my first butane oil extraction

MRsteverson

Well-Known Member
hey guys i got 36 grams of the highestquality trim... i am thinking of making a pollinator out of some pvc with some end caps.. the usual design..

does anyone know how much oil i should expect and does anyone have any tips forme?
 

MRsteverson

Well-Known Member
hey guys i got 36 grams of the highestquality trim... i am thinking of making a pollinator out of some pvc with some end caps.. the usual design..

does anyone know how much oil i should expect and does anyone have any tips forme?
used 12 oz of high quality butane and got 2" by 7" pvp with two endcaps... used a coffee filter at the bottom.... it worked but the oil was darker then other oil i have seen before.... i think i might have done something wrong... i will try it again
 
O

odinfolk

Guest
It's a pretty simple process man. Fill your tube with good shake/trim and simply squirt your butane through and all the oil will drip onto a plate or whatever surface you choose, let it sit for a while to let the excess gas whither away, and then simply scrape it up...I got it down pat my first time :-)
 

Supgee3

Well-Known Member
I used the honeybee extractor, its nice and its cheap $30 bucks I think.
Put a coffee filter in the bottom, put your trimmings and busted stems and weed in the jar... shoot 2 cans of butane through it into a glass pan sitting inside a bigger glass pan with boiling water (to boil away the butane), wait an hour for it to boil away, smoke your oil and get blitzed. :bigjoint:
 

MRsteverson

Well-Known Member
I used the honeybee extractor, its nice and its cheap $30 bucks I think.
Put a coffee filter in the bottom, put your trimmings and busted stems and weed in the jar... shoot 2 cans of butane through it into a glass pan sitting inside a bigger glass pan with boiling water (to boil away the butane), wait an hour for it to boil away, smoke your oil and get blitzed. :bigjoint:
i used fan leaves from trimming.. i didnt think it was as potent as the stuff u guys are making.. not much of a fan first time around... we will see how it goes next time
 

Supgee3

Well-Known Member
The way I did it, it turned out perfect.
Nice golden amber colour, the smoke tasted sweet almost sugarish - and it got me blitzed.
A++++

On a side note, I have 40g of stems and I'm gonna add 1 oz of weed and make oil pretty soon. :)
 

MRsteverson

Well-Known Member
The way I did it, it turned out perfect.
Nice golden amber colour, the smoke tasted sweet almost sugarish - and it got me blitzed.
A++++

On a side note, I have 40g of stems and I'm gonna add 1 oz of weed and make oil pretty soon. :)
how much oil would u get from a ounce of high quality bud?? and do you grind it up or leave the nugs whole
 

Supgee3

Well-Known Member
grind it all up, even the stems.
i dunno its hard to say... 1 oz of weed is like 7g of oil, depends how much butane u use.
 

manlookingj

Active Member
I have always wondered that using this extraction method, does it extract what ever resin/thc content is in said weed. For example if you put in a once of bud you get so much oil, but with shake or low quality trim you get much less oil, but the oils are as potent as on another. Am I thinking this right?
 

MRsteverson

Well-Known Member
I have always wondered that using this extraction method, does it extract what ever resin/thc content is in said weed. For example if you put in a once of bud you get so much oil, but with shake or low quality trim you get much less oil, but the oils are as potent as on another. Am I thinking this right?
the higher the quality of bud that goes in the better the oil will be.... everyone gets different amounts.. i would definitely try it with an ounce if i get like 7 grams of amber honey oil... yummm and the butane binds to only the thc and extracts it out into the butane... once the butane evaporates pure thc baby
 

stumps

Well-Known Member
For my set up I use 3/4x14" pvc. drill 5 holes in the bottom cap and one hole for the top. Put a coffee filter on the tube before the bottom cap. you want the scrap/bud dry and gound course fill the tube very full but not packed. I use 3 10.6 oz cans.
 
Top