Swagelok 304l ss vessel

not trying to hijack just trying to cheer SDA up.

^ mission accomplished

Think about it like this, if you guys rinsing w butane were to pressurize a container, and then put 800-2500psi behind it that is also non-polar, your yields will spank like they never have before. Just imagine a thorough job as co2 blows pat all the weed and getting the co-solvent up out of there. Its the biz. Its why I can so easily beat the highest top shelf bho. No comparison.

Twitch. said:

dear got your numbers are very.... wide...
holds 10 grams to 45
and the cycle is 5 mins to 24 hours

and what about yeilds

Click to expand...

What's pictured above are 2 extractors for scfe 6kpsi and 10kpsi. The difference in price is subco2 is $500, SCFE starts at $5k, got a PLC for automating equipment to valves, pressure and temperature sensors, thermocontroller, co-solvent pumps, etc. All the extras are just that, extra. If not then manual mode is gonna have to do. That's such a heafty difference

"can so easily beat the highest top shelf bho. No comparison."
You should change your avatar...just sayin

Sirdabsalot462 said:

My vessel holds 3-115 grams...
I can utilize any liquid to extract the best oils.. As long as it's cold (anywhere between 5°-215° F)

It takes anywhere between 35 seconds and 47 days for a cycle..

You can run between 9-62 cycles...
Yield is always around 3%- 79% return...(varies with ambient temps)

I can actually make more concentrate than the starting material..
For example, I can take 5 grams of flower and create 14. 7 grams of the best concentrate ..
Yup..

Click to expand...

okay i just woke up am i reading this wrong? you can take 5 grams of flower/bud and get 14.7 gram? that means you can somehow triple the original amount. and at max there is only .8 grams of trics and maybe another .8 of oil max in the bud. humm i need to drink a coffee and make sure im not seeing things.

DCobeen said:

okay i just woke up am i reading this wrong? you can take 5 grams of flower/bud and get 14.7 gram? that means you can somehow triple the original amount. and at max there is only .8 grams of trics and maybe another .8 of oil max in the bud. humm i need to drink a coffee and make sure im not seeing things.

Click to expand...

Hehe...

Yes!!!!! Please re read the post...

I just re-read....hilarious.

The post was intentionally sarcastic.

Grab a 5 Hour Energy, take one dab of some sativa, preferably Durban, and read again, it's quite the vessel.


Magic and shhit..hehe

You are using freon bro! I dont think any educated oil smoker would touch your product especially a person smoking for medicinal reasons. Your talking about how great your extract is but the only picture i see is your avatar which to me looks like what i would consider a bunk run. Not to mention you are extracting with poison. Before you make claims about it being the best look at some pictures in the picture thread and rethink that notion.

never use freon bro. This is why they can say smoking causes brain damage.

Well if I didn't purge it out and left residues how people are suggesting1. Honey comb, crumble etc are all underpurged. Freon is used about 0.5%, to assist w viscosity. You guys swear butane is the biz, but it ain't about power 5 or neon. All you people ware stateing opinions, having not worked w it I can see how inexpierienced overall as a group, your common knowledge is lacking and the poor mans co² wannabe. Given the same plant matter was used blasting butane out of abs,pvc, or glass do not hold pressure nor heat, leading to easily beat w out a chance. Think about it, 24hr resident time, polar solvents, co2 not inflicting taste and focusing where ever targeted. I would not bet against me if it were my money on the line. So I challenge anyone I have the best wax around, because the solvent is whooping ass under pressure for long resident time takes advantage of solvent costs and maximizes selective yields.

if you had it tested and they said their was 0 freon i would smoke it. but you wont get all the freon out.

I removed from vessel task I got after getting Nectar of Pain to be able to do an other task.Now I want to take Vessel again, I gave again the skin to Maelin, combined in a new book of binding, got 2 new saga books, and gave them to Maelin, but no task, he just give me back the 2 books.Any ideas on how to get the task again ?Doh

My skills are unlike most on here. The fact is what shops here in L.A. sell is loaded w tane for weight or because inexpirienced dabbers like it. When I start selling these contraptions to shops, its w the intent on making a more conscience supplier, placing the burden on them. Armed soley w a hot plate and my equipment, would be able to easily convince them to cut the middle man. Which is any joe blow off the streets. You guys are the ones smoking residues, as I know more than one technique to purge out minute residues. I always get compliments on the wax I boast.

DCobeen said:

if you had it tested and they said their was 0 freon i would smoke it. but you wont get all the freon out.

Click to expand...

,When I did 5 grams of bud(4.7), I yielded )0.8, which on the first extraction was decent. It was likke 16% or so. I had trim of GIRL SCOUT COOKIES, yielded better than that OD bud, so its dependent on strain more than anything. Other factors contribute to nice or sorry yields.

DCobeen said:

okay i just woke up am i reading this wrong? you can take 5 grams of flower/bud and get 14.7 gram? that means you can somehow triple the original amount. and at max there is only .8 grams of trics and maybe another .8 of oil max in the bud. humm i need to drink a coffee and make sure im not seeing things.

Click to expand...

oilmkr420 said:

My skills are unlike most on here. The fact is what shops here in L.A. sell is loaded w tane for weight or because inexpirienced dabbers like it. When I start selling these contraptions to shops, its w the intent on making a more conscience supplier, placing the burden on them. Armed soley w a hot plate and my equipment, would be able to easily convince them to cut the middle man. Which is any joe blow off the streets. You guys are the ones smoking residues, as I know more than one technique to purge out minute residues. I always get compliments on the wax I boast.

Click to expand...

Pat yourself on the back as we bow down. If you use any chemical to extract that is not organic and pure then WTF are you thinking? Slap yourself hard. wake up. Realy lets all eat rat poison. It will get you high. Did God give you common sense?Hey all if we use nitro to break down weed we will not explode. hehe. really. wake the hell up. stop using those chemicals. they will end you long before you should have left.

^^^
Sirdabsalot462 likes this post.

It doesn't matter what co-solvent is used. What really matters is getting the solvents residues out. Freon didn't cling as well to the extract like butane does. Its just as easy to purge and does a sick ass job at replicating the matrix. Here's what my rig looks like assembled.

we vape oil, we don't smoke residues. you must be high...

Wow I read all this thread and it went absolutely no where. No video. No pics of finished product, etc, etc. What a let down. I could sit here and post a bunch of pics of someones co2 set up that I found on Google. Good job.

More pics of of weird ” vessels” in a filthy work area.


Neat-oh...

I'm gonna go dab some more residues..