Tha Dope man187
Active Member
this is my first grow first is the information about what im doing...
ok to start off im doing a stealth, micro, cfl, soil grow in a small scale dresser
first ill list all the things u need to grow(dumb coming from a beginner but its easier to state the way ill be responding to the things u need)
1. wall/side/bottom/top reflection for the walls for better lumens to your plant.
-ill be using white printing paper taped to the sides/bottom/top of the dresser.
2. light leaks-ill be taping one side of Velcro to the 2 sides of the dresser near the top and 2 on the top roof of the dresser and the other sides taped on to a garbage bag with one side all white printing paper taped to it and the other just a black garbage bag and im using Velcro so the garbage bag will overlap the drawers so o light will leak out threw any cracks
3. Air- in the back end of the dresser i cut out 2 holes at approx.
(not completely circle) becuz i used a knife to do so one at the top right hand corner and one at the bottom left hand corner
the one at the top right was for outtake and the one on the bottom left was for intake they are both just holes right now but i was going to leave them as just open holes until the plants start to flower/bud/smell then i was going to buy enough materials to make 2 homemade carbon filters and add ONLY one fan to the outtake hole NO FAN TO THE INTAKE and becuz i attend collage and live with my family for another 2 years so i need to have no smell and no noise (noise)unless im home(noise)
so i was only going to have the fan running when i get home 3pm to when i go to bed 10 earliest and 12 latest (unless its a weekend) so only have the fan running for a 3pm-11pm schedule on average and mostly longer on weekends
would this work?
4. water- iwas just going to use plain old tap water but i was going to leave it in my closet or something with the lid open for 24-48 hours (which will turn it into distilled water?)
so the ph will be normal correct?
5. odar already stated im using a homemade carbon filter, dryer sheets, and maybe coffee grounds
6.lighting- CFLS ALL THE WAY but not usre the wattage im just going to try and get 4 bulbs of around 23-28 watts of more (what ever i can get for $10)
what store has cheaper lighting? walmart or Canadian tire?
6. light reflectors- im going to be using pie pans/tins for my light reflectors but either putting a piece of wood on the back or not(probably wood or thin wood left from scraps of the dresser) then ill screw the pie pan/tin into the wood and add 2 holes in each pie pan/tin for the light fixture/socket cords on each side. then ill add on more hole on each side a few inchs infront of the ligth socket/fixture so i can add a thin metal chain to the cfls to hole them flat of the surface of the pie pan/tin then add closed screw in hooks( C- looks like this when its a open hook and O- looks liek this when its closed) and attach chains to adjust the light height.
7. lighting adjustments-for adjusting the lights im attaching CLOSED screw-in hooks into the pie pans/tins (or wood on the back of the pie pans/tins) and adding cheap chains(2 or 4 for every pie pan/tin)
and then adding screw in hooks into the roof/top of the dresser so when i need to lower/raise the lights i just lift the chain higher and put the closer/futher link on the chain on the screw in hooks on the roof/top of the dresser
8. outside the dresser set up-i added 2 screw in the bottom of the bottom dresser drawer but they kinda snapped from flipping the dresser up and down and sideways so now the bottom drawer pretty much leans on them but the drawer has the complete same appearance.
although im only going to be opening my top drawer (the one i added hings too((one broke off cuz the dressers a piece of SHIT)) ) so it only has one hing but i added 3-4 garbage ties and tied them around a screw on the inside of the dresser and one on he drawer to help support the drawer hen its opened(becuz the hings were added and the drawers were a bad size theres about a 1/2-1 inch hole where the hing is) but the garbage bag will cover up the light leaks becuz its overlapping every edge, crack, and hole
so to maintain, water, talk to, look at, and play with my plant lol(shes gonna be my good friend that id never fuck u know one of those girls u met in high school that u dated and then dumped and they're like the closest person to u?) lol this is going to be mine lol ok so im going to be adding the pictures i have of the dresser before i did anything and then the steps i did
thats my basic set up/ plan for this grow(my first) i wont yeild much becuz the space in restricted to hight but if they can do in in a pc case i can deffiently do it in this motherfucker heres my steps and pictures of the steps i did (with a legend in my next post after the pictures
ok to start off im doing a stealth, micro, cfl, soil grow in a small scale dresser
first ill list all the things u need to grow(dumb coming from a beginner but its easier to state the way ill be responding to the things u need)
1. wall/side/bottom/top reflection for the walls for better lumens to your plant.
