This will be a fairly long processes to get finished, however I would really appreciate any advise that can be given. So here is my first step in the process, I bought a simple expanding screen from(lowes, home dePOT) it was roughly $10.00. I completely disassembled it.
![S4200379.jpg](/data/attachments/790/790076-a74722c39eec4977789989b41aa8b0bf.jpg)
Step1: Using a knife or flat head screw driver pry away(carefully) the rubber hose/place holder for the screen as seen here
Step 2: Getting just enough of the rubber holder of the screen you should be able to pull it away fairly easily without destroying the screen
![S4200381.jpg](/data/attachments/790/790077-1071f2ac54e55ca50a9198093d1d2c5e.jpg)
Step 4: By now you should be able to remove the whole screen from the assembly
![](https://www.rollitup.org/attachments/do-yourself/1078465d1280815906t-buildng-cure-box-s4200382.jpg)
Step 3: From here if you picked up the same one I did the ends come apart since they were never glued to gether it should be easy to pull apart. I made a small mistake by breaking a corner piece which i won't worry to much about
Step 4: (is under construction) Plan is to make shelving inside the drawer using the screens. This may take a bit. I have been using a hygrometer to see the highs and lows of the temp inside this drawer as well as the humidity it's been a stable 82-88 degree's (88MPH...oh sorry not back to the future) humidity has ranged from 35% to 43% I picked this hygrometer from Walmart for $8.00 it has served me very well I use one for flower and one in veg. It also tells you the current temp and current humidity.