Swagelok 304l ss vessel

Bar none, there isn't a better unit around in this price range more suited for the task at hand. Choice medical grade 304L stainless steel doesn't participate in reactions and is meant do handle co2, fitted w 1/2" strait thread so it can accept a liquid fill, check valves, needle valves, and just should install a rupture disc for good measure. Fucking thing rocks. Stop the procedure at any time having more control over the extraction is a major plus. Using heat under pressure is how to yield. At $500, this unit is going to be sold to shops as a cheap thrill, showing the proofs in the extract and the methods for how it was obtained was a very conscience effort for simple effective results predictable and repeatable.

so finally a picture of what i think is a Co2 extraction device... where does the material go??

Soooo, the picture is of what you get for $500? A few questions.

How much does it hold?

How much CO2 required per cycle?

What is the yield per cycle?

How long is the cycle.

How many cycles to fully extract the material?

What temperture controls does the customer have to provide?

Optimal weight is 10-45 grams of plant matter, about 1 1/4 lbs of co2 and can be hit 2 or 3 times before its depleted from this vessels pressure capability. Its rated rather low, but for a cheap thrill, the unit performs better than any butane extraction can do in all aspects. What do you expect when using 2kpsi along w specific co-solvents like Freon 113, and ethanol the expectations should be high as a formidable competitor and reigns supreme for extracting. I will be making that instructional dvd tomorrow w a COPD the factor at hand and easily slapped down from mmj/co2 collaberation very close to the relationship that gold and mercury share.

sub'ed up lets see the action bro im all about not using chemicals.

I am very interested in this as well.. I followed SP a lot in hopes of a co2 or dry ice type of extraction.

Yo fo show, will post a new video tomorrow posting the results. The vessels a beast.

So I got a gig offered after I performed the extraction for the newest member amongst the people I have taught. He and his partner said that smelled like pure medication and dude claimed he could not get stoned anymore. So I had to prove him wrong, I told him 5 hits and he was done. It happened in 3 and he was taken for a ride. Like when we first started smoking. He ultimately offered me a place to extract, my own office, and a spot to teach any future clients about SCFE. I think its a step in the right direction to achieving my goals. I got so used to secondary extracts I forgot what primary extracts smell like. Way sick ass shit. Now to finally have O.G.,Girl Scout Cookies, White Widow, and various other strains is giving me something to look forward to. Such a sweet spot to be in. No video was taken, so today I am busting down a video.

As i hold on to my seat waiting for the video. not moving so i dont miss it. lmao. I so want to see this way. I will use this method if it works as good as it sounds.

I didn't get to do the video today, still got to get a gauge, a rupture disc, and some adapters for my tanks. There's nothing worse than a bunch of no it alls correcting my methodology telling me about this or that missing or guessing what I'm not doing right. So I'm gettiing what I need to lead by example.

I really want to believe you buddy!!!

But this has been on-going since...well damn...ever since I began my journey into making oil.

First @GC... 3-4 years ago
Lots of talk..no pics...just pics of a” work space”

I'm putting my faith in you Oilmkr...
Lets see this bad ass king of concentrate in some images...
Please!!!

I'm pulling for you this time man, don't let me down.

Personally...I wanna see the GSC....

MAKES AMAZING CONCENTRATES, with proper genetics, grower etc...

i am not putting my faith in you....

oilmkr420 said:

Optimal weight is 10-45 grams of plant matter, about 1 1/4 lbs of co2 and can be hit 2 or 3 times before its depleted from this vessels pressure capability. Its rated rather low, but for a cheap thrill, the unit performs better than any butane extraction can do in all aspects. What do you expect when using 2kpsi along w specific co-solvents like Freon 113, and ethanol the expectations should be high as a formidable competitor and reigns supreme for extracting. I will be making that instructional dvd tomorrow w a COPD the factor at hand and easily slapped down from mmj/co2 collaberation very close to the relationship that gold and mercury share.

Click to expand...

Thanks for filling in some of the blanks and pointing out your use of Freon 113 as a co solvent. Could you answer the rest of the questions as well?

How much does it hold? 10 to 45 grams,

How much CO2 required per cycle? 1 1/4# per cycle, or 3 3/4# per extraction.

What is the yield per cycle?

How long is the cycle.

How many cycles to fully extract the material? 2 to 3

What temperture controls does the customer have to provide?

Water bath, thermometer, 2-3 cycles at this pressure of 1800-2500 psi would render the extract done for this vessel. I would only hit it at 6k-10k from other vessels rated for such work. 1.25lbs-2lbs can fill the unit depending on initial fill. Cycles can be 5-15 mins up to 24 hrs depending on preferance or work needing to be done. Still haven't had access to a scale to verify results as everyone is usually to excited to eagerly sample product, and me too the way that stuff was smelling.

i read a few ways of this on google. the cost and safety is a huge concern. can you show your video? i want organic and freon is nto organic. if you use freon tell me so i can drop this form my sub list.

dear got your numbers are very.... wide...
holds 10 grams to 45
and the cycle is 5 mins to 24 hours

and what about yeilds

DCobeen said:

i read a few ways of this on google. the cost and safety is a huge concern. can you show your video? i want organic and freon is nto organic. if you use freon tell me so i can drop this form my sub list.

Click to expand...

Hello DC!

Go ahead and un-sub brother....
There is no video, pictures or product...

So much for my faith.
Thanks a lot Oilmkr.

My vessel holds 3-115 grams...
I can utilize any liquid to extract the best oils.. As long as it's cold (anywhere between 5°-215° F)

It takes anywhere between 35 seconds and 47 days for a cycle..

You can run between 9-62 cycles...
Yield is always around 3%- 79% return...(varies with ambient temps)

I can actually make more concentrate than the starting material..
For example, I can take 5 grams of flower and create 14. 7 grams of the best concentrate ..
Yup..

EDIT: SARCASM

Ha!!

lol SDA love you man but lookie what came in to work today!!!



The Compressor for the Co2 machines

^^^
See, that's what I'm talking about...
Pictures to prove it.

R&R stepping their game up.....
Noice