I made a scrog net I use 1/2 in PVC I made it 3 1/2 ft all way around cuz my tent is 4ft x 4ft sobit fits nice but I made the legs which makes the height and it is 3ft so my plants will need to veg a good bit to reach the net .I usually veg 4 weeks then flip my question is Should I cut the legs down to 2ft I'm growing wwxbb 4 of them 6 purple wreck and 1 og kush 3 white widow 3 PW are still seedlings and I got 3 critical +and 2 diafem cheese all feminised let me know that you guys think I should do thanks
DIY SROG I MADE GOT ? FIRST TIME USING SCROG
- Thread starter chuckie86
- Start date
vostok
Well-Known Member
Looks Good ..imo/= I'd avoid growing different stains under the same net
as in most cases all strains exhibit different characters , like height and size
Should I cut the legs down to 2ft? .....Hold off for now
until the smallest is the size to reach the net,
but by then the fastest or tallest may well be a hassle to deal with
stay sharp
peace
as in most cases all strains exhibit different characters , like height and size
Should I cut the legs down to 2ft? .....Hold off for now
until the smallest is the size to reach the net,
but by then the fastest or tallest may well be a hassle to deal with
stay sharp
peace
licoricetree
Well-Known Member
I've be struggling with scrog fro 3 grows now. Kept the scrog net as high as you and it get tall plants every time. I have read in a few place cant remember where but apparently 6 to 12 inches from pot. So thats what i am going to try this time around.
Thc247
Well-Known Member
fair play that's a tidy bit of diy there mate i would actually buy me 4 of these if you sold them its ideal and looks very maneuverable i really want 4 of these each one to fit in 1mx1m space so all 4 wud fit in a 2mx2mx2m tent
$bkbbudz$
Well-Known Member
That's good shtuff! I am coming close to finishing my 1st Scrog now....I grew 2 different strains. Had an even canopy until flower...then 1 shot up well past the other. made things kinda rough.
IMHO....I think you may have too many plants for that area. Again...Just IMHO.
licoricetree
Well-Known Member
It is actually quite simple but one part is time consuming. Make the pvc fame you need measured out to your specific specs then here is the annoying part use self taping screws every 4in around the frame and take a store bought trelles and cut and stretch it to fit nice and snug.
Attachments
THC how many plants u do have under your net I usually keep my plants short so I'm hoping it will work out with the 10 plants the other plants I might just keep them on my grow table so I don't have to many under my net but I got good bit of room to grow till they hit the net
Thc247
Well-Known Member
16 mate 4 under each light i have since tightened the net up and been tucking the branches under as they grow through i will be adding more pics to my diary later or tomoro previosly i used the nets as support but this is the first time i decided to train then into the net and i can tell already its going to improve my results
vostok
Well-Known Member
Just got some LED replacement tubes for my T8 ....18 watts, 4 feet long, half the wattage of the flouros of 36w? and 2x brighter
in 50/50 cool and warm white
I'm wrapped ..lol
cheers
Thc247
Well-Known Member
600 w Hps x 4 and yes mate np il get sum pics later
Thc247
Well-Known Member
16 plants mate
Thc247
Well-Known Member
would you list all the parts needed to make this frame mate i got the netting but would apreciate a list of parts so i could order the parts and know i have all the bits
Which scrog you trying to build bro his or mine is kinda easy I used 2 in PVC or plastic pipe and a few t elbows his looks same way but on each corner of the first net u need the 4 ended t elbows so u can add ur 1 ft of a straight piece or what ever u wish to the next net then I think nu could get just the 3 piece t connector to each corner to get the square just need to measure the size u need it idk figured I'd give ya my 2 cents lol
Mine was easy I just used the 2 in plastic PVC measured 4 pieces to 3 1/2 then I put the t connectors then I just cut the PVC to the height its easy to make mine then for the net I used twin and I drilled holes every 5in and put the ? Mark screw things can think what they are called and ran twine threw each one
licoricetree
Well-Known Member
if i remember correctly just 1/2 in PVC piping ,elbows maybe tees if u wanna make a second layer and self tapping screws spaced 4 inches apart. used store bought netting and cut to size and stretched and wrapped netting around the self tapping screws.
GuyLeDuche
Well-Known Member
Yea I'm not sure about so many plants in a scrog, for me the goal is to use 1-4 plants to stretch out and fill the screen. If it were my tent I might keep the screen higher for this run to support the colas as they swell rather than lower to flatten the canopy.
Nice selection though, I'm running 3 different versions of the critical+ myself atm
The critical+ 2.0 I have in flower is filling out fast
She's only 27 days from the flip to 12/12 
.
Nice selection though, I'm running 3 different versions of the critical+ myself atm
The critical+ 2.0 I have in flower is filling out fast She's only 27 days from the flip to 12/12 .
