Harvest a Pound Every Three Weeks!

mindphuk

mindphuk

Well-Known Member
latinrascal said:
You can try a Vaporizer. I often have sever nausea and both smoking and vaping take care of the situation. Plus in my opinion the smell is very faint and you can even bake using the lightly browned meds (I tried to use some that was vap'd with to high a temp which made the brownies taste awful and were very weak)
Click to expand...
I know from experience that sometimes when a chemo patient can't eat, they can sometimes tolerate fluids, especially if it's a small amount. You can make Bhang very easily and one of my new favorite ways of ingesting. There are some authentic Indian recipes all over including our own https://www.rollitup.org/cooking-cannabis/ section but all I do is put some hash into hot milk, add flavoring (tons of choices in the coffee section of the store as well as hot chocolate) and drink. If you don't have hash, you will have to chop/mash the trimmings into the as you cook it and strain it with cheesecloth. I just use the steaming wand on my espresso machine and it's done in less than a minute. Anyone that doesn't drink coffee and have an espresso machine and likes to drink this, it is worth buying a stand alone milk steamer, they're cheaper than a full espresso machine.

I like coffee and I often will make a cannabis cappucino. Anyone that hasn't tried this is missing out. :blsmoke:
 
Amoeba

Amoeba

Well-Known Member



What would be the smallest res that you could use for this system? I only have 43 inches from floor to ceiling and really love this design.
Currently working with OG Kush clones in coco and love the results but I'm itching to make the move over to hydro. Should I look at other options for hydro instead of aero? My issue is the draining back into the res and due to height issues I'm limited.

Opinions?
 
mindphuk

mindphuk

Well-Known Member
GringoLoco said:
I'm planning on moving my garden to a roomier location (12' x 12') in the near future and in planning for lighting I am considering acquiring a 9ft light mover to place in the middle of the room and a horizontal bar to place (2) 600w lights over (2) rows of SB flowering units; my question is this:

Any Stink Buddies using light movers, and if so, which model? how many watts? using multiple lamps? Prefer/Not Prefer over standard static lighting?

Any feedback would be greatly appreciated as this is something I have not found much information on while researching online. Also, heat won't be a concern, so I don't plan on running fans and exhaust ducts which hopefully should make implementation much simpler.

TIA!
Click to expand...
Even if heat won't be an issue, humidity might and you should still use exhaust fans to help control that. Remember, you also need the exhaust to bring the fresh air in during the CO2 downtime.
 
whysohigh

whysohigh

Well-Known Member
Amoeba said:



What would be the smallest res that you could use for this system? I only have 43 inches from floor to ceiling and really love this design.
Currently working with OG Kush clones in coco and love the results but I'm itching to make the move over to hydro. Should I look at other options for hydro instead of aero? My issue is the draining back into the res and due to height issues I'm limited.

Opinions?
Click to expand...
it depends on how often you want to add water, i have basically the same set up as stink (going to be exactly like his after this harvest) and i started out with a 5 gal bucket for a rez for 12 plants, i had to add a gallon or two of water a day. height is an issue for me also, i was going to look into using one of thoes rubbermaid totes they make for going under your bed, they are about 4 or 5 ft long and just high enough to submerse a pump. my only concern is stinkbud says everything else leaks, its going to be about 4 weeks untill i try it but ill post it.
 
mindphuk

mindphuk

Well-Known Member
Amoeba said:
What would be the smallest res that you could use for this system? I only have 43 inches from floor to ceiling and really love this design.
Currently working with OG Kush clones in coco and love the results but I'm itching to make the move over to hydro. Should I look at other options for hydro instead of aero? My issue is the draining back into the res and due to height issues I'm limited.

Opinions?
Click to expand...
Stink mentioned a 10 gal res can work with a downscaled version, 3 sites per post for 6 total. I'm not sure of the height size of the 10 gal container though. Another think you might consider is to put the clones directly to flower without a veg period to help control the size. You would have to either keep a mother plant though so it makes it a little different that Stink's overall setup, but the design of the flowering unit can be used with any pre-flower system.
[fuck, did that make sense? I'm stoned and just re-read it...]
 
Amoeba

Amoeba

Well-Known Member
5 Gallon buckets are too tall for me and my first choice was a very low but long rubbermaid container or something similar with maybe a fresh water res (trash can, bucket, etc..) to top off the res.

We are thinking along the same lines whysohigh!
 
