Boatguy
Well-Known Member
Just checked my order history. I used a 100k pot with no resistor. I think you are right about 2 drivers needing a 50kPositive gets resistor and always goes to middle pole. The negative goes to the outer pole, what side you choose determines which way will dim it to 0%.
And yes there's another resistor underneath, because those were 5.6K, so I had to use 2 to get close to 10K.(11.2)
Also, I can't remember if you're wiring 2 drivers to one pot, the pot has to be a 50K ohm pot, so I think the resistor is a 5K. I thought you doubled up on them for a second but that doesn't seem right.