member
medidedicated
Well-Known Member
This eighth clocked in at 19.1% so my horrendous drying lost me at least 2%. I lost 6 gs off a 36g flower rosin clone. Thanks for your input I should of listened sooner. Thing is, it might lose taste and looks but after a month or two it just aint as tart is the best word I can think of.
I have no dry space but quickly thought of solutions. If I only used a short amount of space Il need to wait like a week or up to three waiting for that full dry tent. Causing the same issues as it sits overly ripe in these crazy conditions.
Will just build my own shelving very tight spacing to fit as much bud possible. Something breathable. These 6 tier 2x2 dry herb shelfs are too big shelf spacing only can fit like 14oz and thats with buds overlapping denugged.
I gots to, Im all about yield AND it makes it look beutiful? Still pressing 220F and look at that honey money lol. Thanks jjgrow420 you helped me find my next oo la la moment.
I have no dry space but quickly thought of solutions. If I only used a short amount of space Il need to wait like a week or up to three waiting for that full dry tent. Causing the same issues as it sits overly ripe in these crazy conditions.
Will just build my own shelving very tight spacing to fit as much bud possible. Something breathable. These 6 tier 2x2 dry herb shelfs are too big shelf spacing only can fit like 14oz and thats with buds overlapping denugged.
I gots to, Im all about yield AND it makes it look beutiful? Still pressing 220F and look at that honey money lol. Thanks jjgrow420 you helped me find my next oo la la moment.
Attachments
medidedicated
Well-Known Member
Thats just crazy, yall saw me doubt it could take yield drying it that way. “Hash doesnt just dissapear.” Literally, if I leave a jar of hash uncapped in that enviorment and weigh it before and after a couple weeks, would I lose hash? Why not? Why was it subject to dissapearing with just those factors..
Swiller
Well-Known Member
I haven’t done rosin, so I may be totally off here…..but, it seems to me it would be easier to extract when it was a higher humidity, oils dry as well, and become much harder to remove/extract. I only do BHO, but am very interested in the rosin. Thanks for the posts, love reading and learning. Peace
medidedicated
Well-Known Member
I havent done it in a while the normal way, they were super brittle. After 2-3 days but if you press it can still have water in the stem even tho it snaps. So Id wait another day or so and do a test press, if the dab pops and cracks its got water and needs more time. Not much tho as its hot and dry drying conditions. Windy.
But now its back to how I remember. The dab test doesnt matter much if you just wait the extra day but now I have to. Because the bud is spongy and stems some fold vs snap. So I guess the 60/60 keeps it in tact.
The rosin was just flowing it squished like a jelly doughnut. See thru slightly blonde. You can see thru the rosin as its balled up off of the parchment its like raw honey. Looks aint nothing to ke but it just so happens to have high appeal as a bonus but its important I guess.
It really does steal yield. I wasnt a believer in the rh bag testing the bud because its always like 52rh or lower and still does great. I didnt believe it could lock up in the material till I used a brick of bud the size of the plates.
Then I started considering it. Perhaps if theres no where to go and lack of heat from the oversized brick of bud, it can? I used to try to press at 64rh like it says everywhere to but thats not ever increase my yield. I think its exposure to air and temp, even 60/60 can shorten yield if u let it sit too long?
Maybe indeed a jar of rosin uncapped can lose terps obviously but worst yet could weigh less. Or its like honey in the sense that once its in that form its locked in.. Idk. Id think this applies to bho too if doing dried bud.
But now its back to how I remember. The dab test doesnt matter much if you just wait the extra day but now I have to. Because the bud is spongy and stems some fold vs snap. So I guess the 60/60 keeps it in tact.
The rosin was just flowing it squished like a jelly doughnut. See thru slightly blonde. You can see thru the rosin as its balled up off of the parchment its like raw honey. Looks aint nothing to ke but it just so happens to have high appeal as a bonus but its important I guess.
It really does steal yield. I wasnt a believer in the rh bag testing the bud because its always like 52rh or lower and still does great. I didnt believe it could lock up in the material till I used a brick of bud the size of the plates.
Then I started considering it. Perhaps if theres no where to go and lack of heat from the oversized brick of bud, it can? I used to try to press at 64rh like it says everywhere to but thats not ever increase my yield. I think its exposure to air and temp, even 60/60 can shorten yield if u let it sit too long?