Amoeba

Amoeba

Well-Known Member
mindphuk said:
Stink mentioned a 10 gal res can work with a downscaled version, 3 sites per post for 6 total. I'm not sure of the height size of the 10 gal container though. Another think you might consider is to put the clones directly to flower without a veg period to help control the size. You would have to either keep a mother plant though so it makes it a little different that Stink's overall setup, but the design of the flowering unit can be used with any pre-flower system.
[fuck, did that make sense? I'm stoned and just re-read it...]
Click to expand...

I have 10 feet of horizontal space, it's my height issues I'm more concerned about. I get what you're talking about, 6 plants is what I wanted to run per system, with running three individual systems running to optimize production just like stink and you guys. You guys make me jealous!
 
StinkBud

StinkBud

Well-Known Member
Amoeba said:
What would be the smallest res that you could use for this system? I only have 43 inches from floor to ceiling and really love this design.
Currently working with OG Kush clones in coco and love the results but I'm itching to make the move over to hydro. Should I look at other options for hydro instead of aero? My issue is the draining back into the res and due to height issues I'm limited.

Opinions?
Click to expand...
You can use any type of container with the flowering system. Just look for a short, wide and long one. Adjust the measurements accordingly.
 
robotninja

robotninja

Well-Known Member
Hey stink, or anyone for that matter, do you ever "Top" your plants? I imagine probably not since you have a short 3 week veg cycle and topping requires a longer veg time.

Well say you had a longer veg cycle (6+ weeks), wouldn't I pull more bud if I top em at week 3-4 in veg and allow a couple more weeks to recover? I'm contemplating taking the scissors and going for it. I can't run a true 3 week SB system because of my grow limitations.
 
StinkBud

StinkBud

Well-Known Member
whysohigh said:
stinkbud says everything else leaks, its going to be about 4 weeks untill i try it but ill post it.
Click to expand...
You only have to worry about leaking with the cloner and veg system because of the sprayers.

Any brand and size can be made to work with the flower unit. You just want the color dark so the light can't get through.
 
StinkBud

StinkBud

Well-Known Member
Amoeba said:
I have 10 feet of horizontal space, it's my height issues I'm more concerned about. I get what you're talking about, 6 plants is what I wanted to run per system, with running three individual systems running to optimize production just like stink and you guys. You guys make me jealous!
Click to expand...
Maybe something like my six-hole unit but with a shorter res.

Check out the photo. This res is only 10 gallons and works great with only 6 plants.

I pulled 12 oz. from my last 6-hole harvest! I vegged them for an extra month before I flowered them.
 

Attachments

GringoLoco

GringoLoco

Well-Known Member
mindphuk said:
Even if heat won't be an issue, humidity might and you should still use exhaust fans to help control that. Remember, you also need the exhaust to bring the fresh air in during the CO2 downtime.
Click to expand...
I meant I won't be cooling the reflector hoods with fans and ducting, the entire room will have in/out ventilation - I just don't plan on attaching the ducts to the moving hoods as this could present numerous issues.
 
GringoLoco

GringoLoco

Well-Known Member
Amoeba said:
What would be the smallest res that you could use for this system? I only have 43 inches from floor to ceiling and really love this design.
Currently working with OG Kush clones in coco and love the results but I'm itching to make the move over to hydro. Should I look at other options for hydro instead of aero? My issue is the draining back into the res and due to height issues I'm limited.

Opinions?
Click to expand...
Amoeba, Stifling has shared his version which might be a good example, here is one of his entries: Entry





 
mindphuk

mindphuk

Well-Known Member
StinkBud said:
Maybe something like my six-hole unit but with a shorter res.

Check out the photo. This res is only 10 gallons and works great with only 6 plants.

I pulled 12 oz. from my last 6-hole harvest! I vegged them for an extra month before I flowered them.
Click to expand...
Hey Stink. Do you think I could run two of these under a single 600w lamp so I can at least run your system on a 4.5 week schedule instead of once every 9 weeks or should I get a second lamp?
 
sparat1k

sparat1k

Well-Known Member
GringoLoco said:
I'm planning on moving my garden to a roomier location (12' x 12') in the near future and in planning for lighting I am considering acquiring a 9ft light mover to place in the middle of the room and a horizontal bar to place (2) 600w lights over (2) rows of SB flowering units; my question is this:

Any Stink Buddies using light movers, and if so, which model? how many watts? using multiple lamps? Prefer/Not Prefer over standard static lighting?

Any feedback would be greatly appreciated as this is something I have not found much information on while researching online. Also, heat won't be a concern, so I don't plan on running fans and exhaust ducts which hopefully should make implementation much simpler.

TIA!
Click to expand...
bump for GL's question
i'm considering doing a stationary, then later getting a light rail.
 
You must log in or register to reply here.
Top