thelastride67
Active Member
Bubblegum Feminized Auto flower - from Marijuana Seeds NL
My first time really attempting a grow with all of the proper equipment and necessary materials needed to pull off a successful operation that yields a decent bud.
Built the light out of a mailbox and two security lamps. Required some metal shears and some rivets, rivet gun, drill and some bolts. All connections properly made using wire caps and ground throughout. If anyone wants information on it they can PM me for the link. basically ~~ 150 watt hps with a separate ballast built for about 100-120 dollars. Works well for my tent grow because i can keep heat source outside of plant environment.
DIY aeroponic sprayer system for delivery of nutes to the root system . plants suspended in 3in net pots in rubbermaid tote. return pump in plant res to send unused nute water back to the main reservoir (circulation). also airstone in plant reservoir as well for good oxygenation.
main res
larger pump approx 450 gph. connected to a NFT timer that turns sprayer on for 1 minutes off for 4. allows root system large amount of oxygenation which will aid in nute uptake.
ph at 5.9-6.1 ...... TDS~~ 200ppm... ( my tap water is decent with a ph of 7.0 and a base ppm out the spout aat 150. so my calculation says 350 on the meter - 150 (base ) == 200 ppm (actual nute mix)
using lucas formula for GH nute trio.
got one seed in popped and sprouting in rockwool cube.. pics attached... other is in cup of water wait to pop, dropping in the cube tomorrow.
temps at 77-85 degrees... with a relative humidity of 53-59%
have a inline fan , fan controller and carbon scrubber in route... should be here by end of week ... that will be necessary to exhaust the hot air and create negative tent pressure which will make the tent pull more cool air in from bottom intake flap. ...
tent is approx 2'w x 4'L x 6'H
cant wait to see what happens... am happy to finally get a journal up here...
any members feel free to pm or post with questions or advisories. I am happy to have access to such an awesome community of fellow growers, DIY'ers and knowledgeable people. This is my first time growing start to finish with all the proper tools to ensure an excellent habitat for the plant. I am excited to see how this could turn out! thanks ... ill be posting again next time i have updates .
My first time really attempting a grow with all of the proper equipment and necessary materials needed to pull off a successful operation that yields a decent bud.
Built the light out of a mailbox and two security lamps. Required some metal shears and some rivets, rivet gun, drill and some bolts. All connections properly made using wire caps and ground throughout. If anyone wants information on it they can PM me for the link. basically ~~ 150 watt hps with a separate ballast built for about 100-120 dollars. Works well for my tent grow because i can keep heat source outside of plant environment.
DIY aeroponic sprayer system for delivery of nutes to the root system . plants suspended in 3in net pots in rubbermaid tote. return pump in plant res to send unused nute water back to the main reservoir (circulation). also airstone in plant reservoir as well for good oxygenation.
main res
larger pump approx 450 gph. connected to a NFT timer that turns sprayer on for 1 minutes off for 4. allows root system large amount of oxygenation which will aid in nute uptake.
ph at 5.9-6.1 ...... TDS~~ 200ppm... ( my tap water is decent with a ph of 7.0 and a base ppm out the spout aat 150. so my calculation says 350 on the meter - 150 (base ) == 200 ppm (actual nute mix)
using lucas formula for GH nute trio.
got one seed in popped and sprouting in rockwool cube.. pics attached... other is in cup of water wait to pop, dropping in the cube tomorrow.
temps at 77-85 degrees... with a relative humidity of 53-59%
have a inline fan , fan controller and carbon scrubber in route... should be here by end of week ... that will be necessary to exhaust the hot air and create negative tent pressure which will make the tent pull more cool air in from bottom intake flap. ...
tent is approx 2'w x 4'L x 6'H
cant wait to see what happens... am happy to finally get a journal up here...
any members feel free to pm or post with questions or advisories. I am happy to have access to such an awesome community of fellow growers, DIY'ers and knowledgeable people. This is my first time growing start to finish with all the proper tools to ensure an excellent habitat for the plant. I am excited to see how this could turn out! thanks ... ill be posting again next time i have updates .