The Irish Growers Thread!

nidgy

Well-Known Member
Avoid the plywood if you can.
Its very hard to wipe down and will eat paint.
Mold likes it too.
Thanks for that buds would of never taught of mold,any ideas on timberin out the inside?want to insulate it aswell without building cavity walls,was thinkin of the plywood that has the insulaion fitted to it but its def is a no go if mold is fond of it.
second this ... if your going blockwork,and as a shed i assume its 9inch cavitys for walls, so grab a few 3 inch solids and put up a partition wall even 4 inch solids...

i know you were depending on the blockwork for size, when the time comes see if you can pull the walls that bit on the lenght, width is fine...

flat roof or ridge...
I was thinkin of buildin with 4in solids on the flat 86 want a good solid shed,ill probally go ridge roof was thinkin of a flat roof aswell
With the rigeroof ill have a bit of storage with the attic,ill cut in a partition with the 4in on there edge
Wont b startin for another month or two just doin my homework now
 

eyelid

Well-Known Member
This past summer someone in the uk thread contructed an entire shed out of odd and ends and recycled pallets. With pictures. I'd refer you to him nidgy, but again, I can't remember who. Maybe bandit knows
 

eyelid

Well-Known Member
yeah bought from the shop, the clerk hadn`t a notion about the beans i wanted, butthey were helpful in the resppect they took my money hahahaha, ah i only deal with them as its in and out and cash....

also there only a 20 min drive away..
Wow they got a brick and mortar walk in store. Can't beat that!
 

ae86 grower

Well-Known Member
Thanks for that buds would of never taught of mold,any ideas on timberin out the inside?want to insulate it aswell without building cavity walls,was thinkin of the plywood that has the insulaion fitted to it but its def is a no go if mold is fond of it.


I was thinkin of buildin with 4in solids on the flat 86 want a good solid shed,ill probally go ridge roof was thinkin of a flat roof aswell
With the rigeroof ill have a bit of storage with the attic,ill cut in a partition with the 4in on there edge
Wont b startin for another month or two just doin my homework now

4in on the flat hahahaha sturdy as fuck, sure go with a 6in solid on its edge if thats whats in your mind...

i`d ridge it for storage, roof tile rather than a slate for saftey...
 

ae86 grower

Well-Known Member
This past summer someone in the uk thread contructed an entire shed out of odd and ends and recycled pallets. With pictures. I'd refer you to him nidgy, but again, I can't remember who. Maybe bandit knows
love the ingenuity of some people, to be able to make and do, its a thing thats lost on the youth...
 

nidgy

Well-Known Member
are your block building it?
Just batton the inside and sheet with thermo. nothing else needed
Yes buds gonna block it 4in on the flat,gonna b a good solid shed
4in on the flat hahahaha sturdy as fuck, sure go with a 6in solid on its edge if thats whats in your mind...

i`d ridge it for storage, roof tile rather than a slate for saftey...
Gonna go with the 4in on the flat
God i hate layin six inche blocks killer on the back...haha
Soon as i get started ill post a few pics of the progress to the snd lads on the thread.
@eyelid i wouldnt make it out of pallets brick only u know the story about the three litlle pigs :wall:
 

Growboss

Member
I have my site sorted...im looking for something fast that will have big yeilds...my head is fukd from looking at seeds
Same here, hard to recommend a go to strain when starting from scratch, a few of us on here are in the same boat, part of the fun is looking for the killer pheno's, get popping about ten seeds to start or twenty if doing regs. Or try and get your hands on an elite clone to save six months work, just watch for pests.
 
Top