9 CXM-22s using HLG-600H-54B

N

nu2grow_ak47

Member
I just finished framing 9 CXM-22s in a diy. I tied them all together in parallel. Pulled the HLG-600H-54B led driver out of its box for the 1st time and see that it has 2 output power sources. Will the driver supply the 11.2Amps it is rated for if I wire all 9 CXM-22s to only 1 of the output power sources?

Or do I wire 4 CXM-22s in parallel to 1 output power source and the other 5 in parallel to the other output power source?

Any help is greatly appreciated.
 
nfhiggs

nfhiggs

Well-Known Member
nu2grow_ak47 said:
I just finished framing 9 CXM-22s in a diy. I tied them all together in parallel. Pulled the HLG-600H-54B led driver out of its box for the 1st time and see that it has 2 output power sources. Will the driver supply the 11.2Amps it is rated for if I wire all 9 CXM-22s to only 1 of the output power sources?

Or do I wire 4 CXM-22s in parallel to 1 output power source and the other 5 in parallel to the other output power source?

Any help is greatly appreciated.
Click to expand...
Since we established in your other thread that they are connected together internally, you can do it that way, or if the wires are a large enough gauge you can use one set. Either way will work.
 
You must log in or register to reply here.
Top