AN to Remo

hempisphere

Active Member
Im finishing current flowering with the regiment I started (AN) but for next runs im switching to the Remo lineup.
Thoughts? Who has made the switch? Also, will I have to monitor my pH more than I have been with the AN pH perfect recipee? I used to check pH lots, but with AN I've noticed it is as promised, always right on. Can I expect the same with Remo?
 

shawnery

Well-Known Member
Not the question but can I suggest moving to much cheaper dry nutes. I've moved over to Masterblend but there is tons of info on jacks professional hydro nutes.
 

CikaBika

Well-Known Member
Doesnt that depents on whit what you lower ph?? I'm assuming you grow hydro, and I'm talking about soil.. Let Somebody smarter chip in..
 

myke

Well-Known Member
I’m new so take it as you will. Having ph stabilizers in the mix will hide potential problems at least that’s my take.ph tells you what’s going on. Spending extra $ to have stablizers is just a waste imo. Plenty of brands out there that are reasonable in price. You add ph down to your top up water then let it sit for 24 hrs.
Just my thoughts.
 

hempisphere

Active Member
Thanks guys, Remo is on order. I've wanted to try it for a while and now is the time.
Anyone got pics of a Remo crop?
 

shawnery

Well-Known Member
Interested in hearing the results considering the price tag for this stuff. I thought AN was pricey and this stuff knocks that price out of the ballpark.

Good luck!
 

hempisphere

Active Member
Week 2 flower with the new Remo nutes. I've mixed according to the schedule with zero deviation. RDWC
I like it so far, but I look forward to the end to really know...
 

Attachments

foliage2018

Well-Known Member
I have a Q to ANs you had before. Did you have 3part nutes? At what PH did AN stabilize? When I mix mine 3part with RO, it stabilizes at 5,3.
 

hempisphere

Active Member
When I used AN I got around 5.8 also and I used the 3 part and I've used sensibloom (2 part) and always had a 5.8
On that note, the Remo doesn't seem to need adjusting either, it sits around 5.8 as well.
 

shawnery

Well-Known Member
Your dosages must be off? Even my masterblend dry fert stabilizes at 5.8 with their dosages. The minute you put a little mpre or a little less it throws it was off.

Just a thought.
 

foliage2018

Well-Known Member
I don't think so. I always keep the proportions of G:B:M=1:1:1. And proportions of 3part:additives=2:1. I measure it by a measuring glass.

Did you notice the bubbles in the res tank start to bubble wildly when you add a micro part? It looks like the air bubbles are merging and creating bigger ones right after you add it. It last for about 10h to get to a normal bubbling.
 
Top