Recent content by Nutria

  1. N

    Is this adequate to root clones?

    Get a white led bulb. Stop using CFLs
  2. N

    Bridgelux EB Series Build

    Strip voltage =/= system voltage Even if wired in series each strip would have a voltage dependent on how much current is provided. System voltage would be 39v but each strip would have a voltage drop of 19.5v. (19.5v*0.7a=13.65w)*2 =27.3w 39v*0.7a =27.3w
  3. N

    Setup for growing in cool temperatures

    Last summer it reached 30c/86f ambient temp and I got large yield while quality wasn't good. When temps go below 20c/68f I can't really manage to get the quantity even if the VPD should be on point with a RH between 30% and 40%.
  4. N

    Best budget Led Strip build for 2x2 tent

    If you started researching about linear led strips you probably saw this page http://ledgardener.com/diy-led-strip-build-designs-samsung-bridgelux/
  5. N

    Bridgelux EB Series Build

    2x 1ft or 2ft strips wired in series are just like a 4ft strip.
  6. N

    Bridgelux EB Series Build

    I had 2 problems. 1. A little flickering due to a badly soldering job I done on a strip connection. 2. System not working at 100% power. I got a potentiometer advertised as "100k linear pot" but that wasn't correct, unplugged the pot and everything is working over the top.
  7. N

    Bridgelux EB Series Build

    I am using a HLG-150h-42b and everything is working great (after I thrown the 100k pot in the trash). https://ledgardener.com/forum/viewtopic.php?f=11&t=1406
  8. N

    Bridgelux EB Series Build

    I'm not sure I got what you're saying. I have a eb2 setup: two strips are in series and then all couples are parallel wired.
  9. N

    2x2 Tent Setup

    Write him an email. He s also active in this forum.
  10. N

    Setup for growing in cool temperatures

    I am of exactly the same opinion: IR. I grow inside an attic and it's damn cold during winter, hella hot in summer. Energy consumption is important for me so an electric heater isn't a valid option. Styrofoam could work, I am going to place a layer of foam between the tent and the floor. Btw I...
  11. N

    2x2 Tent Setup

    nah that china light is just trash. Atreum(there's also the heatsink) and HLG boards are made the same, equal lights. Atreum should be US based only while @diyled is a official HLG distributor in EU at www.diyleduk.co.uk.
  12. N

    2x2 Tent Setup

    both digikey and arrow only ship from US Avnet is B2B look at tme.eu I am from eu too and bought from export-estonia (ebay store). They also sell TCI linear strips for a budget build
  13. N

    2x2 Tent Setup

    where are you buying Vero from?
  14. N

    2x2 Tent Setup

    Btw, why don't you get a Atreum 288.2 and a hlg-120h-54? There would be plenty light for a 2x2 You could get a a hlg-240 from the start and just add one more board when you upgrade to 4x2
  15. N

    2x2 Tent Setup

    you are going to buy mostly from digikey and arrow anyway
See more
Top