So I am getting back into the swing of things after a long hiatus.
I am going to commercialize some therapeuti cannabis products and here is what I am thinking. I want to hear some feedback on these 3 products I had in mind.
First thing: I am extracting hash/oils from the buds and throwing the plant matter away. Reason is where I live you cannot sell the plant/flower for smoking as it is considered unhealthy to smoke amd you need to sell either an edible or an extract to vaporize. With this info, heres the master plan.
Method of extraction: fresh cut buds are frozen then use bubble bag technique wih ice water . I am not drying the buds prior to doing he extract - so this is question # 1- should I dry and cure or is fresh the way to go?
From the extract I saw on another forum where you take 500ML coconut oil chilled to 34 degrees F+ 125ML of the extract. Put into a lab beaker the coconut oil and half the extract. Mix at 2500 rpms with a lab homogenizer for 3 mins - raise to 8,000 rpms for 1 min - stop - add remaining extract - repeat mix sequence. At this point the oil should be slightly above toom temp and have a nice viscosity to it. This gets passed trough a vacuum filter and you end up with a pretty yellow oil suitable for consumption as is or can be used in cooking.
This is CannaCoco Raw. 5cc dropper bottle presentations.
What do you think of this product? I havent done it yet and Ill have to get the cbd/thc tests to get some sort of quality control metrics in there.
Then there's CannaCoco Decarb.
Same recipe only you place the extract onto a magnetic mixer/ hotplate combo.
Heat up to decarb temp and mix at 400 rpms. Should heat up around 8 mins. This will decarb the canna oils but might affect the taste of the coconut oil. Will update when finally get test done
What do you think of this one?
These are the two edibles Ill go with to start.
A third oral oil bethod of delivery will involve coconut oil and coffee concentrate mix. A raw variation as well as a decarb line
The fourth which is the most ambitious features a coconutoil/fishoil/honey/lemonzest/mint and cannabis recipe. This would only be raw variety and would have less extract per se and would be the closest to a true medicine I would have available.
All of these are tincture type extracts meant to either be taken orally.
Then Ill delve into the e-juice preparation
My idea is to use a 1/10/10 extract/PG/VG mix. Take the extract and usig the homogenizer whip it at 8500 rpms for 4-5 mins. With the solvents. Put into hotplate and mix at 1,000 rpms while he thing simmers for at least 3 hours.
Pass this through vacuum filters
Sell this as a Ejuice alternative.
Will this work?? Does it even qualify as ejuice?
.from wht I understand ejuice has a bit of water which is what actualky evaporates and 'carries' the pg/vg/nicotene.
Getting the vape recipe correct is going to be harder. I have one person that swears by just putting buds into a crockpot with a liter of VG for 8 hours makes amazig ejuice.
I want to use a PG/VG mix
.
Let me know whatyou think of this I still dont have a single plant on the ground so you are literally catching this as it begins.
I am going to commercialize some therapeuti cannabis products and here is what I am thinking. I want to hear some feedback on these 3 products I had in mind.
First thing: I am extracting hash/oils from the buds and throwing the plant matter away. Reason is where I live you cannot sell the plant/flower for smoking as it is considered unhealthy to smoke amd you need to sell either an edible or an extract to vaporize. With this info, heres the master plan.
Method of extraction: fresh cut buds are frozen then use bubble bag technique wih ice water . I am not drying the buds prior to doing he extract - so this is question # 1- should I dry and cure or is fresh the way to go?
From the extract I saw on another forum where you take 500ML coconut oil chilled to 34 degrees F+ 125ML of the extract. Put into a lab beaker the coconut oil and half the extract. Mix at 2500 rpms with a lab homogenizer for 3 mins - raise to 8,000 rpms for 1 min - stop - add remaining extract - repeat mix sequence. At this point the oil should be slightly above toom temp and have a nice viscosity to it. This gets passed trough a vacuum filter and you end up with a pretty yellow oil suitable for consumption as is or can be used in cooking.
This is CannaCoco Raw. 5cc dropper bottle presentations.
What do you think of this product? I havent done it yet and Ill have to get the cbd/thc tests to get some sort of quality control metrics in there.
Then there's CannaCoco Decarb.
Same recipe only you place the extract onto a magnetic mixer/ hotplate combo.
Heat up to decarb temp and mix at 400 rpms. Should heat up around 8 mins. This will decarb the canna oils but might affect the taste of the coconut oil. Will update when finally get test done
What do you think of this one?
These are the two edibles Ill go with to start.
A third oral oil bethod of delivery will involve coconut oil and coffee concentrate mix. A raw variation as well as a decarb line
The fourth which is the most ambitious features a coconutoil/fishoil/honey/lemonzest/mint and cannabis recipe. This would only be raw variety and would have less extract per se and would be the closest to a true medicine I would have available.
All of these are tincture type extracts meant to either be taken orally.
Then Ill delve into the e-juice preparation
My idea is to use a 1/10/10 extract/PG/VG mix. Take the extract and usig the homogenizer whip it at 8500 rpms for 4-5 mins. With the solvents. Put into hotplate and mix at 1,000 rpms while he thing simmers for at least 3 hours.
Pass this through vacuum filters
Sell this as a Ejuice alternative.
Will this work?? Does it even qualify as ejuice?
.from wht I understand ejuice has a bit of water which is what actualky evaporates and 'carries' the pg/vg/nicotene.
Getting the vape recipe correct is going to be harder. I have one person that swears by just putting buds into a crockpot with a liter of VG for 8 hours makes amazig ejuice.
I want to use a PG/VG mix
.
Let me know whatyou think of this I still dont have a single plant on the ground so you are literally catching this as it begins.
