DIY: Deep Water Culture System

Askelluk

Askelluk

Well-Known Member
Here is my guide to the system i use for growing my plants and it cost under £50, hope you like it. Btw im new to all of this and this is my first attempt at making Hydro systems :)

This system cost me £47.67 - Here are the items i used :)

- Elite Complete Aeration Set (£23.99)
- Delta Therm Aquarium Heater (£14.99)
- 6 x Pond Plant Pots (2.99)
- 4 x 4 Inch Pots (0.60)
- 10 Litre Container (5.00)
- Knife/Sissors (Around The House)
- Marker (0.10)
 

Attachments

  • Equip 1.jpg
    Equip 1.jpg
    56.3 KB · Views: 506
  • Image004.jpg
    Image004.jpg
    63.4 KB · Views: 355
  • Image005.jpg
    Image005.jpg
    59.4 KB · Views: 382
  • Image006.jpg
    Image006.jpg
    49.2 KB · Views: 429
Then what i did was trased around 4 of the pots onto the plastic making 4 circular rings. Then cut out the area's i just trased making 4 holes, then cut a sheet of paper to fit around the circular lid (you can use anything you want, i used the paper because it was the only thing i had at the time you might want to use Mylar or Silver Tape), i placed the 4 pond plant pots into the lip with the paper sheet, i then punched 3 holes in the lid 2 for the air flow pipes and one for the heater to sit in the water.
 

Attachments

  • 4.jpg
    4.jpg
    42.2 KB · Views: 217
  • 3.jpg
    3.jpg
    42.9 KB · Views: 154
  • 2.jpg
    2.jpg
    43.2 KB · Views: 139
  • 1.jpg
    1.jpg
    41.4 KB · Views: 163
here is my finished design, its nothing special.
 

Attachments

  • Final.jpg
    Final.jpg
    59.9 KB · Views: 415
  • Final 1.5.jpg
    Final 1.5.jpg
    34 KB · Views: 557
  • Final 2.jpg
    Final 2.jpg
    40.8 KB · Views: 462
The plants are suspended over nutrient rich water, it oxygenises the plants making them grow fast and more healthy.
 
Hey man things are looking good, only piece of advice would be to cover up all the clear parts of the container. The light will cause algae to grow and some other issues. Light proof duct tape or spray paint will do the trick.
 
Don't use spray paint. I heard it lets light leak through even though it may not seem like it. Use this stuff called Plasti-Dip. It's thick. The part I didn't get was why'd you buy pots if your not using em? haha.
 
What about the heater? I'm thinking about adding one to my system which is in a 10 gallon plastic container. Do you think it will burn the plastic being attached to the side?
 
yea, its just like a fish tank heater. they can't get to hot or they will burn the fish :? and no one wants cooked fish in their aquarium.


i see you used clones? how would i start from a seed. would i have to use rockwool or would it be easier to transplant the plant from a pot to the dwc later
 
I have one (heater) in my twin mother CFL speaker box, it works great, does not burn the roots or the plastic.
 
You must log in or register to reply here.

Similar threads

Komodoghost
DWC made easy
2
Replies
36
Views
8K
Komodoghost
Komodoghost
fire_it_up
I'm looking for any help or advice on building a simple deep water culture system for my patio plant
Replies
4
Views
713
fire_it_up
fire_it_up
Dannbo
Hybrid High-pressure aeroponics and nutrient film table critique
Replies
1
Views
988
sunni
sunni
||||||l||||||l||||||
DIY Hydroponics Bottle Garden (reprinted article)
Replies
3
Views
2K
daillman
daillman
malignant
  • Sticky
Veganics Cheat sheet
2 3 4
Replies
73
Views
62K
Irrelevanttwat
I
Back
Top