...All Things Vero...

Interestingly no. There's a small section near the end of the Pico plug that is 28AWG.

Vero 29 v2 available now at kingbrite http://kingbriteled.en.alibaba.com/ $28 but price will go down. I'm working on it

Oh yeah I got my Vero 29 v2 4000k today. I just need to buy the right driver. I have Meanwell 700ma right now, I need 1400 right? or what you would suggest for 10 of them?

I'd turn up the juice for those Vero29s, 1800+mA.

Bonjour
Thanks, is it ok if i take the 0, 458 28→20awg for Vero10? Is it mean that I have to wire them in serie with 20awg?
And which wire size is the best for safety?
Have a great day★

GFS_Nic said:

Hello everybody,

I would like to install a dimming option on my panel, i have got two HLG-B drivers, so i will install a potentiometer (100K ohm) on each one, i want to dim them separatly. I found some portentiometer but i'm not sure about the details:

View attachment 3445485
Do i need to choose the "Mono 0.2 W" or the "Mono 0.1 W" ? Is it enough for our use ?

Thanks in advance for any help.

Click to expand...

Yes, looks like a 100k ohm pot
I have seen that with open the current exceeds the rating current. Got 2.25 amps from a 2.15amps LPF-90
Is 10K resistance in series with POT recommended?

Drivers arrived, rack is cut yet to be assembled, waiting on heatsinks.

Going with 3 vero 29 4k's Probably only needed one for my space but I didn't want to order more in the future. Drivers are CEN-100-42 seen them suggested on here and figured I'd try them.

So I couldn't hold out I tried my LED I had fastened to the one heatsink I did receive holy moly is she bright as heck.

Thanks to all the LED head's that showed the ropes and made it so damn easy that even I could do it.

Assembling the rack in the morning and going to get this single LED on there and run it for 24 hours straight and see how it performs. I'm worried about my application of thermal compound I should have just put a glob in the middle instead I tried to spread it and used way more then needed

Should RIPPLE & NOISE be a concern?
R&N 4Vp-p for CEN-100-42
R&N 200mVp-p for LPF-90-42

from....http://www.ledlightforyou.com/Downloads/data/Publications/TI-The-Impact-of-Low-Frequency-Ripple-Current-on-LEDs-and-LED-Drivers-10-28-2010.pdf



Summary

Current ripple does not have a major effect on: – Color coordinates, or CCT

Current ripple does effect:

• – Lumens, Efficacy – but very minor effect
  
  
• – If PDIS is not regulated (as it was in this experiment), increasing the % ripple will increase the LED TJ
  
  Current CFL technology has high levels of optical ripple compared to typical LED levels.

doesn't appear too worrisome..

REALSTYLES said:

Oh yeah I got my Vero 29 v2 4000k today. I just need to buy the right driver. I have Meanwell 700ma right now, I need 1400 right? or what you would suggest for 10 of them?

Click to expand...

Veros can handle 2.1A easily but the drivers are expensive so you'd better stick with HLG-185H-1400. Adding Veros is simply cheaper than adding drivers, with the side effect of having better efficiency.

3 or 4 units could we stick together with the HLG-185H-1400 ?

Really superb results (for me) on this first complete vero 29 grow.

Shig87 said:

3 or 4 units could we stick together with the HLG-185H-1400 ?

Click to expand...

Hey Shig!
I'm using 3 because 4 are a bit over the limit. I think this it could be too much if they at coldstart situations. But you can lower the current a bit to get the needed voltage below 36v, but maybe with a few watts less.

alesh said:

Veros can handle 2.1A easily but the drivers are expensive so you'd better stick with HLG-185H-1400. Adding Veros is simply cheaper than adding drivers, with the side effect of having better efficiency.

Click to expand...

Can you, like Supra already did, confirm that (4) V29 work on (1) HLG-185H-C1400? Who else tried that?

ty Randomblame
it would be nice 2 know that 4 x Vero 29 v2 work with the HLG 185H C1400

Vero's lineup has more red instead of Cree's lineup has more blue
i would rather use cobs who has more red for a grow than some who has more blue in a warm white COB
doesnt matter if they got more lumen/lux / whatever if they are near each other and they are actually

ps: testiclees the buds look really wonderful

@alesh
Does your HLG-185H-C1400 work with (4) Vero29?

Shig87 said:

ty Randomblame
it would be nice 2 know that 4 x Vero 29 v2 work with the HLG 185H C1400

Vero's lineup has more red instead of Cree's lineup has more blue
i would rather use cobs who has more red for a grow than some who has more blue in a warm white COB
doesnt matter if they got more lumen/lux / whatever if they are near each other and they are actually

ps: testiclees the buds look really wonderful

Click to expand...

Bonjour
Interesting affirmation!
Is anyone have both cxa/b and vero at equal wattage?
It will be interesting to know which one make the more gr/W!?$
Have a nice day★

A few photos that are a little over due...

Enjoy!

AquariusPanta said:

A few photos that are a little over due...

Enjoy!View attachment 3447991View attachment 3447992 View attachment 3447993

Click to expand...

Oh Yeah! Im ready for one those!

227 from the wall for 2x3 coverage? The sliders on that are brilliant!