DIY SROG I MADE GOT ? FIRST TIME USING SCROG

I made a scrog net I use 1/2 in PVC I made it 3 1/2 ft all way around cuz my tent is 4ft x 4ft sobit fits nice but I made the legs which makes the height and it is 3ft so my plants will need to veg a good bit to reach the net .I usually veg 4 weeks then flip my question is Should I cut the legs down to 2ft I'm growing wwxbb 4 of them 6 purple wreck and 1 og kush 3 white widow 3 PW are still seedlings and I got 3 critical +and 2 diafem cheese all feminised let me know that you guys think I should do thanks

Looks Good ..imo/= I'd avoid growing different stains under the same net

as in most cases all strains exhibit different characters , like height and size

Should I cut the legs down to 2ft? .....Hold off for now

until the smallest is the size to reach the net,

but by then the fastest or tallest may well be a hassle to deal with

stay sharp

peace

Thanks Vostok my plants are usually 2 ft to 3ft in flower so I would have to veg these longer but I did start most of these plants at same time so I'm hopeing they stay some what of the same size and height well thanks for the info

I've be struggling with scrog fro 3 grows now. Kept the scrog net as high as you and it get tall plants every time. I have read in a few place cant remember where but apparently 6 to 12 inches from pot. So thats what i am going to try this time around.

licoricetree said:

I've be struggling with scrog fro 3 grows now. Kept the scrog net as high as you and it get tall plants every time. I have read in a few place cant remember where but apparently 6 to 12 inches from pot. So thats what i am going to try this time around.View attachment 3678275

Click to expand...

fair play that's a tidy bit of diy there mate i would actually buy me 4 of these if you sold them its ideal and looks very maneuverable i really want 4 of these each one to fit in 1mx1m space so all 4 wud fit in a 2mx2mx2m tent

vostok said:

Looks Good ..imo/= I'd avoid growing different stains under the same net

as in most cases all strains exhibit different characters , like height and size

Should I cut the legs down to 2ft? .....Hold off for now

until the smallest is the size to reach the net,

but by then the fastest or tallest may well be a hassle to deal with

stay sharp

peace

Click to expand...

That's good shtuff! I am coming close to finishing my 1st Scrog now....I grew 2 different strains. Had an even canopy until flower...then 1 shot up well past the other. made things kinda rough.

IMHO....I think you may have too many plants for that area. Again...Just IMHO.

It is actually quite simple but one part is time consuming. Make the pvc fame you need measured out to your specific specs then here is the annoying part use self taping screws every 4in around the frame and take a store bought trelles and cut and stretch it to fit nice and snug.

i aint a diy person mate and would just end up fooking it up sum how im going to take a pic of my scrog net and upload it and you will get what im saying about what my effort wud look like but i was serious about purchasing these if they was available like

here is my diy net

THC how many plants u do have under your net I usually keep my plants short so I'm hoping it will work out with the 10 plants the other plants I might just keep them on my grow table so I don't have to many under my net but I got good bit of room to grow till they hit the net

chuckie86 said:

THC how many plants u do have under your net I usually keep my plants short so I'm hoping it will work out with the 10 plants the other plants I might just keep them on my grow table so I don't have to many under my net but I got good bit of room to grow till they hit the net

Click to expand...

16 mate 4 under each light i have since tightened the net up and been tucking the branches under as they grow through i will be adding more pics to my diary later or tomoro previosly i used the nets as support but this is the first time i decided to train then into the net and i can tell already its going to improve my results

What lights are you using bro I use t5s they have work great for me so far I got a hps 400w but runs up the electric to much and the heat from them can u let me see your set up when u get a chance thanks

chuckie86 said:

What lights are you using bro I use t5s they have work great for me so far I got a hps 400w but runs up the electric to much and the heat from them can u let me see your set up when u get a chance thanks

Click to expand...

Just got some LED replacement tubes for my T8 ....18 watts, 4 feet long, half the wattage of the flouros of 36w? and 2x brighter

in 50/50 cool and warm white

I'm wrapped ..lol

cheers

chuckie86 said:

What lights are you using bro I use t5s they have work great for me so far I got a hps 400w but runs up the electric to much and the heat from them can u let me see your set up when u get a chance thanks

Click to expand...

600 w Hps x 4 and yes mate np il get sum pics later

chuckie86 said:

THC how many plants u do have under your net I usually keep my plants short so I'm hoping it will work out with the 10 plants the other plants I might just keep them on my grow table so I don't have to many under my net but I got good bit of room to grow till they hit the net

Click to expand...

16 plants mate

licoricetree said:

I've be struggling with scrog fro 3 grows now. Kept the scrog net as high as you and it get tall plants every time. I have read in a few place cant remember where but apparently 6 to 12 inches from pot. So thats what i am going to try this time around.View attachment 3678275

Click to expand...

would you list all the parts needed to make this frame mate i got the netting but would apreciate a list of parts so i could order the parts and know i have all the bits

Which scrog you trying to build bro his or mine is kinda easy I used 2 in PVC or plastic pipe and a few t elbows his looks same way but on each corner of the first net u need the 4 ended t elbows so u can add ur 1 ft of a straight piece or what ever u wish to the next net then I think nu could get just the 3 piece t connector to each corner to get the square just need to measure the size u need it idk figured I'd give ya my 2 cents lol

Mine was easy I just used the 2 in plastic PVC measured 4 pieces to 3 1/2 then I put the t connectors then I just cut the PVC to the height its easy to make mine then for the net I used twin and I drilled holes every 5in and put the ? Mark screw things can think what they are called and ran twine threw each one

Thc247 said:

would you list all the parts needed to make this frame mate i got the netting but would apreciate a list of parts so i could order the parts and know i have all the bits

Click to expand...

if i remember correctly just 1/2 in PVC piping ,elbows maybe tees if u wanna make a second layer and self tapping screws spaced 4 inches apart. used store bought netting and cut to size and stretched and wrapped netting around the self tapping screws.

Yea I'm not sure about so many plants in a scrog, for me the goal is to use 1-4 plants to stretch out and fill the screen. If it were my tent I might keep the screen higher for this run to support the colas as they swell rather than lower to flatten the canopy.

Nice selection though, I'm running 3 different versions of the critical+ myself atm The critical+ 2.0 I have in flower is filling out fast She's only 27 days from the flip to 12/12 .