mr.bubbles
Well-Known Member
Does anyone has experience with Inventronics drivers? I got 3 QB96 hooked up parallel and Im only getting 53v and 4.4amps max. When I put the driver to a single QB I get 56v and 4.3amps max. I have a dc meter connected to a shunt. The driver was used of ebay, I bought 3 of the same driver for $12 a piece shipped. All 3 drivers has the same value output. Here is the link to the datasheet https://www.inventronics-co.com/wp-content/uploads/2017/12/DS-EUC-320SxxxDTST-Rev.D.pdf
Did I hooked up the lights correctly based on what the driver is pushing out?
![20220101_144524.jpg](/data/attachments/4160/4160173-0a21dd3da441c5bca14903dd902cef8f.jpg)
![20220101_144538.jpg](/data/attachments/4160/4160175-6a71866b43e1f7cf4901322daeaa88b7.jpg)
Thanks for the help!
Did I hooked up the lights correctly based on what the driver is pushing out?
![20220101_144524.jpg](/data/attachments/4160/4160173-0a21dd3da441c5bca14903dd902cef8f.jpg)
![20220101_144532.jpg](/data/attachments/4160/4160174-3fc9a1e129f36874e0c59b27125b7199.jpg)
![20220101_144538.jpg](/data/attachments/4160/4160175-6a71866b43e1f7cf4901322daeaa88b7.jpg)
Thanks for the help!