1st Time De-Winterizing

Brian151 · Mar 22, 2015

So I spent this morning getting all the supplies to dewinterize my BHO but I need someone to tell me the ratio to use for oil and everclear. Not sure how much and I don't wanna use too little of anything.

Twitch · Mar 22, 2015

de-winterizing? the opposite of winterizing?

how much oil you got?

Brian151 · Mar 22, 2015

Meant to say winterizing. I got about an ounce

Twitch · Mar 22, 2015

3/4 to 1 cup don't heat it up just let it dissolve at room temp

Brian151 · Mar 22, 2015

Do I not need a temp gun for the process?

Steele_GreenMan · Mar 23, 2015

Brian151 said:
Do I not need a temp gun for the process?

As was said, no heat is used, therefore no need for a temp gun to monitor temps.

Dissolve, throw in freezer, filter after atleast 12 hours or so, inside the freezer filtering is best

Twitch · Mar 23, 2015

put your filter and what ever you are collecting the solution in, into the freezer with your solution.

Brian151 · Mar 23, 2015

I'm trying to do the steps off of ColoradoBudBlog. They seemed to be the most informant

Brian151 · Mar 23, 2015

And thank you guys, that helps alot

chewberto · Mar 28, 2015

Brian151 said:
I'm trying to do the steps off of ColoradoBudBlog. They seemed to be the most informant

The reason I warmed up the ethanol to 85 degrees in the tutorial was to expedite emulsification! It isn't needed at all, and actually cold is best. The reason I used a temp gun was when I was vaccum purging the final product I didn't want to start boiling off the volitile cannabanoids and terpenes. Again, it is not necessary to use heat, I did to speed things up. best method is to cold purge, but it takes a while. Hope this helps..

Fadedawg · Mar 29, 2015

Brian151 said:
So I spent this morning getting all the supplies to dewinterize my BHO but I need someone to tell me the ratio to use for oil and everclear. Not sure how much and I don't wanna use too little of anything.

I do it by eyeball at around 10:1. It needs to till pour like alcohol at 0F.

http://skunkpharmresearch.com/getting-the-green-and-waxes-out-afterwards/

Brian151 · Mar 31, 2015

Th

chewberto said:
The reason I warmed up the ethanol to 85 degrees in the tutorial was to expedite emulsification! It isn't needed at all, and actually cold is best. The reason I used a temp gun was when I was vaccum purging the final product I didn't want to start boiling off the volitile cannabanoids and terpenes. Again, it is not necessary to use heat, I did to speed things up. best method is to cold purge, but it takes a while. Hope this helps..

Thank you, that helps alot. You're the one doing that process on C.B.B?

1st Time De-Winterizing

Brian151

Member

Twitch

Well-Known Member

Brian151

Member

Twitch

Well-Known Member

Brian151

Member

Steele_GreenMan

Well-Known Member

Twitch

Well-Known Member

Brian151

Member

Brian151

Member

chewberto

Well-Known Member

Fadedawg

Well-Known Member

Brian151

Member

Similar threads