-ill be using white printing paper taped to the sides/bottom/top of the dresser.
2. light leaks-ill be taping one side of Velcro to the 2 sides of the dresser near the top and 2 on the top roof of the dresser and the other sides taped on to a garbage bag with one side all white printing paper taped to it and the other just a black garbage bag and im using Velcro so the garbage bag will overlap the drawers so o light will leak out threw any cracks
3. Air- in the back end of the dresser i cut out 2 holes at approx.
(not completely circle) becuz i used a knife to do so one at the top right hand corner and one at the bottom left hand corner
the one at the top right was for outtake and the one on the bottom left was for intake they are both just holes right now but i was going to leave them as just open holes until the plants start to flower/bud/smell then i was going to buy enough materials to make 2 homemade carbon filters and add ONLY one fan to the outtake hole NO FAN TO THE INTAKE and becuz i attend collage and live with my family for another 2 years so i need to have no smell and no noise (noise)unless im home(noise)
so i was only going to have the fan running when i get home 3pm to when i go to bed 10 earliest and 12 latest (unless its a weekend) so only have the fan running for a 3pm-11pm schedule on average and mostly longer on weekends
would this work?
4. water- iwas just going to use plain old tap water but i was going to leave it in my closet or something with the lid open for 24-48 hours (which will turn it into distilled water?)
so the ph will be normal correct?
5. odar already stated im using a homemade carbon filter, dryer sheets, and maybe coffee grounds
6.lighting- CFLS ALL THE WAY but not usre the wattage im just going to try and get 4 bulbs of around 23-28 watts of more (what ever i can get for $10)
what store has cheaper lighting? walmart or Canadian tire?
6. light reflectors- im going to be using pie pans/tins for my light reflectors but either putting a piece of wood on the back or not(probably wood or thin wood left from scraps of the dresser) then ill screw the pie pan/tin into the wood and add 2 holes in each pie pan/tin for the light fixture/socket cords on each side. then ill add on more hole on each side a few inchs infront of the ligth socket/fixture so i can add a thin metal chain to the cfls to hole them flat of the surface of the pie pan/tin then add closed screw in hooks( C- looks like this when its a open hook and O- looks liek this when its closed) and attach chains to adjust the light height.
7. lighting adjustments-for adjusting the lights im attaching CLOSED screw-in hooks into the pie pans/tins (or wood on the back of the pie pans/tins) and adding cheap chains(2 or 4 for every pie pan/tin)
and then adding screw in hooks into the roof/top of the dresser so when i need to lower/raise the lights i just lift the chain higher and put the closer/futher link on the chain on the screw in hooks on the roof/top of the dresser
8. outside the dresser set up-i added 2 screw in the bottom of the bottom dresser drawer but they kinda snapped from flipping the dresser up and down and sideways so now the bottom drawer pretty much leans on them but the drawer has the complete same appearance.
although im only going to be opening my top drawer (the one i added hings too((one broke off cuz the dressers a piece of SHIT)) ) so it only has one hing but i added 3-4 garbage ties and tied them around a screw on the inside of the dresser and one on he drawer to help support the drawer hen its opened(becuz the hings were added and the drawers were a bad size theres about a 1/2-1 inch hole where the hing is) but the garbage bag will cover up the light leaks becuz its overlapping every edge, crack, and hole
so to maintain, water, talk to, look at, and play with my plant lol(shes gonna be my good friend that id never fuck u know one of those girls u met in high school that u dated and then dumped and they're like the closest person to u?) lol this is going to be mine lol ok so im going to be adding the pictures i have of the dresser before i did anything and then the steps i did
thats my basic set up/ plan for this grow(my first) i wont yeild much becuz the space in restricted to hight but if they can do in in a pc case i can deffiently do it in this motherfucker heres my steps and pictures of the steps i did (with a legend in my next post after the pictures
Attachments
-
59 KB Views: 24
-
52.4 KB Views: 22
-
54.5 KB Views: 23
-
73 KB Views: 25
-
63.2 KB Views: 22
-
56.2 KB Views: 18
-
56.6 KB Views: 16
-
64.9 KB Views: 17
-
45 KB Views: 25
-
39 KB Views: 36
-
32.2 KB Views: 17