Hash and Oil Picture Thread

[MircalGrow]

ANd no shiznit I can even use stems hu? Awesome as I don't want to waste anything. : )

 

[WarMachine]

ANd no shiznit I can even use stems hu? Awesome as I don't want to waste anything. : )

Yup you can and it actually comes out pretty decent. I have probably almost two Oz of Stems I'll be making into oil soon. You don't have to split the material (nug, shake, stem) but I do just to see what I get from each.

 

[WarMachine]

War in a in 2 weeks I will be chopping, so If i am going to do a run of qucikwash with ISO 91% my (first time.) I have read very little about the process is there a link yall guys can hook me up with or give me a step by step with items that make it easier.

1.Dry trim frozen, fresh is ready to go?
2.mason jar
3.Iso
4. mix equal part of Iso and Leaf, popcorn ground up nice and neat
5. Filter out the shake, while pouring into a Pyrex bowl
6.This is were I am lost I think? Let dry or do I want to cook off the remaining water at a very low temp to keep from degrading Trichs? And then allow to cure?

Any help would be greatly appreciated. I am ready for my first harvest, and to get to experiment some. SUPER PUMPED even though I may kinda fuck something up, but its all in the name of science! Lol

Yeah man of course I can help ya. l i'm at work but when i'm home I'll post you links and such.I would try to explain the steps but It's kinda hard with a phone lol.

 

[Twitch]

jack herer, the tribute strain after his death
puts out like a fat chick on prom, in the grow room and in the blast room


i have been playing around with the purge time and i am not letting it get crumbly wax, but it still has the wax consistency, its not sap or shatter and its not under purged
its perfect in my book... besides winterizing... i think this is what we have been looking for as far as not boiling off the thc but making sure all the butane is purged out completely

40 grams off trim

 

[Guzias1]

I JUST ran some xj-13. And it was all primo trim. Looks EXACTLY the same.

I like how you got the nice glob purge. While at work. Mine ran, and waxed up on me before I could refold my glob..

Muffin
Melt down at 120f. Purged @ 29.5 hg.
Every 2 hours or so , I folded my oil back into ball..and re purged at 120

Did that about 4 times last night

Before work today. I.bumped up heat to about 133f. 9.hours later..wax!

Now, the beautiful stats..

358 sugar in
51 wax out.

Mmmmm. Something like 14.2%!!! Only 9 Cans in..

okayy okayy. not exactly the same color.the shatter before wax looked pretty damn near that orange yellow color though..

 

[Guzias1]

im gonna try and make this a bit nicer..

 

[WarMachine]

War in a in 2 weeks I will be chopping, so If i am going to do a run of qucikwash with ISO 91% my (first time.) I have read very little about the process is there a link yall guys can hook me up with or give me a step by step with items that make it easier.

1.Dry trim frozen, fresh is ready to go?
2.mason jar
3.Iso
4. mix equal part of Iso and Leaf, popcorn ground up nice and neat
5. Filter out the shake, while pouring into a Pyrex bowl
6.This is were I am lost I think? Let dry or do I want to cook off the remaining water at a very low temp to keep from degrading Trichs? And then allow to cure?

Any help would be greatly appreciated. I am ready for my first harvest, and to get to experiment some. SUPER PUMPED even though I may kinda fuck something up, but its all in the name of science! Lol

Ok now that I am home. So you basically want your material and your ISO to be as cold as possible, to do so you just put them into the freezer for 24-48 hours, the longer the better. You want the material in a mason in jar while it is in the freezer. After the freezer stage, you fill the mason jar with ISO until it is roughly an inch above the material. I very gently agitate the mixture for 20-30 seconds, the shorter the time the cleaner the product, the longer the time, the more green matter you will strip. You then want to pour the mixture into a screen, one for pasta or tea for example so the ISO drains quickly away from the material. You then afterwards take the liquid and pour it threw a coffee filter which will then drip into your Pyrex dish. The drying process is rather easy, you just let it air dry. You can place a fan near by to speed up the process. You CAN apply heat to speed up the process, I do NOT. I only use the fan to let it air dry. Once the ISO is gone, I then place it in a pan of boiled water for 30-60 mins depending on how much I made. Some say you do not need to heat it at all, but I do just in case. Some really good links are these two :

http://skunkpharmresearch.com/qwiso/
https://www.rollitup.org/concentrates-extracts/489366-iso-extractions-_oakley_.html

If you have more questions just let me know!

 

[Twitch]

that is a single blast too.. i did not re blast, i still have material that is coated will the oil and is sticky sitting in the freezer
i am going out of town and cant finish blasting is all till next week

 

[Twitch]

I JUST ran some xj-13. And it was all primo trim. Looks EXACTLY the same.

I like how you got the nice glob purge. While at work. Mine ran, and waxed up on me before I could refold my glob..

Muffin
Melt down at 120f. Purged @ 29.5 hg.
Every 2 hours or so , I folded my oil back into ball..and re purged at 120

Did that about 4 times last night

Before work today. I.bumped up heat to about 133f. 9.hours later..wax!

Now, the beautiful stats..

358 sugar in
51 wax out.

Mmmmm. Something like 14.2%!!! Only 9 Cans in..

okayy okayy. not exactly the same color.the shatter before wax looked pretty damn near that orange yellow color though..

that is a good color for trim pro trim

for real props its hard to not get green hue with the trim pro trim its has been mutilated

 

[Guzias1]

it was from primo trim, aka, sugar leaf right from the trimmers..

no trim pro was used.. i do notice when i grind herb with moisture content that is too high.. i get a greener hue.. i think its best to grind material thats pretty damn dry. (fresh, and dry) yeeeeee

trim from trimmers is pretty sweet.

 

[WarMachine]

A few close ups, I'll try to get better at taking pictures

 

[Twitch]

it was from primo trim, aka, sugar leaf right from the trimmers..

no trim pro was used.. i do notice when i grind herb with moisture content that is too high.. i get a greener hue.. i think its best to grind material thats pretty damn dry. (fresh, and dry) yeeeeee

trim from trimmers is pretty sweet.

haha my high ass mis-reading again

 

[doubletake]

I've got some trim that's slightly wet like just not crisp yet
what do you guys think just wait another day and blast it so it's completly dry or so you think
i can get freezing and blasting today?

 

[Guzias1]

It's saypor you're material in a paper bag. Put that paper bag in a place with great ventilation. Try and get all that moisture out.

 

[Metasynth]

 

[sfcc892007]

Some well cured starting material. No strong smell but very smooth.

 

[BluJayz]

Three washes in order Sour G X Critical Kush.


All three smell and taste like the flower!

 

[vacpurge]

holy shit how big of washes?? looks like a lot of work just for 4 dabs each on that first and 2nd blade

 

[BluJayz]

holy shit how big of washes?? looks like a lot of work just for 4 dabs each on that first and 2nd blade

Allot of work? lol Its equal difficulty to making baked macaroni and cheese.

10 grams gave 2 grams between the 3 washes. .25 & .85 & .95.

I wanted to try some other methods. It was 30s, 3m, 30m.

It has not been polished.

 

[vacpurge]

2 grams is a pretty solid return.

thats an ISO wash??

3 seperate tiny runs like that... when I do everclear runs its kind a lot of fuckin around, I dont do them often and am not very set up to do it... but BHO. I can turn bud into oil in like 3 minutes.