heat issues

#1 I used a 300w led on my last grow, the results were 32g of dry bud, great quality but just tiny buds. Thought I'd give hps a go to see what differences there are aside from the obvious bigger yield. My set up is a 60x60x150 tent, lumii 600w hps dimmable ballast, RAM carbon filter attatched...

Hi. I would like to model my spydrx plus unit so that the power supply is remote and can be placed outside a tent. It's just to damn hot even with a exhaust fan and a 4" intake from an AC unit. Their new version has this feature and to be honest most manufacturers should at least offer a...

Hi. I would like to model my spydrx plus unit so that the power supply is remote and can be placed outside a tent. It's just to damn hot even with a exhaust fan and a 4" intake from an AC unit. Their new version has this feature and to be honest most manufacturers should at least offer a...

Left my plant for an extra day without feeding and went in and my temp was away up to 35 degrees, do you think it will come back to life? Temp is always 25-30C but I turned intake fan off because the outside temp had dropped, but it went back up yesterday and today and went in and my temp was...

Ok I'm growing organic out the ground I fuckn dug for a beek strait like two huge grave so I got 1 6foot long 3 ffeet deep and 4 food wide how many plants think I can fit I was going to give em about 15inches a piece from each other but hey I didn't go crazy help me please oh ya will my clones...

Hey guys so i have 6 plants in total in a 2×4×8 closet . 2 plants in a 1 gal container (G13 Purple haze, world of seeds AK ryder auto , and 4 other randoms from smokes still in solos (a month behind) and I been having issues with heat. Its been 85-95 degrees in the grow room for the past few...

Hello all, just had my 1k sodium start cycling on me so i went and brought a couple of 600s with mag ballasts, my question is this, my 1k ballast was digital , it didn't chuck out too much heat but always posed a challenge when keeping my space cool, i now have the 2 magnetic 600s and i swear...

Recently I started a grow and due to discretionary reasons I had to move it into my attic which is literally as hot as hell during the day. My grow box is 2" thick styrofoam and is insulated well from the environment. The problem isn't the attic though...it's the three cobs that are causing the...

trying to stop this from spreading. Too much nutes? Went from 4-4-4 to 8-8-8 organic fed with water. Been giving it just filtered water now. Also got real warm in the box for about 3 days. 88-90F. I'm scared it's going to keep yellowing out. I just switched my light hour schedule so they come on...

im an absolute beginner at growing, but have gained a lot of knowledge through this forum and the internet. but here is my setup. im running 3X150W bloom CFL in soil, the exhoust is a 180m3/h fan. and i have added a second 90m3/h fan to aid the air past the reflectors (what i think is keeping...

Greetings RUI community! Been living on here for a few weeks soaking up all I can from you amazing DIYers. I'm about ready to put together an order for Jerry from Kingbrite, but I am not sure about which drivers I should use with this setup. What I need is a super efficient setup for extreme...

Hi guys hope you're all well, I'm having some issues especially with my early skunk, New growth is quite yellow and frail (almost like it's shriveled up). It happened to my skunk#1 as well but the problem seems to have been fixed on that one. Any help on why this is happening would be...

Hi folk, anyone able to fit a 250w cfl in a 5inch cool tube? I'm thinking using 2 x 250w or 1 x 250 red and x 125w blue.

Hi folk, I'm doing a wardrobe grow, I have 1 good plant that I have lst'd (got over 5 tops) the heat with one 400w mh in cooltube is over 90 so looking at changing. I started with a 125 blue cfl and have at my disposal 2 cool tubes, 400 +600 balasts and 1 125w be cfl. Would a 600w hps be...

hello all, I've been learning from all of you for months now and want to start off by saying thank you. This is my first thread but need some help with a heat issue. I have a 4'x8' Gorila Tent running 1 600w HPS and 1 1000w HPS. To vent the tent I have 1 6" ventech inline fan with filter...

They were planted 14 days ago... but tap root was a little bit dry, i rehydrated them and when tap root looked good and hairy planted. they had it difficult to create a good root system it looked and when i transplanted from solo cups to 1/2 gallon pots some 4 days ago the one in the left had...

I have a problem thats been real frustrating. I recently assembled a grow light which is 4 Vero 18 3500k running at 50W each for a total of 200w + the fans. I have 5 fans running, 1 fan just for extracting the hot air from the heatsinks and drivers. So far the heatsinks are cool to the touch...