AN to Remo

Discussion in 'Hydroponics / Aeroponics' started by hempisphere, Dec 2, 2018.

  1.  
    hempisphere

    hempisphere Member

    Im finishing current flowering with the regiment I started (AN) but for next runs im switching to the Remo lineup.
    Thoughts? Who has made the switch? Also, will I have to monitor my pH more than I have been with the AN pH perfect recipee? I used to check pH lots, but with AN I've noticed it is as promised, always right on. Can I expect the same with Remo?
     
  2.  
    shawnery

    shawnery Well-Known Member

    Not the question but can I suggest moving to much cheaper dry nutes. I've moved over to Masterblend but there is tons of info on jacks professional hydro nutes.
     
    Major Blazer likes this.
  3.  
    CikaBika

    CikaBika Well-Known Member

    you have to adjust ph with Remo
     
    hempisphere likes this.
  4.  
    hempisphere

    hempisphere Member

    Ty.
    Does it seem to stay stable once you've hit it? I guess that has a lot to do with res size.
     
  5.  
    CikaBika

    CikaBika Well-Known Member

    Doesnt that depents on whit what you lower ph?? I'm assuming you grow hydro, and I'm talking about soil.. Let Somebody smarter chip in..
     
  6.  
    shawnery

    shawnery Well-Known Member

    I don't use remo but unless it states it stabilizes ph it most likely doesn't.
     
  7.  
    myke

    myke Well-Known Member

    I’m new so take it as you will. Having ph stabilizers in the mix will hide potential problems at least that’s my take.ph tells you what’s going on. Spending extra $ to have stablizers is just a waste imo. Plenty of brands out there that are reasonable in price. You add ph down to your top up water then let it sit for 24 hrs.
    Just my thoughts.
     
    hempisphere likes this.
  8.  
    shawnery

    shawnery Well-Known Member

    I agree! Yiu should allow your solution to start at 5.8 and work it's way up to 6.2 and then start again.
     
    hempisphere likes this.
  9.  
    hempisphere

    hempisphere Member

    Thanks guys, Remo is on order. I've wanted to try it for a while and now is the time.
    Anyone got pics of a Remo crop?
     
  10.  
    hempisphere

    hempisphere Member

  11.  
    shawnery

    shawnery Well-Known Member

    Interested in hearing the results considering the price tag for this stuff. I thought AN was pricey and this stuff knocks that price out of the ballpark.

    Good luck!
     
    hempisphere likes this.
  12.  
    hempisphere

    hempisphere Member

    Week 2 flower with the new Remo nutes. I've mixed according to the schedule with zero deviation. RDWC
    I like it so far, but I look forward to the end to really know...
     

    Attached Files:

  13.  
    foliage2018

    foliage2018 Active Member

    I have a Q to ANs you had before. Did you have 3part nutes? At what PH did AN stabilize? When I mix mine 3part with RO, it stabilizes at 5,3.
     
  14.  
    shawnery

    shawnery Well-Known Member

    Always 5.8 and it was three part.
     
  15.  
    hempisphere

    hempisphere Member

    When I used AN I got around 5.8 also and I used the 3 part and I've used sensibloom (2 part) and always had a 5.8
    On that note, the Remo doesn't seem to need adjusting either, it sits around 5.8 as well.
     
  16.  
    Elsembrador

    Elsembrador Well-Known Member

    How long did you veg?
     
  17.  
    foliage2018

    foliage2018 Active Member

    Why the hell mine goes to 5,3 :-D
    I have a PH meter calibrated.
     
  18.  
    shawnery

    shawnery Well-Known Member

    Your dosages must be off? Even my masterblend dry fert stabilizes at 5.8 with their dosages. The minute you put a little mpre or a little less it throws it was off.

    Just a thought.
     
  19.  
    foliage2018

    foliage2018 Active Member

    I don't think so. I always keep the proportions of G:B:M=1:1:1. And proportions of 3part:additives=2:1. I measure it by a measuring glass.

    Did you notice the bubbles in the res tank start to bubble wildly when you add a micro part? It looks like the air bubbles are merging and creating bigger ones right after you add it. It last for about 10h to get to a normal bubbling.
     
  20.  
    hempisphere

    hempisphere Member

    Trimmed the shit outta her and she is looking good. 20190102_201424.jpg
     

Share This Page