First Time DMT

means alot comin from u man. thanx.

So I went onto the EBay to find the name of that seller for all of you and the SOB is no longer a registered user. Damn you thegalactictoad!

o well thanx for tryin Ichi.

just ordered my MHRB! I'm excited

nj12nets said:

just ordered my MHRB! I'm excited

Click to expand...

good luck with that. keep us updated.


see what u started ANC

Interesting. I should be doing this same thing hopefully within a few months.

hey guys...quick question I've read in some guides that hdpe plastic is suitable for MHRB preparation and that it is corrosive resistant...Has anyone tried using hdpe plastics (milk container, gatorade twist top bottle) I'm just curious as the less shit to buy the better IMO and a plastic milk carton and gatorade bottle for a science experiment is much easier to find. Just wanna make sure I ain gonna waste it...

I like useing lucozade bottles, they do have plastic tops, but it seems fine.
Not keen on useing solvents in plastics, even resistant ones.

A clear wine bottle with a propper "cork" cork is good too.

ive used naphtha to extract DXM in 2 liter soda bottles and ziplock bags. and i was fine. but i did take it as a pill. smoking something with plastic in it could be different.

from what I've been reading HDPE2 plastics are corrosive resistant and from reports on dmt-nexus people have said they're really reliable...found a tek using gallon milk jugs and one of those gatorade twist top bottles used upside down (w/ flat bottom cut off) as a speratory funnel...seemed to work really well in the tek I saw but I'll definitley let you know of my results when I get to this Science experiment.

I'm not doubting the reliability part, its just that soft plastics may leach estrogen like hormones...

understood, I was skeptical when I read about using plastics but on another forum I've read some good reviews...quick question ANC as you seem pretty experienced...do you freeze precip or sometmies do a regular evap? I don't have exclusive access to a -20 freezer and was planning on doing a regular evap of Naptha as long as my product wouldn't come out really bad or really dirty. any thoughts?

Regular avaping will leave you with a goo containing all the removed alkaloids, as oposed to mainly DMT, and not crystals...

Rather look into the xylene FASA teks (fumaric acid saturated acetone), needs no freezer, is a bit more work, but also yields more than the naphta.

Most freezers will do hey, just seal your evap bowl, use gladwrap and a rubber band if needed...

ok, I think I can do the freezer for like 8 hours I guess (i hope it would be enough) ...but what do I do put the jar in upside down so that any crystals that grow, grow on the lid and not on the bottom of a jar (making it hard to remove) ...trying to get all ducks in a row and info prior to experimentation.

Hey, the crystals cling to the bowl, and you can normaly roll the solvent away from the bigest pile and either pour it off (if you used an evap dish with a spout thingy), or just suck it off with a pipette or syringe, and pour the solvent back into your bottle of bark as it its not completely exhausted yet...

Work where its as cold as possible, or at the coldest time of day, as the naphta will start to reabsorb your xtals as the temp goes up, very fast, if you pour off the bulk what ever bit stays behind gets super saturated very fast.
You can then stick it bak in the fridge and let the last bits collect in a corner of the bowl before suckingpouring that off back into your bark again, leaving jsut the xtals behind.

Get one of those flat shaveing blades you screw in to a shaver, those cheap ones, nothing will scrape up xtals better.

Shit , i clicked the wrong button and lost my post...the xtals cling to the dish, just roll the naphta away from the bulk, mabe scrape some away with one of those cheap shaveing blades...
pour it off or suck it up with a syringe/ pipette and pour that naphta back in with your bark... work where its cold as the naphta's ability to absorb dmt depends on the temperature (which is how we got it to make the xtals).

Its pretty easy enough, once the bulk is poured out, set it vere it gets a bit of air moveing over to draft away condensation before it can get into your xtals (water in your DMT looks like oil that sinks)
Give the naphta a handfull of hours to evaporate... the xtals never go completely dry, they will always be a little pliable.

If you are realy anal you can look up how to do cold amonia washes to clean it up further.... I'm more scared of amonia than naphta...

Edit, ah fuckit there my post is now.

P.S. don't use more than 3 25ml pulls per sets or you will have to evaporate alot of naphta to get the needed saturation level before you start to freeze it. You want to evaporate off at least 1 rd probably more, before sticking it in the fridge, it will make a smokey look when you blow on it... when its ready to start cooling... if you get it saturated enough, you can be done well under 8 hours...

cool shit...as i'm prolly gonna do only 100g for the first I'd guess 25-50 ml naptha per pull should keep it nice and tidy?

Don't try to do 100g at a time, you can buy 100g but don't try to extract all in one go... the mix becomes too thick and makes it hard for layers to seperate.
I'd say aim for 30 to 40g per 750ml bottle... (even better than a bottle is a large seperatory funnel....

i have 1lb on the way ...ok so I'll try a 50g mixture the first time...its that naptha around me is sorta hard to found and pretty expensive...I wanted a gallon and then everywhere around me only has a quart and its like 7.50/qt and even though lowes says they sell gallon size for 12.50 no stores around me have it....I know a desired yield is about .6-1% so I want it to give me enough final product to make the $ invested in materials to be worth it you know...don't wanna get barelky anything out of it and have to do it all over again as money and time for processing is very limited. I was hoping to do it to get enough to last me awhile...

I also have this habit of trying something around the normal does to see how things are and then going hard....tried salvia the first time and only got mildly buzzed so from theno n went hard trying to suck down as much as possible and actually leave(mentally, even if its only 30 secs) like my gf did ...I actually set that as a goal but it permeated the trip so much one time I actually started thinking in her tone/inflection and demeanor...it was funny I recognized it right away but at least I don't think I heard her voice just my mentality was thinking in her manner of talking.

I was actually considering the sodium carboante wash(i heard you lose yields w/ ammonia but not SC) in case I got a gooey or wierd looking outcome...

I just wanna clarify you meant below that once you collect however many 25ml pulls (you combine em?) and then evap off at least one of those 25 ml pulls to bring the saturation of the naptha/dmt itself up to a level to make it easier to freeze...as you can tell I'm slightly nervous about fucking this up and if i mess it up the first time I will probably have to wait a week before starting all over again and I'm already impatient to get into hyperspace or at least o try this but a friends friend wanting $20 per hit(no mg amount told) is a bit excessive in my book

ANC said:

If you are realy anal you can look up how to do cold amonia washes to clean it up further.... I'm more scared of amonia than naphta...

Edit, ah fuckit there my post is now.

P.S. don't use more than 3 25ml pulls per sets or you will have to evaporate alot of naphta to get the needed saturation level before you start to freeze it. You want to evaporate off at least 1 rd probably more, before sticking it in the fridge, it will make a smokey look when you blow on it... when its ready to start cooling... if you get it saturated enough, you can be done well under 8 hours...

Click to expand...