BHO Shatter VS Rosin

DemonTrich

DemonTrich

Well-Known Member
I spent 175 for the press plus a 3yr warranty, and 380 for my plates. Can't get a better deal than that. Oh, and 17.00 for grade 10 hardware vs the grade 4 that the press comes with.
 
wsntme

wsntme

Well-Known Member
Airwalker16 said:
Just how are your plates made? Where's you get the press and what mods did you do to it, and how'd you build the frame?
Click to expand...
Everything was made with parts from Amazon, metal from a supply house, and a Harbor Freight drill press ($60).

Plates are 3"x1" circles. Heaters are 8mm by 60mm , 120watts (2 per plate). 1 K-type thermocouple per plate. The computers (PIDs) are MyPin TA4-RNR which have build in mechanical relays, no external SSR to deal with (I don't mind the click on/off). Electronics are wired just like an Enail, you can actually use a "DIY Enail Wiring" guide.

I used wood between my platens and frame for thermal insulation and it works awesome! I can leave my press on over 24hrs and the frame does not heat up.

The frame was build by me on the fly with a half-vision in my head. It quickly evolved into what you see. It's all powered by a 12T bottle jack from Harbor freight.

Total cost (excluding drill press) ~$180
Total Weight - 35Lbs .
 
Last edited:
Airwalker16

Airwalker16

Well-Known Member
wsntme said:
Everything was made with parts from Amazon, metal from a supply house, and a Harbor Freight drill press ($60).

Plates are 3"x1" circles. Heaters are 8mm by 60mm , 120watts (2 per plate). 1 K-type thermocouple per plate. The computers (PIDs) are MyPin TA4-RNR which have build in mechanical relays, no external SSR to deal with (I don't mind the click on/off). Electronics are wired just like an Enail, you can actually use a "DIY Enail Wiring" guide.

I used wood between my platens and frame for thermal insulation and it works awesome! I can leave my press on over 24hrs and the frame does not heat up.

The frame was build by me on the fly with a half-vision in my head. It quickly evolved into what you see. It's all powered by a 12T bottle jack from Harbor freight.

Total cost (excluding drill press) ~$180
Total Weight - 35Lbs .
Click to expand...
So you're using peltiers?
 
blackforest

blackforest

Well-Known Member
Where do I get the plates/dies? I can get a hf press with a 20% off for less than $100. Need some blocks to press into. My goal was to press some blonde kief into thin hash bars with rosin as the residual.
 
wsntme

wsntme

Well-Known Member
Airwalker16 said:
So you're using peltiers?
Click to expand...
No, just chunks of metal that I drilled holes into, then inserted cartridge heaters. Each heater is 120watts and measures 8mm x 60mm .

blackforest said:
Where do I get the plates/dies? I can get a hf press with a 20% off for less than $100. Need some blocks to press into. My goal was to press some blonde kief into thin hash bars with rosin as the residual.
Click to expand...
Industrial Metal Supply is the store I bought the chunks of round stock from, them I drilled/bored holes into them with a drillpress for the heaters and thermocouples to slide into.
 
GuyLeDuche

GuyLeDuche

Well-Known Member
If anyone is interested I know a guy on another forum who makes custom plates for vises, arbors, etc from CuNi with a pretty clever design for the low buck builder. His plates use 2 60w soldering irons for heat sources instead of costly PIDs, they are slower to heat (20mins) but cost $11 to replace vs whatever a PID costs ;). I can't say what he charges, it seems to depend on the persons needs, but I have seen happy customers who spent under $300 for their whole build, arbor press included...

Here's a quick snap of one of his first plates and a link:




http://fuckcombustion.com/threads/custom-copper-nickel-vise-and-arbor-jaws-for-rosin-tech.19491/


I'm not a customer or in any way pushing product, just putting it down if anyone wants to pick it up ;)


EDIT: Looks like about midway in that thread he states they go for $150 shipped through PayPal...And they look more like this now:


 
Last edited:
You must log in or register to reply here.
Top