Maybe indeed a jar of rosin uncapped can lose terps obviously but worst yet could weigh less. Or its like honey in the sense that once its in that form its locked in.. Idk. Id think this applies to bho too if doing dried bud.
medidedicated
Well-Known Member
Man my notes are stoney and everywhere lol. Should add I dried about sometimes 3 days 4 days but been needing 4-5 days lately. The batch I set aside from the same literal cut only took 6 days in like 65F 60rh. Important details in my study even tho I didnt closely monitor those are rough readings in meter in tent near by.
Anyway so conclusion if working with dried bud flower rosin or dried bho Id do it asap. It will look super blonde even tho it was low rh and boxfan overhead the plant led on max lowered. 10wks flower. 85F. As yield can be lost the longer it sits there, its possible. Hand trimming and no agitation till extracting.
Hash is hash I know flower rosin isnt bho but we are extracting the same thing. At the very least I can speak for flower rosin. My bud tends to press when its ready and rarly above 55rh and still do great. Its a matter of time drying Id dry as slow as possible 6-8 days idk what happens if left longer. It cant be good tho idk do what you will with all this.
Anyway so conclusion if working with dried bud flower rosin or dried bho Id do it asap. It will look super blonde even tho it was low rh and boxfan overhead the plant led on max lowered. 10wks flower. 85F. As yield can be lost the longer it sits there, its possible. Hand trimming and no agitation till extracting.
Hash is hash I know flower rosin isnt bho but we are extracting the same thing. At the very least I can speak for flower rosin. My bud tends to press when its ready and rarly above 55rh and still do great. Its a matter of time drying Id dry as slow as possible 6-8 days idk what happens if left longer. It cant be good tho idk do what you will with all this.
medidedicated
Well-Known Member
Idk why youd do dried bho other than you just have dried bud to get rid of. If I did bho id tooootally do live resin, why not. It was discovered in accident trying to consume dabs faster. All they did was freeze it and process it. Youd get everything Im talking about I guess purposely losing but Im a basic guy and it fits my basic needs.
We already talked about why earlier, while it seems safe its really the privacy for me. We got nosy neighbors and hell to the no I cant process a couple pounds of butane hash oil in the open. Even if we put up fences the home owners are not going to be talked into letting me do that. They notice and question everything and this wont fly.
We argued when my portable ac showed up like why the F do you need that. They just dont know that I already needed it when I had one tent. The leds run hot on ground floors for me. Maybe if I had my own place in the country ish area.
We already talked about why earlier, while it seems safe its really the privacy for me. We got nosy neighbors and hell to the no I cant process a couple pounds of butane hash oil in the open. Even if we put up fences the home owners are not going to be talked into letting me do that. They notice and question everything and this wont fly.
We argued when my portable ac showed up like why the F do you need that. They just dont know that I already needed it when I had one tent. The leds run hot on ground floors for me. Maybe if I had my own place in the country ish area.
medidedicated
Well-Known Member
The only thing I dont like about bho is it leaves a rediculous amount of reclaim in lungs and teeth. Not all of them did that it tended to be the high thc ones. The 50-60% thc ones I just got the same brand till they ran out and got more. It didnt do that and just seemed more natural.
Idk if any of yall could explain why a lot of them did that from the dispensary. It was best quality it could be too its not one of those states that thats a problem. Its like cali or colorado in that sense after a while.
Aside from coming a long way with flower rosin I might as well keep it up but bho would be faster. I spend like 6 hrs labor processing a 7 oz clone dried bud to jarred rosin. I cant imagine where Id be if I kept investing in what I do tho. 30% yielding phenos.
Idk if any of yall could explain why a lot of them did that from the dispensary. It was best quality it could be too its not one of those states that thats a problem. Its like cali or colorado in that sense after a while.
Aside from coming a long way with flower rosin I might as well keep it up but bho would be faster. I spend like 6 hrs labor processing a 7 oz clone dried bud to jarred rosin. I cant imagine where Id be if I kept investing in what I do tho. 30% yielding phenos.
medidedicated
Well-Known Member
Lol so I asked them anyway just out of curiousity and was right. They are too worried about safety but even if I could talk them into it, its not legal in my state. Wtf lol, never saw that in the bill we passed. So yea hell to the naw.
Similar threads
