DiY LEDs - How to Power Them

oill

Well-Known Member
Hi all. I have want to do a build with 3 quantum boards and 4 cobs.

Anyone know if I can use one driver to do that? And I so... Which one?

I have the 3 qb 288s already, but open to suggestions on the cobs.

Space is 120 x 120.
 

Dopaw13

Well-Known Member
Hey guys i am working on making my first real led light want to do 4 Veros then get some red, blue, uva,uv, green leds to even out my spectrum. I was looking around on how to set the up the different color channels with some LDDs and i am going to be getting the typhoon controller but i couldnt really find out how to really hook them up anyone know of a wire guide or video that could help me out would be awesome thanks.
 

mahiluana

Well-Known Member
couldnt really find out how to really hook them up anyone know of a wire guide or video that could help me out would be awesome thanks.
I also tried to do the same - more even spec, but with different chips.

Didn`t use any wires inbetween the different chips

It´s a watercooled build and will be tested this winter
? Why do you try to even the spectrum of your lamp ???


S6002089.JPG
 

TheHero

Member
What if some chips are worthless - they do not give any good waves to plant. Just spent money and electricity. And You wouldnt even know..
 

mahiluana

Well-Known Member
What if --- I know the worth of my chips and their data.

give any good waves to plant
all chips are inside a 360nm - 730nm range.
all chips are driven @ 20-50% of max. load
watercooled led light in this build = light - heat cogeneration
The lamp produces my hot water, that I need in shower and kitchen,
it`s three times more energie efficient - than any aircooled setup with cree superhero-binning...
that you can imagine.

spent money
I save the money for my hot water bill - and use it, to pay the electr. bill of my lamps
<> more or less cost neutral. This winter I will substitute heating costs as well... and maybe stop
!!! burning oil in my house.:fire:

And You wouldnt even know
I guess, I know a lot more about chips, efficiency...... and the future, than most of any dumb superheros....and DJ`s

What if..... :spew:you simply got some strange brainsick .... locking to my colors ???(:
 

mahiluana

Well-Known Member
what ??? do you measure each led chip you buy ???

I know the range of the waves - and I trust the producers to tell the ~ data
 

TheHero

Member
So, it is not like You know everything. Your science is based on belief of what seller tells You. Cool. I am just messing around :)
 

mahiluana

Well-Known Member
Could You share
Put ---> watercooled<--- in the SEARCH above , or lock in my contents.
you will find pics and related content... and also other watercoolers.

i buy my chips in asia - but you can use any chip you !!! trust.
i use my lamps in combination with heatexchangers
if you really want to DIY --- you can have a look @ my website.
i sell watercooled led kits for a reasonable price / and chips, size and power is your choice
my brand is: lumen-laden.de

Watercooling without heatexchanger is not recommended
with 550W led watercooled set up ( like in the pic^) you can produce 120L of hot
shower/kitchen water (3 pers.)

You can cool up to 1200w lamps with only a little water pump 3W - no fans no noise
 

Dopaw13

Well-Known Member
what i am struggling with is getting a single driver ac/dc running it to a ldd board dc/dc drivers for the different colored leds to be able to have a veg bloom switch ect know of any guides i can look up for it mahiluana?
 

Dopaw13

Well-Known Member
yeah i was just going to use different drivers but after i saw a few of Growmau5 you tube vids i think i am trying to get to advanced with it but if i am going to do it i wana do it right
 

bleak

Well-Known Member
Hi! I'm working on a new setup and have a Meanwell APV-12-12 to power 2 CPU fans.

What is the best (meaning safest and most reliable) way to connect the APV-12-12 to the mains? I have some AC adapters laying around, but I don't know if they're suitable. Could someone more knowledgeable let me know if any of these adapters will work?

1. Motorola adapter - output 3.6v 600mA
2. Achme adapter - output 5v 3.0A
3. Nokia adapter - output 5.3v 500mA
 

The Dawg

Well-Known Member
Hi! I'm working on a new setup and have a Meanwell APV-12-12 to power 2 CPU fans.

What is the best (meaning safest and most reliable) way to connect the APV-12-12 to the mains? I have some AC adapters laying around, but I don't know if they're suitable. Could someone more knowledgeable let me know if any of these adapters will work?

1. Motorola adapter - output 3.6v 600mA
2. Achme adapter - output 5v 3.0A
3. Nokia adapter - output 5.3v 500mA
No Adapters Are Needed. Just Use A 2 Wire Power Cord From An Old Lamp :hump:
https://www.1000bulbs.com/product/137344/ELEC-56185450.html?gclid=EAIaIQobChMI-aXYm4zQ1wIVkoJpCh0z6w5qEAQYASABEgJXCvD_BwE
 

bleak

Well-Known Member
Thanks Dawg! If I use a normal 2-wire power cord, I'm aware I need to be careful, as it'll be carrying the full power from the mains (220 volt in my country)

Is there a safety advantage to using an AC adapter? In other words, if I'm stupid enough to somehow zap myself - Won't the AC adapter just give me a 'slap on the wrist' in comparison to the 2-wire power cord which could kill me?
 

GBAUTO

Well-Known Member
Is there a safety advantage to using an AC adapter? In other words, if I'm stupid enough to somehow zap myself - Won't the AC adapter just give me a 'slap on the wrist' in comparison to the 2-wire power cord which could kill me?
The APV is the same thing as the AC adapters you have. It converts AC line voltage to 12VDC rather than the 3~5V the smaller adapters output. The only additional hazard is that you need to direct wire it to a plug or bus bar rather than plugging it into an outlet.
 

bleak

Well-Known Member
The APV is the same thing as the AC adapters you have. It converts AC line voltage to 12VDC rather than the 3~5V the smaller adapters output. The only additional hazard is that you need to direct wire it to a plug or bus bar rather than plugging it into an outlet.
Thanks Gbauto, that makes total sense. I'll be careful connecting the APV-12-12 to mains power!
 
Top