4th Official Party Cup Grow Off Voting Thread

The Gator

Well-Known Member
Yeah, would be good, I went looking around your site when I needed one last round and noticed you were doing only 6" and 8". Smaller rooms can easily use 4" with LED's, my current flower room is 4'x9.5'x7' and I use an existing 4" vent hole to exhaust with no issues. Just threw a CMH fixture in there this weekend and even with that all I had to do was crank my incoming cooler air to 1/3 throttle to maintain the temps. CMH increased temps by about 6F with the CMH vs. LED's, pretty well same wattage swap, outdoor temps are hovering in the mid-80's), didn't have to adjust my exhaust at all.
Ill make sure to let the guys know that there is a large interest. We tried to make our Gator filters as small as we could and we are about 2 inches wider and taller than a Can 33 so we were trying to squeeze it in, but it turned out to be most efficient with a 6 in fan. Best laid plans of mice and men LOL
 

snowboarder396

Well-Known Member
Well if things go the way we want them to with this system. It would be a complete package of fan, duct, and filter. We are still working on the filter part, we want to ensure good odor capture but also make it easy to change and affordable to the consumer.
Any idea on a possible time frame?
 

The Gator

Well-Known Member
Any idea on a possible time frame?
Not currently. Once i know i will let you guys know, hopefully it can be done soon. It seems to be a very big market that we are not hitting. If you guys happen to have any more questions or even suggestions of filter sizes, let me know over PM. I dont want to hijack the voting thread.

Sorry to Hyroot if i distracted from the voting, i know your eager to get the cup finished
 

FrozenChozen

Well-Known Member
I dunno maybe??? Its just regestration does it matter who starts the thread? I mean chronikool started the voting thread( not hyroot), + the ball does kinda need to get rolling if we want to see a decent number of people in the next comp.
msg me when the ball gets rolling, I'd like to jump in!
 

hyroot

Well-Known Member
The Chronookle Popularity System
1st - 3 points
2nd - 2 points
3rd - 1 point



Hyroot 1
Psuagro 1
B166ER420 1
Cococola36 3
Chronikoole 12
KineBoisin420 15
Adrosmokin 19
Tkowitha123 32





1st place - Tkowitha123
2nd place - Adrosmokin
3rd place - KineBoisin420




TKO you now are host of the next cup. Party on
 
Last edited:

KineBoisin420

Well-Known Member
Congrats to all the weiners. Thanks all...it was a great learning experience for me, with it being my first Party Cup AND my first 12/12 f.s. Looking forward to being part of the next one.

Question is...will the next comp stay the same rules, or will TKO change anything up to make it harder on us? :bigjoint:
 

puffenuff

Well-Known Member
Ill make sure to let the guys know that there is a large interest. We tried to make our Gator filters as small as we could and we are about 2 inches wider and taller than a Can 33 so we were trying to squeeze it in, but it turned out to be most efficient with a 6 in fan. Best laid plans of mice and men LOL
My gator filter works just fine with my 4" S&P fan. First I bought a 6" to 4" duct reducer like this:
http://www.homedepot.com/p/Master-Flow-6-in-to-4-in-Round-Reducer-or-Increaser-R6X4/100111736
but it didn't fit my fan. So I just ghetto rigged it, stuck it in and taped it up nice and snug. Works like a charm.

But...I would really be interested in a smaller and lighter filter size for sure.
 

The Gator

Well-Known Member
My gator filter works just fine with my 4" S&P fan. First I bought a 6" to 4" duct reducer like this:
http://www.homedepot.com/p/Master-Flow-6-in-to-4-in-Round-Reducer-or-Increaser-R6X4/100111736
but it didn't fit my fan. So I just ghetto rigged it, stuck it in and taped it up nice and snug. Works like a charm.

But...I would really be interested in a smaller and lighter filter size for sure.
We have heard of people doing that and they have seen great results. The big issue is assuredly the size in those situations. Im glad that you were able to make something work and i have made a list of everyone so far who has shown interest. This way i can PM all of you when we get to the point of release.
 

The Gator

Well-Known Member
hey guys i mentioned to Hyroot that I wanted to extend a special to everyone who participated and was involved with the Grow Cup, and he said that a special would be sweet. So I have created an exclusive special for you guys.

We are going to give 25% off your filter order untill 7/11/14. This is exclusive only to you guys and unfortunately cannot stack with any of our other specials, but by my calculations it should provide almost everyone with free shipping and a decent discount on the order as well.

You need to enter the code RIU4C

Please feel free to message me if you have any questions about the special, or if you are curious about what a good set up would be. Also feel free to share this discount with your friends.

Thank you for letting me and Green Gator Filters contribute to this cup, and i hope to see all of you at the next cup!
 

Adrosmokin

Well-Known Member
hey guys i mentioned to Hyroot that I wanted to extend a special to everyone who participated and was involved with the Grow Cup, and he said that a special would be sweet. So I have created an exclusive special for you guys.

We are going to give 25% off your filter order untill 7/11/14. This is exclusive only to you guys and unfortunately cannot stack with any of our other specials, but by my calculations it should provide almost everyone with free shipping and a decent discount on the order as well.

You need to enter the code RIU4C

Please feel free to message me if you have any questions about the special, or if you are curious about what a good set up would be. Also feel free to share this discount with your friends.

Thank you for letting me and Green Gator Filters contribute to this cup, and i hope to see all of you at the next cup!
Awesome deal. Much appreciated.
 
Top